Hi Most excellent software. I'm experimenting with a PlutoSDR and have the satellite software as part of 3.0.17 operating. I note that when I apply a tracking of a sat, the centre freq updates on the

Nils, Which XML file? Simon Brown, G4ELI https://www.sdr-radio.com

I'm hoping someone using an Anan 8000 would be kind enough to share their transmit settings with me. I had everything working but inadvertently made some changes after a Windows 10 update that fouled

GERN ... am besten gleich ... dg9bfc sigi Am 19.12.2019 um 13:13 schrieb Frank Schneider:

Hallo Simon, That was it. Somehow, the tx offset in the converter definitions got lost in the process, and I didn’t notice. Siggi, werde trotzdem mal anrufen 73 Frank From:

Simon, Any change you will be supporting the Elecraft K4 next year? Mike N2MS

Yes

I have eliminated the virtual serial ports by connecting Omni-Rig directly to the radios physical com port. No other apps pause. Spectravue works fine as does HDSDR Gregg

Have you tried the view menu signal meter settings? {o.o}

One other thing comes to mind - are you using the correct communications protocol for the K3? {^_^}

Put altogether that might be enough for Simon to diagnose it. I don't know why that should cause a display pause. As a wild guess it sounds like something hung up spinning in a small loop looking for

Hi - as there is some discussion about PC power, V3 and performance, I did some observations with two different PCs, performing the same tasks with V3: Desktop: Intel i7-8700@3.2 GHz, GTX 1050 Ti

Hallo Sigi, Ist vielleicht besser, wenn ich das per Telefon zu erklaeren versuche. Falls du willst. Schicke mir deine Nummer anfrank@... Whatsup geht auch 73 Frank From:

Hi, Incorrect configuration. See: https://www.sdr-radio.com/Console/EsHail2 Simon Brown, G4ELI https://www.sdr-radio.com

Yes, Sadly it’s the firmware which Phil isn’t going to update I believe. I have to flip to TX quickly which then brings RX back to life. I currently use the ANAN 10 which has a bigger FPGA

I have an idea: Don’t install every pre-release that appears. Also, SDR Console uses WASAPI, SDRuno uses other APIs. What is the audio hardware you use? Simon Brown,

Connected SDR-Console to DXtreme using virtual ports. All looks good. Using the DXtreme Monitor Log 12, I can double click a frequency in the database, and the SDR-Console frequency display changes

Some how it got turned off, hrmm is this the only way to get it back ?