Date   

Re: Keeping Tuned Freq in Center

Siegfried Jackstien
 

i am guessing rx matrix could do the job very well

each of your receivers represent a sub band (in your example the cw portion and the ssb dx window) ... your main receiver couod be much wider (say you have a good sdr with 10 megs bw you can receive the complete 70cm band)

now yoi see asignal on rx 1 (a cw signal comes up) ... in the rx window press select ... your receiver window is not also in the if window (rx dsp box) ... in rx 1 and 2 you can use a bit wider view (see my screenshots) and in the if window you do the finetune

in my example i only used one receiver in full screewidth to show you the different zoom settings ... but you can use 2 or 3 receivers (subbands)

if you do not want the subbands to be retuned ... why not use a third receiver?!? (maybe thats your solution?!?)

use rx 1 and 2 and subbands ... main spectrum shows full bw that your sdr gives ... and rx3 is used as "working" receiver (can be tuned to any frequency without change the sub receivers 1+2 that you only use to "view" but not for receive)

just an idea

dg9bfc sigi

Am 22.09.2021 um 22:41 schrieb sm6fhz:

OK Simon.
I will try to explain.
I have the Rx-matrix set up for a few sub-bands e.g. 70 cm CW (e.g. 432.020 to 432.070), 70 cm SSB (e.g. 432.150 to 432.250), 70 cm beacons etc.
I monitor these selected frequency ranges by these receivers in the Rx-matrix in order to see if any activity arises. E.G. in an contest situation.
If I see someone coming on I would like to move the Rx-passband to this frequency to listen, but still have the same monitoring (visually in spectrum and waterfall) as before.
I.E. locking the frequency band even if I move the Rx-frequency within this band. E.G. a check box for "lock Rx-matrix) so I still watch the same frequency range as set even if i scroll around listening to different stations.
I know this is the way the main window works, but there you do not get enough frequency resolution to separate different CW stations in the CW part of the band when looking at 432.000 to 432.500. That is why I use the Rx-matrix to display sub-bands of interest.
I have searched the "Options" for this but not found this possibility.
I hope I was able to explain my desire in an comprehensible way.
It would be very handy with such an option.
73 / Ingolf, SM6FHZ


Re: 2365 Beta won't start the RSPduo. This worked fine in version 2346 #bug

Robin Francis
 

I have api 3.08 and RSPduo working fine at 10 MHZ. I don’t have Uno installed and api starts fine. This with 2365 Beta. Originally I couldn’t run 10 MHZ at all until I made sure internal USB hub only had RSP connected.

Robin

 

Sent from Mail for Windows

 


Re: 2365 Beta won't start the RSPduo. This worked fine in version 2346 #bug

Dennis Matzen
 

Pulled out the RSPduo and tested it. Same result as the RSP2pro, 8Mhz OK, 10Mhz nothing. Log files attached.

I have API 3.07 installed on system.

System is a Dell XPS8700, i7-4770 CPU, 16GB memory, NVIDIA GeForce GT635

USB connection is to PCI 3.0 adapter, w/connection to power supply, dedicated to SDR 
--
Dennis
KA6FUB


Re: Keeping Tuned Freq in Center

sm6fhz
 

OK Simon.
I will try to explain.
I have the Rx-matrix set up for a few sub-bands e.g. 70 cm CW (e.g. 432.020 to 432.070), 70 cm SSB (e.g. 432.150 to 432.250), 70 cm beacons etc.
I monitor these selected frequency ranges by these receivers in the Rx-matrix in order to see if any activity arises. E.G. in an contest situation.
If I see someone coming on I would like to move the Rx-passband to this frequency to listen, but still have the same monitoring (visually in spectrum and waterfall) as before.
I.E. locking the frequency band even if I move the Rx-frequency within this band. E.G. a check box for "lock Rx-matrix) so I still watch the same frequency range as set even if i scroll around listening to different stations.
I know this is the way the main window works, but there you do not get enough frequency resolution to separate different CW stations in the CW part of the band when looking at 432.000 to 432.500. That is why I use the Rx-matrix to display sub-bands of interest.
I have searched the "Options" for this but not found this possibility.
I hope I was able to explain my desire in an comprehensible way.
It would be very handy with such an option.
73 / Ingolf, SM6FHZ


Re: Keeping Tuned Freq in Center

Mag loop Simon
 

Hi Simon

GOOD NEWS House has been valued..

Much more than expected!! Heading Saltash!! ( area) soon we hope!!

