One of my cameras shows up as a CDROM, also I have a mobile phone which does the same. Simon Brown, G4ELI https://www.sdr-radio.com

You have a CDROM drive? And you have not fed it a disk? That's it's icon. {^_^}

It basically means that the application is tied up in a processing loop of some sort, which may or may not exit, and not pulling messages, like button presses, from its message loop AND not adding

If you are speaking of RTL dongles there are two tools to allow you to give each one a different serial number - for most brands of dongles. In the same packags that include rtlsdr.dll from the

Hi, I’ll answer your issues today. In brief – the downconverter value selected for your LNB needs adjusting a bit. Simon Brown, G4ELI https://www.sdr-radio.com

I have the same problem with RSP2. Also the AM squelch now seems to be a problem

One thing – you appear to be using a very old version of Windows. Simon Brown, G4ELI https://www.sdr-radio.com

Hello Siegfried, absolutely there are some workaround ways but As I mentioned, 'it would be good to have' such a ruler to find the right frequency easily. And sure much more practical.... And the

I asked Windows. Windows replied, “DUHHHHH”. I figured that perhaps Windows APIs offer multiple “Save as…” dialog choices. Oh well. Bote

Bote, This is a Windows UI, best as Windows what’s happening. Simon Brown, G4ELI https://www.sdr-radio.com

I have no idea what the BD-ROM drive claiming to be G: is. A device on your system has a read only memory! Thanks Steve m0zeh

And you didn’t provide a screenshot, so I have no way of helping ☹ . Simon Brown, G4ELI https://www.sdr-radio.com

From: Bote Man Related: a Windows developer a long time ago told me that ???Not responding??? simply means that Windows is not updating the application window because it is busy doing higher priority

Last known (or used) value. So if you shut SDRC down, and power it up again, the star is where the value was at shut down. If powering up SDC for the first time, or first time with a new definition,

Gentlmen, The only thing that I have noticed for a few versions is that SDR Console has issues with a SDR Play RSP1A. Seams like SDR Console has troubles with keeping the AGC under control. Certain

I noticed the slowdown as well. On point of interest though. After installing 13, I reinstalled 12 in a different folder (to confirm the waterfall issues), and noticed 12 is now very

Simon, Please see the attachments. When adjusting the size of the analog S-Meter, the height of any receivers underneath it on the band scope aren't adjusted to align with the lower edge of the

about the beacon not in the window press minus button in geo beacon till you have max zoomed out ... if your lnb then is still very far out ... then just type in the lnb frequency

Heeeeeeeee ??? I'm not sure about your comment ! What you mean with "None of the memory frequencies are visible in the screenshot! This is why you do not see markers." ??? See attached

Thanks. None of the memory frequencies are visible in the screenshot! This is why you do not see markers. Simon Brown, G4ELI https://www.sdr-radio.com