Hi All, A few weeks ago, I start the digital mode interface – just a small window where I can develop PSSK / RTTY etc. before making a nice big digital mode display. Anyway, I found that some of

Using RSP2 Pro. Because of the varying noise level at HF and VHF at my location and with my limited HF antenna at present, I operate with 0dB visual gain for VHF and for HF where the noise is higher I

Sounds like a plan! Thank you! Stefan, VE4NSA

2018 ARRL/TAPR DCC (Digital Communications Conference) http://www.tapr.org/dcc September 14-16 Albuquerque, New Mexico Call for Technical Papers & Presentations at DCC The ARRL and TAPR DCC is

Hi, I’m working on something which may help – just stay tuned. Simon Brown, G4ELI www.sdr-radio.com

Using latest version of SDR CONSOLE on top of W10 Home version 1803. CPU is a i7 6770, 16GB RAM and 1050Ti graphics card. SDR used is AirSpy latest public firmware, sampling at 10MHz. In general v3

I’ll look at this issue soon – I have an idea what’s going wrong. Simon Brown, G4ELI www.sdr-radio.com

Same result here. Recorded full pass of NOAA 19 with V3 of the software. Using IC-R8600. When piping audio via VAC to WXtoImg getting only distorted output either live or recorded. Tried different

Sent from Mail for Windows 10

Home ribbon, Screenshot (camera Icon). This

SDRconsole used below the black line, then switched to SDR# above the black line. Sent from Mail for Windows 10

Playboack of original recording Sent from Mail for Windows 10

John, There’s an option in the console to take a screenshot – any chance you could use this? It’s a tad difficult to see the settings like this. Simon Brown, G4ELI www.sdr-radio.com

Here it is see attached… Sent from Mail for Windows 10

John, Post a screenshot of SDR Console while receiving the satellite. Simon Brown, G4ELI www.sdr-radio.com

Appreciate your reply... Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with Seems to be missing a sync signal . Should have ended up with this , which I get using SDR# .

Setup is from SDRconsole is via VAC to Wxtolmg , and I end up with (see attached) Seems to be missing a sync signal Regards John Elliott

Simon, Thank you. I found the problem. I was addressing the server improperly with the client. Everything works fine now. Len, W1ZTL Please note: message attached From: "Simon Brown"

New problem with Server. Moved the SDR Play to a windows 10 notebook and setup server. When I try to connect there is no response at the remote end. Attached is the log, looks like a read error. I

Hi Simon, Have you been able to resolve the Ordinal error yet please ? Thanks John Daniels