See you soon Other Simon

Sorry for post hijack..( ps Cornwall amp is made and working well!)

Seriously pls look out for properties circa 400k..promise wont come and visit..ps will take bribes to move to Norfolk..


Re: Keeping Tuned Freq in Center

Simon Brown
 

My mistake.

 

You’ll have to explain exactly what you want, it may be possible…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of sm6fhz
Sent: 22 September 2021 20:23
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Keeping Tuned Freq in Center

 

Hi Simon.
If your answer was for me and my question, it does not solve my question regarding the RX-matrix and locking one particular Rx-displayed frequency range and move your Rx withing that range keeping the very same frequency range displayed.
I was not sure if your answer was directed to me or to another question. Sorry.
73 / Ingolf, SM6FHZ


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Keeping Tuned Freq in Center

sm6fhz
 

Hi Simon.
If your answer was for me and my question, it does not solve my question regarding the RX-matrix and locking one particular Rx-displayed frequency range and move your Rx withing that range keeping the very same frequency range displayed.
I was not sure if your answer was directed to me or to another question. Sorry.
73 / Ingolf, SM6FHZ


Re: RSPdx will not start in SDRC 3.1 Build 2365 #sdruno

Simon Brown
 

Also,

 

I can start any RSP receiver without every using SDRuno, in fact I’ve never installed SDRuno, only the API downloads. Maybe SDRuno starts the service? I can always do this myself.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of milairuk via groups.io
Sent: 22 September 2021 19:56
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] RSPdx will not start in SDRC 3.1 Build 2365 #sdruno

 

I've just upgraded two PC's with SDRuno version 1.41 and now SDRC doesn't want to start my RSPDx unless I first start SDRuno. It appears that the problem is that the old API v3.07 loads at the startup of W10, whereas the latest API v3.08 doesn't. It can also be started in Services instead of running SDRuno first.
On one PC I have re-installed SDRuno 1.40 and then have no problems as the API is v3.07. Cannot work out why the new API v3.08 doesn't start even though it is set to Automatic in services ? Any ideas ?

Regards

John


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: RSPdx will not start in SDRC 3.1 Build 2365 #sdruno

Simon Brown
 

Hi,

 

I noticed that 3.08 was not set to automatic startup. You’ll have to bring this up with the SDRplay folks, it’s their API.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of milairuk via groups.io
Sent: 22 September 2021 19:56
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] RSPdx will not start in SDRC 3.1 Build 2365 #sdruno

 

I've just upgraded two PC's with SDRuno version 1.41 and now SDRC doesn't want to start my RSPDx unless I first start SDRuno. It appears that the problem is that the old API v3.07 loads at the startup of W10, whereas the latest API v3.08 doesn't. It can also be started in Services instead of running SDRuno first.
On one PC I have re-installed SDRuno 1.40 and then have no problems as the API is v3.07. Cannot work out why the new API v3.08 doesn't start even though it is set to Automatic in services ? Any ideas ?

Regards

John


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Keeping Tuned Freq in Center

Simon Brown
 

Like this – see attachment.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of sm6fhz
Sent: 22 September 2021 20:08
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Keeping Tuned Freq in Center

 

I am sorry Joanne, but I can not find the setting you are referring to under "Tools", "Options".
Can you please post a screenshot to ease the finding of this particular setting enabling one singe receiver in the Rx-matrix to keep it's displayed frequency range even if I change the Rx-frequency within the displayed frequency range.
73 / Ingolf, SM6FHZ


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Keeping Tuned Freq in Center

sm6fhz
 

I am sorry Joanne, but I can not find the setting you are referring to under "Tools", "Options".
Can you please post a screenshot to ease the finding of this particular setting enabling one singe receiver in the Rx-matrix to keep it's displayed frequency range even if I change the Rx-frequency within the displayed frequency range.
73 / Ingolf, SM6FHZ


RSPdx will not start in SDRC 3.1 Build 2365 #sdruno

milairuk
 

I've just upgraded two PC's with SDRuno version 1.41 and now SDRC doesn't want to start my RSPDx unless I first start SDRuno. It appears that the problem is that the old API v3.07 loads at the startup of W10, whereas the latest API v3.08 doesn't. It can also be started in Services instead of running SDRuno first.
On one PC I have re-installed SDRuno 1.40 and then have no problems as the API is v3.07. Cannot work out why the new API v3.08 doesn't start even though it is set to Automatic in services ? Any ideas ?

