main@SDR-Radio.groups.io

Re: SDRplay2

Hello, I agree with Paul. I am using SDR Console V3 with my RSP2 on a daily basis since it is supported. I have not encountered any issue so far. Brilliant piece of software! And IMHO: If authors

By frans vink · #35683 ·

Re: Newer (rev 6) Ettus B200 (with AD9364) on SDR Console 2.3 or 3 [1 Attachment]

ok, thanks Barry, I noticed you were running 40 on your screen speed and wonders what size. Looked at the statistics and saw 2 mil. I have a 40"4K and run at 80 for my screen speed. I too love my

By vincent · #35681 ·

Re: Newer (rev 6) Ettus B200 (with AD9364) on SDR Console 2.3 or 3

Hi Vincent, I'm using a 27" Dell like one that Simon has. I drive it with a Gigabyte '1080. There is also a NEC22" off to the left side. BTW, a little while ago I finally realized why I couldn't run

By Barry Jablonski · #35680 ·

Re: Newer (rev 6) Ettus B200 (with AD9364) on SDR Console 2.3 or 3

Not sure whom I'm addressing, as there's no sig line in your post...that said, what USB cable are you using with V3? Per Simon's statement in the link below, "To ensure robust operation of the

By mcayton@... · #35678 ·

Re: Newer (rev 6) Ettus B200 (with AD9364) on SDR Console 2.3 or 3

that would be great Simon, I like using my B200 with V3. Any performance increase is much welcome for us Ettus owners. Vincent

By vincent · #35682 ·

Re: Newer (rev 6) Ettus B200 (with AD9364) on SDR Console 2.3 or 3 [1 Attachment]

Hi, I have an early B200 which works OK with V3, I hope to work with Derek from Ettus next week to improve performance. Simon Brown, G4ELI www.sdr-radio.com

By Simon Brown · #35677 ·

Lost Omni-Rig!

Well I went and did it. I had Omni-Rig working great with SDRConsole v.3 and started playing around with some port settings and God knows what else, and now Omni-Rig has completely disappeared from

By tylerhster@... · #35676 ·

Re: Newer (rev 6) Ettus B200 (with AD9364) on SDR Console 2.3 or 3

Barry, what size monitor are you using? Vincent

By vincent · #35679 ·

Re: Newer (rev 6) Ettus B200 (with AD9364) on SDR Console 2.3 or 3

Hi michi_lumin, I have an older version of the Ettus b200. I forget which chip it uses. It's always a PITA to first get it to work the first time, but when it works it is awesome. Simon will

By Barry Jablonski · #35675 ·

Newer (rev 6) Ettus B200 (with AD9364) on SDR Console 2.3 or 3

So, we're using an Ettus B200 at work where I really need to capture some signals. Ordered it with the impression that SDR-Radio 2.3 and 3 supported the device. It seems I need to get it working

By michi@... · #35674 ·

Re: SDR Console V2 and FunCube

Hello FYI , the cat system works fine You have to set on the Admin Privileges on the .exe programs But now I can heart correctly the ssb I think I have a bad filter but I don't see where

By F6FLU@gmx.com <F6FLU@...> · #35687 ·

Re: SDRplay2

It was working with v 2.3, only device on USB (external) On 07/26/2017 11:19 AM, 'Simon Brown' simon@... [sdr-radio-com] wrote:

By Mark Manucy <w4fje@...> · #35673 ·

Re: SDRplay2

Different "Paul" here..... While I too am a fan of HDSDR, I find SDR-Console V3 works just fine with RSP2 and on a laptop. In fact, I use V3 almost exclusively on my Thinkpad X1 Carbon laptop with

By Paul Goelz · #35672 ·

Re: favorites

Thanks Simon, I guess I need to wait memory banks are installed.. I am using favorites, but I found files I wanted to put in v3and I can not seem to import them. Memory banks would probably sole

By larry hodnett · #35671 ·

Re: SDRplay2

Mark, I assume you downloaded from my website? What operating system – W10? What’s in these popups – there really shouldn’t be any other than the suggestion that you create a radio

By Simon Brown · #35670 ·

Re: favorites

Hi, Setup the radio as you want, then Add a new Favourite. I haven’t added memory banks yet. Simon Brown, G4ELI www.sdr-radio.com

By Simon Brown · #35669 ·

Re: SDRplay2

Paul and others, Although I find V2 and V3 very impressive pieces of software, I find that they aren't modeled after a full featured transceiver/receiver. I find that the

By Alan Predmore · #35668 ·

Re: SDRplay2

Why drive a 2CV when a Ferrari is available for just a small donation? You could take the time to work out the answer and post it back here to help others in the group. Paul N2EME

By paul newcombe <G6YZC@...> · #35667 ·

Re: SDRplay2

By F6FLU@... · #35665 ·

favorites

I want to put a csv file into my favorites. I have tried to import, but it does not work for me. Is there a better way or better instructions on how to import files?

By larry hodnett · #35664 ·

Messages