Hi Simon I've got now the correct INI-File for my IC-9700 in order to use Omnirig (see attached INI-File). Now the freq. is synchronized either by using the SDR Radio Console or with the VFO knob at

Good one.

Sorry, this was not where I was meaning to send that. -- Mike

Starts tomorrow. -------- Forwarded Message -------- Subject: [airspy] Black Friday 2019 Offer

Running mine as servers, so nobody there to switch antennas when one goes up into the VHF range. Two antenna ports fixed that problem. I had the HF+ but was destroyed in a lightning hit, so have two

Hi, In January 2020 I will start a wish-list 😊 . Not now. In January 2020. Simon Brown, G4ELI https://www.sdr-radio.com

Simon, Get out your crystal ball, and plan for retirements creep. J 73, Jim K9GCS jbroyles@... k9gcs@... "Nihil sub sole novi"

At least Simon is getting a LOT of input on WHAT the S/W should do :-) He ought not live in doubt about the wishes. 73 / Ingolf, SM6FHZ

I observed this at the station of a friend of mine in a similar way. It seems to work, but SDR console does not respond every time the knob of the FT-818 is tuned. Sometimes it works, sometimes not. 

Follow the link: https://www.sdr-radio.com/ Simon Brown, G4ELI https://www.sdr-radio.com

Thanks info. I just found that the Teensy can do function keys, CTRL, complete messages so I'm ready to try. -- 73, Bo W4GHV since '54

https://swling.com/blog/2019/08/airspy-hf-vs-hf-discovery-ivans-blind-daytime-propagation-comparison/

From the news today the 1.33 version is ready that suports the new RSPdx Just read he page 2 for the upgrades https://www.sdrplay.com/docs/SDRplay_SDRuno_Release_Notes.pdf

Thanks for comments all. Very interesting. Jose, it had not occurred to me that the Lite is only 12 bits. I will keep that in mind during any decision. Although of course it is very competitively

Was toying with the idea of getting the HF Discovery, a particularly if they run a deal this week! Note from their site that the HF+ is still $30 more expensive (at standard prices). Is this simply

I'd like to register my sincere sympathy to you Simon! 73 Max

Hi Simon Just to let you know that I will be getting the SDRplay RSPdx also, hopefully in the next few days. Regards Len Davis

Simon Brown, G4ELI https://www.sdr-radio.com

And, I can confirm my LimeRFE board to be working, providing ~33dB of gain at 2.4 GHz. Below a screenshot of a small application I wrote to drive this board. Simon Brown,

Bob, If needed I’ll buy one to add support, I expect it’ll be almost 100% compatible with the existing radios, ifr not then a minor change. Sooner or later I must implement the latest API