Date   

Re: Band Plan

mathews ember
 

Simon, don't forget a 10-4 good buddy band plan.
Like from 26 Mhz to 28 Mhz.
I do a lot of listening there


Front end preselector for SDRs and wideband receivers

Simon Brown
 

VHF+ preselector: ATEK1001 - We're Live! | Crowd Supply

 

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: RFI from mains ethernet adaptors

Mike N7ZEF
 

Muntz Radio...They were infamous for removing parts that didn't seem to make a difference in operation...Their logo was Napoleon...

73
 Mike - N7ZEF

On Sun, 26 Sep 2021 11:43:09 -0600, Brent Seres/ VE3CUS <brentseres1@...> wrote:

FWIW,  here in Canada, I have opened up switching supplies and found spots on the circuit board where components were missing.  I've long suspected that these may have been filter components which were included in a device when submitted for testing and approval prior to sale, and left out for cost savings once approved  No proof...just suspicion..

73
Brent
VE3CUS 







--
Using Opera's mail client: http://www.opera.com/mail/


Re: SDR Console tray icon

Siegfried Jackstien
 

there is a settng in "tools/options ... under audio signal a checkbox "animate taskbar button" ... so not a real easter egg

dg9bfc sigi

Am 05.10.2021 um 23:58 schrieb Dale Elshoff WB8CJW:

Sorry, forgot to change the subject on my previous post. 😅


On 10/5/2021 5:24 PM, Dale Elshoff WB8CJW via groups.io wrote:
Just noticed the SDR Console icon in the tray is modulated by the program audio.  Nice Simon!
I feel like I just found an "Easter egg" even though it wasn't hidden, not a game and not Easter!

73, Dale WB8CJW



Re: System Error Message Help, Please . . . .

Siegfried Jackstien
 

see here

https://www.sdr-radio.com/download

scroll down to

C++ Redistributables

there it says

if the message is  ' Msvcp140.dll not found ' then the 2019 kit must be reinstalled.



  • 120 => 2013 Redistributable
  • 140 => 2019 Redistributable


To reinstall, select a kit from the SDR-Radio.com (V3) Tools entry in the Start Menu (see image).

 

  • Uninstall, then
  • Install.


⚠️ Never copy missing DLLs manually, always use the Redistributable kits.

.....

so uninstall then reinstall THE C++KIT !! ... not just the software but main thing is the c++ kit!! ... then you should not have that error anymore

greetz sigi dg9bfc


Am 06.10.2021 um 01:20 schrieb Dale Elshoff WB8CJW:

Hi Stephanie,

I searched my whole hard drive and I didn't find mfc140u.dll.  I am operating 64-bit Windows 10 and SDR Console 64-bit.  According to https://www.techidence.com/how-to-fix-mfc140u-dll-is-missing-on-windows-10-8-and-7/ "Like most DLL library errors, the MFC140u.dll error is related to the legacy library set of Visual Studio C++, a program that provides Windows with the tools necessary to run certain graphics programs."

You might try running sfc /scannow from an Administrative command prompt.  This will check that all system files are present.  Check online to see if any options should be selected.

That is about all I can think of until Simon is available.

Regards,
Dale WB8CJW


On 10/5/2021 6:52 PM, Stephanie Battaglino wrote:
Hello Simon, et. al.,

Up to now, I have been running the new v3.1 without issue for my Perseus, WinRadio Excalibur, and Elad FDM-S2.  Love the interface!  I am operating in a Win 10 environment.

Then today, strangely, I went to launch Console and I unexpectedly received this error message:

"The code execution cannot proceed because mfc140u.dll was not found.  Reinstalling the program may fix this problem."

I tried re-installing twice - after deleting whatever had preceded it and I still get the same system error message.  I looked in the directory and could not find the .dll in question.

Any assistance in fixing this issue would be greatly appreciated!  And apologies in advance if this has come up before in this group.

Appreciate the help and Thank You for all you do for DXers everywhere!

Warm Regards,

Stephanie Battaglino
Palm Desert, CA


Re: System Error Message Help, Please . . . .

Dale Elshoff WB8CJW <dale.elshoff@...>
 

Hi Stephanie,

I searched my whole hard drive and I didn't find mfc140u.dll.  I am operating 64-bit Windows 10 and SDR Console 64-bit.  According to https://www.techidence.com/how-to-fix-mfc140u-dll-is-missing-on-windows-10-8-and-7/ "Like most DLL library errors, the MFC140u.dll error is related to the legacy library set of Visual Studio C++, a program that provides Windows with the tools necessary to run certain graphics programs."

You might try running sfc /scannow from an Administrative command prompt.  This will check that all system files are present.  Check online to see if any options should be selected.

That is about all I can think of until Simon is available.

Regards,
Dale WB8CJW


On 10/5/2021 6:52 PM, Stephanie Battaglino wrote:

Hello Simon, et. al.,

Up to now, I have been running the new v3.1 without issue for my Perseus, WinRadio Excalibur, and Elad FDM-S2.  Love the interface!  I am operating in a Win 10 environment.

Then today, strangely, I went to launch Console and I unexpectedly received this error message:

"The code execution cannot proceed because mfc140u.dll was not found.  Reinstalling the program may fix this problem."

I tried re-installing twice - after deleting whatever had preceded it and I still get the same system error message.  I looked in the directory and could not find the .dll in question.

Any assistance in fixing this issue would be greatly appreciated!  And apologies in advance if this has come up before in this group.

Appreciate the help and Thank You for all you do for DXers everywhere!

