My sever is running i think the problem is with my computer

Hi Brent SDR Console (V3) has now started freezing when I start it up for me too. Then about 30 seconds later my whole PC crashes with the Win 10 blue screen message explaining it has to restart. Can

I wonder if there is any adjustment of squelch when using FM to reduce the "squelch tail" noise. I assume the squelch would need to activate "faster" to reduce it. It is quite a bit "louder" than

Mike, I *will* look at this, but for today and tomorrow I’m busy with some other code. One thing I noticed with the Lime Mini is that it must be cool. Simon Brown, G4ELI www.sdr-radio.com

Office desktop results the same and I just did a clean SDR install. Intermittent twin peaks when changing frequencies. Caps and log for review. Anyone else with a Lime-SDR Mini reading this? I am

G4ELI's ServerLocation is Mawnan Smith, Cornwall. Website is www.sdr-radio.com . Antenna is Wellbrook Loop. Running on my e-mail server (same PC which runs the On-Air server). I am occaisionally on

QSL, Simon. Thanks. More info for now: I tested it on the mobile laptop and got the same result. Attached is the log and the screen cap. I'm going to try my work desktop over lunch. Mike K6MSM

Hi Mike, I’m a bit busy at the moment, this is high on my to-look-at list. Simon Brown, G4ELI www.sdr-radio.com

Hi Simon, What would you like to see from me next? I will try the Mini in the car to see if I can duplicate the result on that laptop. Mike K6MSM

I can only agree with those who have already said that most of the noise is coming from the houses in the neighbourhood. You yourself can take all efforts to avoid noise in your own house (filtering,

When you plugged the USB cable from the SDR-iq into computer, did it load the drivers? Once the proper drivers are installed, the yellow LED over the antenna symbol will slowly pulse. If no drivers

Now using SDRAngel with Pluto on win 10 and it works for RX and TX. Nice little signal generator. Stefan

I just tried my SDR IQ and it will not work but it used to my HF plus works fine so will Elad ....

Thanks. Simon Brown, G4ELI www.sdr-radio.com

Hi Simon I just tried it and it is working again, like it was with the Version before, really strange. I had not reboot my PC after upgrading to 1234, because I never done this and it should not be

There's a very professionally written article by the author of linrad SDR about suppressing computer EMI here: http://www.sm5bsz.com/linuxdsp/hware/quietpc.htm. On Monday, September 3, 2018

Ah, Very interesting, thanks. Simon Brown, G4ELI www.sdr-radio.com

HI to all. I have microham interface with two cat ports....running log program and sdr console with sdrplay and Omnirig. I have also VSPE program. My question.....how to create another CAT com port?

On Thu, Aug 30, 2018 at 04:45 AM, Gert Gremmen wrote: FWIW - Regarding the comment: Try to avoid USB completely. It is unbalanced, fast and therefore contains too much harmonics.... USB data physical

Had stopped using SDR console Do to Freeze up on start up now fixed for me any ways .In program option at bottom of page the box marked Priority was checked i uncheck the box today restarted program