then how difficult is it to remove it? Vincent

Make sure you take the right thing off, someone thought it was the coil you could see, is a smt coil See image for location, it was me, I just pushed on it with my nail and it came off.... MN18 is the

another hint i use a c band lnb for receiving 3.4 gig (has a lo of 5150 megs) so ... with a sup 2400 ... and a c band lnb you can have a very wide band sdr setup with low end

as already noted ... it is just removing a coil on the lime hp some user reported it is an easy fix a user wrote that the coil just "ppped olff" when he touched it but i am guessing

Vincent, Not sure J Simon Brown, G4ELI http://sdr-radio.com

It's not the transformer thats the problem but a low value inductor across the I/Q lines that are next to the transformer.... Get Outlook for Android From: sdr-radio-com@... on behalf of MV Elttba

So Simon, how hard is it to take the transformer out? Should the Lime guys do this and not the customer? Vincent

Thank you, heard about RF explorer I'll have another look. 60mhz? Wow nice. Sent from my iPhone On Feb 11, 2017, at 2:48 PM, Siegfried Jackstien siegfried.jackstien@... [sdr-radio-com]

I already have two sup2400's. I attempted to mod the first one, it seemed to work but something was still wrong or off. I wasn't sure if I did something wrong with the mod but I was gonna give it

Well, I think the bandwidth is actually 20Mhz, this isn’t the exact same chip as used in the B200 (my mistake). Simon Brown, G4ELI http://sdr-radio.com From: sdr-radio-com@...

roughly 60 megs if you just wanna see whats going on on 2.4 gig band ... then use rf explorer ... that can be used as "normal" spectrum viewer ... or as a "wifi analyzer" (shows

buy a dongel with a downconvertor. Goes up to 4.5 GHz, http://www.rtl-sdr.com/receive-up-to-4-5-ghz-on-your-rtl-sdr-for-5-using-a-directv-downconverter/ April 19, 2016 Receiving

did you read the posts? Op 11-2-2017 om 19:48 schreef Joe Puma theprogramllc@... [sdr-radio-com]:

I think it is 20MHz, this is the chip: http://www.analog.com/en/products/rf-microwave/integrated-transceivers-transmitters-receivers/wideband-transceivers-ic/ad9363.html#product-overview Simon

What's the bandwidth? I'm looking for something that will let me look at the entire 2.4ghz spectrum. Sent from my iPhone On Feb 11, 2017, at 4:55 AM, Siegfried Jackstien siegfried.jackstien@...

Hi, Looks like the Lime boys and their supporters have worked out the simple hardware changes to really get the LimeSDR rocking.

Simon: Thank you for the information: I will resist the urge to uninstall in the future. Also, making up terms like "audio crash". Not helpful, I am sorry about that. The screenshots are attached.

Jim, My notes are here: http://sdr-radio.com/OpenHPSDR At the moment I am testing firmware I received direct from Phil H. who writes it. When generally available I’ll let you know. I cannot

Hi, You *never* need to uninstall my software to perform an upgrade. Never. Please explain what you mean by Crash. Does the program stop? I have never heard of an Audio crash before.

Hi Guys This must have been posted before but I cant find it, is the new firmware and Thetis available to be downloaded for the Anan 10E or EE yet, thanks for taking the time to read