That did it! Thanks so much! I'm not too familiar with the Lime. I'm thinking the Pluto is going to be my next purchase. For $150 it looks like a huge step up from the rtl-sdr: larger frequency range,

try with low bandwidth ... and try different buffer settings i can tx in fullduplex on a "crappy old slow core2duo laptop" (over 10 years old!) so if that works here ... any newer pc

I would thank Simon for Ver 3.06 because I can now get 'on air', and feel confident that any remaining issues will be resolved. It works very smoothly with Win 10 on a PC with an Intel Core i5-8250U

you switched to wfm ... but you have to switch to bfm (broadcasting fm) to hear local stereo fm stations in wfm you do not have the needed bw available that you have to use for

If the external radio is power off everything works, if the external radio is online or does not responding it crashes. With the old version this did not happen or rarely, is now

SDR Console Version: 3.0.6 SDR HW: SRL-SDR.com V3 dongle (RTL2832U) Computer: Lenovo Thinkpad, Windows 10 Default BW: 2.4 MHz I recently installed SDR Console and I really like the interface. So far,

Firstly my thanks to Simon for the ongoing work and also to add to Roberts comment. Whilst having no problem getting the Lime mini to transmit I do agree with the observation regarding its

I’ll look at this soon. Simon Brown, G4ELI www.sdr-radio.com

What happens if you do not use the external radio – switch off / disable? Simon Brown, G4ELI www.sdr-radio.com

Ah, Maybe big electrostatic event of some sort? Simon Brown, G4ELI www.sdr-radio.com

RIGHT ! Your ELAD receiver may be the problem. That is why I sold MY ELAD Elad SDR receiver. SCR-Console works swell with all my other radios. Just saying ... GOOD LUCK. K8JHR

yepp ... use sdrangel for receiving datv ... but for nb ... i would say sdr rc v3 is much easier in use for rx and tx greetz sigi dg9bfc Am 19.03.2019 um 23:15 schrieb

hmm ... i can send with the pluto in 550kc bw used in duplex ... on an old core 2 duo laptop with 4gb ram and only 1.8ghz clock receiving only works with 2.1 megs bw the problem here

Hi Siegfried, I also got it to work on the Win 7 PC but there appears to be a lot of latency that is perhaps due to it being slower. At 'run' it is producing +3dBm of something which may be related to

Selling a new CMD PL-1. Works great with SDR-Console and gives you several functions for your SDR. Please see: https://www.sdr-radio.com/Console/MIDIControllers If interested, please contact me

you have only engaged sync mode ... but not sync frequency (if i have seen your screenshot correct) and your tx and rx do not show same frequency dg9bfc sigi Am 19.03.2019 um

hmm i already told simon that the rx mute does not work when you add the tx offset (enable it) so ... if using the tx offset ... then the tx is switched to fullduplex even if you select

Hi Gerhard, Not sure what I did, maybe restarting after docking the TX window, but it is working now on the Win 10 machine! 73 Robert

Gerhard, I'm not sure what you mean by 'include the TX window into the main window'. It can either be allowed to float but if I apply 'docking' it is part of the main window. Am I missing

Hi Gerhard, I use the Lime Mini with the Portsdown too and it works very well. It works also with DATV Express although the SR minimum is 175 K. If SDR-Angel is an alternative for NB I would try it. I