According to the SDR-UNO V3 manual I should be able to save a Workplace, i.e., the size and positioning of SP1, SP2 and the VRZ1. Following the manual's guidelines, I get a message that the

Hi folks. I am wondering if it would be possible to use a wideband SDR like a LimeSDR and the multiple receiver capability of the SDR console to simultaneously listen to a number of HF channels and

Hey .. how 'bout that ! I listened to your QSO from down here in NC. I could just barely here the Scott ... perhaps a 3 x 4 RST. See ya Frank.

It was made by Microsoft. If you want it, it's all yours. I bought it to experiment in the beginning & there is no way that I can use it. It takes a radio o card, like the Ettus. If you would like it,

The same here but in combination with the Icom IC-7300 to have a more detailed waterfall and dual channel with two different antennas to get the most out of the received signals. Using the console

Sadly, this’ll not be in V3 which will be released on Monday. The API will be interesting. Simon Brown, G4ELI www.sdr-radio.com

Never heard of this card. Simon Brown, G4ELI www.sdr-radio.com

Simon, would this by chance be usable for the SORA PCIe card? I will guess not, but worth a try. Never did find much about it. I do know it uses the ettus style radios. Ed

Hi from SDRplay... we will get Simon the info he needs ASAP.... just finalising the new API and documentation... glad you are enjoying the performance of the RSPduo :-)

Outstanding performance by the DUO. I was working SSB DX on 40m last evening and I believe the DUO was edging out my 590SG on receive! I worked a Scottish station who was running 10 watts and a wire.

Thanks for the kind and prompt reply Simon. Pat

Sorry I must have mislead you and I clearly may not be operating this really cool software correctly! I am speaking of a known satellite say FO-29 in which there are a number of stations showing up on

Thank you Bjarne, 73 es 44 , Augusto Il 14/06/2018 08:20, Bjarne Mjelde ha scritto:

one way would be if you can use afc of the sdr soft ... canculate te offset to nominal and add that to the cat signal but then if you use u/v or v/u you also have to add a factor ... so

Hi Pat, I’ll be releasing V3 in a day or three, when it’s out I’ll add project tracking for ideas, bugs etc. Please wait with suggestions until V3 is available as a release. Simon Brown,

Hi Simon es all, Yesterday, I downloaded one of the latest v3 release and noticed that one of my favourite tool is back : the data file analyser ! GREAT ! Some suggestions though : - In the SIGNAL

I have no experience with that particular sound card. However, a better than in-board sound card is very useful, at times critical, when we deal with marginal signal to noise levels. My experience is

Conrad, To compute Doppler the software must know the satellites Catalogue Number which in turn is used to get the TLE data (see https://en.wikipedia.org/wiki/Two-line_element_set), so the answer

Is there a way to select a random RX signal from a satellite on the waterfall, have the program calculate that signal's current TX Doppler frequency, send that through CAT to the external transmitter

I know what you mean Ian, but I'm not ready to use "very" yet! 73 Alan