Oops! I just checked the "crashes when I tune through 1 MHz" - as I'm FM band only normally. It didn't crash going down , but on the way up - in 1 MHz steps it all froze when I got to 98 MHz. SDR is

I think Simon means a whole screenshot of the entire SDR Console, which will likely contain important information giving clues as to your issue. The program has a built in ability to take

Hi Simon, Pls find the screenshot attached With best regards, Sudip Kar

Jim, Thanks for the reply. I wonder what I'm doing wrong. I'll investigate different USB connector options when I get home this evening, but I wouldn't have much of an idea where else to look for a

Fantastic! Thanks Simon! -- Mike

Not experienced that issue here, using v2.3 to monitor 160/80/40 on JT65 with RSP1, and V3 and an RSP2 to monitor 20/15m on JT65. Both work fine together. I use 2.3 for this purpose where I can, as

Simon, Not sure if this has been mentioned, but whenever I have SDRPlay RSP1 and RSP2 both plugged in to my machine then the RSP1 front end is deaf in V2.3. But if I unplug RSP2 and restart V2.3 (and

Simon: Thanks for confirming this. I will download the new version when I see it. I would also like to take a look at V3: I believe I saw a post that I can download that next door with no particular

REMINDER Thank you De : sdr-radio-com@... [mailto:sdr-radio-com@...] Envoyé : lundi 13 février 2017 20:46 À : sdr-radio-com@... Objet : [sdr-radio-com] ZOOM function in VLF with SDR-Radio V3

Hi, If you post a screenshot I’ll be able to see more of the problem. Simon Brown, G4ELI http://sdr-radio.com

Hi Chris, Makes sense – CloudIQ isn’t supported in V2.3, also ‘my’ CloudIQ is still with RFspace. Simon Brown, G4ELI http://sdr-radio.com

OK, Today I’ll upgrade the SDRplay support in V2.3, what you are seeing is a known bug. New kit tomorrow I hope. Simon Brown, G4ELI http://sdr-radio.com

Have you tried different RF gain settings? I think it defaults to max, which is actually minimum gain reduction, if that makes sense.

Thanx for the comments. Maybe I will just run it thru the tuner. I would like to listen to 160M. The other option is to make my own attenuation pad. I think Elecraft also makes one and some other

VERY very Nice Simon Vincent

Very nice! Great software coupled with a nice radio! There you go... a recipe for success :-) 73, Stefan, VE4NSA

Yes, I agree that is an unfortunate part of this high pass filter. But it is a tradeoff mainly due to the high end attenuation frequency ~ 1705 KHz cut off, VS putting up with what appears is a

Hi All, Here’s my 10E in action this evening in Europe. Recorded using the Windows game recorder (built into Windows 10), using a 4k Dell monitor.

Denny, It should be noted that that filter has a cutoff of 2.6 MHz, so the 160 meter band will be blocked. If the 160 meter band isn't important to the user, that filter looks to be a very impressive

ZOOM function in VLF with ELAD FDM-S2 and SDR-Radio V3, 64-bit, 2017-01-08_2122 Bandwidth maxi 6.144 KHz The zoom function does not react in thesame way over the VLF frequency range Do this •