Kees, My mistake – this option should not be available for you L . Simon Brown, GK4ELI http://sdr-radio.com

Yes, Both are on, I’ll update the web site with this info. Do you see a need to switch either off? Simon Brown, GK4ELI http://sdr-radio.com

Hah, That sort of failed! I don’t have my HackRF connected at the moment, I thought you should see a serial number when you do a search. Can anyone confirm this? Simon Brown,

I tried a small 500pF tuner in series withthe first coil I picked from the junk box (40 turns on a quarter inch former),a couple of 20pF caps for in and out and a pair of BNC sockets. It worked

I have both-in fact I have two of each and in addition an Airspy Mini. Every so often I compare them with all the software at hand and always come back to using the AirSpy's with SDRSharp. Having 8

If anyone is interested, I have a PAR Hpf and a Lpf I will sell as a set. Contact me off list if interested. Radionut44 at gmail. Ron Biddle KA4RON Sent from my iPad

Hi Guys, Although I am not into HF I have been following the link as noise and strong signals/overload are a problem for us all. I do not know if these will work for the HF guys on here but QLP Labs

True, why do I always look for the more complex solution!! Barry

Simon, here is the log. thanks 15:28:08> Instance 15:28:08> This is the only instance ......: Yes 15:28:08> Single instance mutex created ..: Yes 15:28:08> Single instance mutex handle

Why not fit a small tuning condenser and acoil in a tin box and null the offending signal… You can basically use the receiver as aspectrum analyser to get the best L/C ratio Allan

“Not listening on port” means that some piece of software that is supposed to communicate with something else (like another piece of software or a hardware device) is not listening. Computers use

Thanks for the replies to my questions. They seem to support my gut feel to go with the SDRPlay. Leif mentioned adding a notch filter for the offending AM station (1310kHz) has anyone built one of

Hello, Does anybode know where it's for ( I have a presumption, but not sure) It doesn't do a thing for me "not listening on that port". I cannot find some text in the manuals or internet. Can

Hello: Using Perseus with v3. Is preselector and dither enabled bu default? Tnx a lot.

John, Full logfile entry please. I can then try getting the latest firmware on my HackRF in case it’s been updated and is no longer 100% compatible, but from the error message I think (think)

I went ahead with the firmware reinstall/update https://github.com/mossmann/hackrf/wiki/Updating-Firmware all appeared to to go very smoothly but now I get HACKRF_ERROR_LIBUSB when starting the SDR

Hi Barry I’m new to SDR but decided I’dspend enough money so I wouldn’t feel disappointed with the results. On the grounds you get what you pay for Idecided on the SDR Play rather than a cheap

yes wiggling the connector causes it to crash but it also crashes just by tuning and if I change from fm to am or click amp. perhaps I will start by reinstalling /updating the firmware. then look very

I used the antenna provided with it and also my discone. the connectors are male and female.

G'Day Barry, I have an SDRPlay and despite the plastic box I find no interference finding its way in but your issue does remind me that when I had a broadcast band station bleeding through into HF I