Warm Regards,

Stephanie Battaglino
Palm Desert, CA


System Error Message Help, Please . . . .

Stephanie Battaglino
 

Hello Simon, et. al.,

Up to now, I have been running the new v3.1 without issue for my Perseus, WinRadio Excalibur, and Elad FDM-S2.  Love the interface!  I am operating in a Win 10 environment.

Then today, strangely, I went to launch Console and I unexpectedly received this error message:

"The code execution cannot proceed because mfc140u.dll was not found.  Reinstalling the program may fix this problem."

I tried re-installing twice - after deleting whatever had preceded it and I still get the same system error message.  I looked in the directory and could not find the .dll in question.

Any assistance in fixing this issue would be greatly appreciated!  And apologies in advance if this has come up before in this group.

Appreciate the help and Thank You for all you do for DXers everywhere!

Warm Regards,

Stephanie Battaglino
Palm Desert, CA


SDR Console tray icon

Dale Elshoff WB8CJW <dale.elshoff@...>
 

Sorry, forgot to change the subject on my previous post. 😅


On 10/5/2021 5:24 PM, Dale Elshoff WB8CJW via groups.io wrote:

Just noticed the SDR Console icon in the tray is modulated by the program audio.  Nice Simon!
I feel like I just found an "Easter egg" even though it wasn't hidden, not a game and not Easter!

73, Dale WB8CJW



Re: SDR-Radio download problem

Dale Elshoff WB8CJW <dale.elshoff@...>
 

Just noticed the SDR Console icon in the tray is modulated by the program audio.  Nice Simon!
I feel like I just found an "Easter egg" even though it wasn't hidden, not a game and not Easter!

73, Dale WB8CJW


Re: SDR-Radio download problem

Simon Brown
 

Jim,

 

Scroll down for the V3.1 links, click on a link…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Jim Simpson via groups.io
Sent: 05 October 2021 20:53
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] SDR-Radio download problem

 

As of the time I'm posting this, I can't seem to download the current version (3.1) from the SDR-Radio.com website.  (Oct 5, 1500 US east coast time)  Is the site down?  Do I need to make a donation first?

Thanks in advance.

Jim


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


SDR-Radio download problem

Jim Simpson
 

As of the time I'm posting this, I can't seem to download the current version (3.1) from the SDR-Radio.com website.  (Oct 5, 1500 US east coast time)  Is the site down?  Do I need to make a donation first?

Thanks in advance.

Jim


Re: Band Plan

Dennis Matzen
 

Thanks Simon. If you were in the group of coders in the comic you could raise your hand to both questions....
--
Dennis
KA6FUB


Re: Arinst SDR Dreamkit V1D

Scott/KC1UA
 

I have mine in hand and as Mark states above, I think I might be hesitant to connect it to an external antenna with all of the strong RF signals floating around my area. That said the receiver is very sensitive at VHF and above. I was quite surprised at the number of signals I was seeing/hearing with just a telescoping whip attached. My intent was for portable use only and I expect it will remain that way. No "magic smoke emissions" here either!
--
Scott - KC1UA
Marstons Mills, Cape Cod, MA USA


Re: 2365 Beta won't start the RSPduo. This worked fine in version 2346 #bug

Frank
 

On Mon, Oct 4, 2021 at 12:42 AM, Roger Need wrote:
Here is a Facebook post with a solution to the 10 MHz. issue.
Hi Roger,

nothing to do here...,

I tried to play and modify with the buffer options, both 'default' or x2 x4 and with and without "maximum (default) ....
 
=> at 10@ MHz it always stops, RSP2 at @10MHz does not work: as always only in the @0.5/8Mhz BW range
 
Surely better to wait for the changes Simon has made for the next beta RC or GA kit ...

For now I use at most @8Mhz ...
Thanks

73


Re: Software

Tom Crosbie G6PZZ
 

Love it! I’m adapting that for my stroke support group😊

 

Tom G6PZZ

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown
Sent: 05 October 2021 07:57
To: sdr-radio@groups.io
Subject: [SDR-Radio] Software

 

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Can someone please guide me on how to find a root cause: SDR Console will not lauch/start any of my SDRPlay units

Gisle Vanem
 

On Mon, Oct 4, 2021 at 07:37 AM, Simon Brown wrote:

, I only see very occasional restarts of the service.

When using my RSP1A with the awesome SDR++, I often see SDRplay API Service v3.08 restarts (in my Eventlog).
I've now set it to Auto-restart after 1 minute. Hope that will fix this issue for me.


Software

Simon Brown
 

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Band Plan

Simon Brown
 

Hah,

 

Bug – will fix today, I plan on updating the 3.1 Beta tomorrow.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Dennis Matzen
Sent: 04 October 2021 21:48
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Band Plan

 

Simon, what is the correct way to create a custom band plan? I have used the "Editor" feature in the ribbon (View, Band Plan, Editor) twice now to add the US HF HAM sub-bands just to find it revert back to the default.  Seems that when I restart it goes back to the default. Where is this data stored, I cannot seem to find it.

Thanks...
--
Dennis
KA6FUB


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Can someone please guide me on how to find a root cause: SDR Console will not lauch/start any of my SDRPlay units

Dennis Matzen
 

What got it working? 
--
Dennis
KA6FUB


Re: Can someone please guide me on how to find a root cause: SDR Console will not lauch/start any of my SDRPlay units

Mark, WD4ELG
 

Thanks.  That got it working!

4541 - 4560 of 68711