Regards

John


Re: Problems installing RTLSDR++

eyilmaz
 

Hello,

Had the same "problem". Take about the subfolders. They must be there !

73


Re: 2365 Beta won't start the RSPduo. This worked fine in version 2346 #bug

Frank
 

On Wed, Sep 22, 2021 at 08:32 AM, agene wrote:
Works fine with both my RSPdx and RSP 2
Tested also with RSP2 @10MHz bandwidth?

I don't know what to think, but it's not caused by the PC or USB power supply which is still similar to your PC and with sdruno 4.1 it works perfectly.
The same problem is confirmed by other users.

Maybe for the new SDRplay API 3.08?

Luckily I don't use @ 10MHz bw ... ;-)

73


Re: Keeping Tuned Freq in Center

Siegfried Jackstien
 

open receiver pane ... can be set to any position

there you see the signal centered (it is similar to if window but can be docked anywhere and set to fulle screen width)

and as an example i docked it to top of screen and showing min and max zoom ratio


Am 22.09.2021 um 14:02 schrieb Kriss Kliegle KA1GJU:

Open the DSP Panel (where you have the frequency display, filters, modes, etc) and open the IF Display. Then put mouse cursor inside the small waterfall and use the scroll knob on mouse. Active frequency will stay incenter, although you are limited in width of view.



73 Kriss KA1GJU


Re: Reverse Mouse Tuning Wheel

Simon Brown
 

Joe,

 

If you are not in the test team then you must join, I’ve just published a kit for you.

 

SDR-Radio-TestTeam@groups.io | Home

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of joe_word via groups.io
Sent: 21 September 2021 23:16
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Reverse Mouse Tuning Wheel

 

Simon,

That sounds good to me.

Thanks,

Joe  N9VX


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 2365 Beta won't start the RSPduo. This worked fine in version 2346 #bug

jdow
 

I hear tell that some laptops do not supply full power to USB ports as a  means of increasing battery life. It's a BIOS setting. A fully powered hub should be able to turn the trick, too, I believe.

{^_^}

On 20210922 01:32:14, agene wrote:

Works fine with both my RSPdx and RSP 2

Suspect this may be a matter of not enough power in some PCs, I am using an Intel i7 11700K @ 3.600GHz and runs both versions without problem.

Mike


On 22/09/2021 6:22 pm, jdow wrote:
USB sufficiency perhaps? Power supply insufficiency? Just wondering.

{o.o}

On 20210922 01:16:14, Frank wrote:
As Dale confirms, his RSPdx works too, so it seems like a strange problem with some drivers on the SDRplay RSP2 version?

Have others user with RSP2 tried, in addition to those already announced?



Re: Keeping Tuned Freq in Center

Kriss Kliegle KA1GJU
 

Open the DSP Panel (where you have the frequency display, filters, modes, etc) and open the IF Display. Then put mouse cursor inside the small waterfall and use the scroll knob on mouse. Active frequency will stay incenter, although you are limited in width of view.



73 Kriss KA1GJU


Re: Keeping Tuned Freq in Center

Jim Smith G0OFE
 

There isn't, in the main display.

Best to use the Receiver Pane, which does keep the tuned frequency in the middle.


================================
Need help with SDR Console? If you have a problem:
Go to https://www.sdr-radio.com/support
Please follow instructions in that link.
===================================
Jim, Bournemouth, Dorset. IO90BR.
Elad FDM-S2, Airspy HF+, SDRPlay and Funcube Dongle SDR Recievers
8-element OP-DES for Band 2, 8-element LFA for 2m, 3-element LFA for 6m, 20m Windom for HF,. Wellbrook 1530 Loop for LF


On 21/09/2021 23:03, joe_word via groups.io wrote:
I do not see any option to keep the Tuned Frequency in the middle of the panadpter. Could you be more specific.

Joe  N9VX


Re: 2365 Beta won't start the RSPduo. This worked fine in version 2346 #bug

agene
 

Works fine with both my RSPdx and RSP 2

Suspect this may be a matter of not enough power in some PCs, I am using an Intel i7 11700K @ 3.600GHz and runs both versions without problem.

Mike


On 22/09/2021 6:22 pm, jdow wrote:
USB sufficiency perhaps? Power supply insufficiency? Just wondering.

{o.o}

On 20210922 01:16:14, Frank wrote:
As Dale confirms, his RSPdx works too, so it seems like a strange problem with some drivers on the SDRplay RSP2 version?

Have others user with RSP2 tried, in addition to those already announced?

3361 - 3380 of 67334