main@SDR-Radio.groups.io

Home Messages Hashtags Subgroups

Between

and

Re: Audio Selection Gedas #63966 Excellent thank you everyone. Having lots of fun with the SDR this afternoon. BTW, just made a 525 km 10 GHz rain-scatter CW contact. Day doesn't get any better :-) Gedas, W8BYA EN70JT Gallery at http://w8bya.com (under repair) Light travels faster than sound.... This is why some people appear bright until you hear them speak. On 8/27/2021 2:37 PM, john rader wrote: toggle quoted messageShow quoted text Yes, start a second instance of vac and select the virtual line you already started as the wave in, then select the speakers you use as the wave out. I use this all the time to hear what is selected in sdr console. When you only want to use RSPdx, go to the task bar, hidden icons onthe right side of task bar, open it and select the icon for vac, close it out. Only the RSPdx should be heard then. On 8/27/2021 2:15 PM, Dale Elshoff WB8CJW wrote: Sorry. Forgot the attachment.🙁 On 8/27/2021 1:23 PM, Gedas wrote: Using a RSPdx with SDRC V3.1 and Laptop with W/10. All works aok but then I had the bright idea to install VB Audio to get some VAC going so I could run WSJT etc. That went smooth and was able to make many FB decodes overnight. 1. I wish there was a way to be able to hear what the RSPdx is tuned WHILE it's audio is being ported over to WSJT via the VAC. Is there an easy way of monitoring what the VAC is transferring? 2. The next part has me scratching my head......I am done with WSJT and just want to do some listening on this W10 laptop with the RSPdx. When I go to SDRC/OPTIONS/AUDIO/PLAYBACK/DEVICES I can see my Realtek PC speakers on one line and the VAC on the 2nd line. I select the Realtek PC speakers, hit OK then re-start SDRC hoping to be able to hear the receiver via the speakers but get zip. Is there an easy way to switch from one to the other? I thought the OPTIONS tab is where I make this selection but apparently not. Thanks Gedas, W8BYA EN70JT Gallery at http://w8bya.com (under repair) Light travels faster than sound.... This is why some people appear bright until you hear them speak.
More All Messages By This Member
Re: Audio Selection john rader #63965 Yes, start a second instance of vac and select the virtual line you already started as the wave in, then select the speakers you use as the wave out. I use this all the time to hear what is selected in sdr console. When you only want to use RSPdx, go to the task bar, hidden icons onthe right side of task bar, open it and select the icon for vac, close it out. Only the RSPdx should be heard then. toggle quoted messageShow quoted text On 8/27/2021 2:15 PM, Dale Elshoff WB8CJW wrote: Sorry. Forgot the attachment.🙁 On 8/27/2021 1:23 PM, Gedas wrote: Using a RSPdx with SDRC V3.1 and Laptop with W/10. All works aok but then I had the bright idea to install VB Audio to get some VAC going so I could run WSJT etc. That went smooth and was able to make many FB decodes overnight. 1. I wish there was a way to be able to hear what the RSPdx is tuned WHILE it's audio is being ported over to WSJT via the VAC. Is there an easy way of monitoring what the VAC is transferring? 2. The next part has me scratching my head......I am done with WSJT and just want to do some listening on this W10 laptop with the RSPdx. When I go to SDRC/OPTIONS/AUDIO/PLAYBACK/DEVICES I can see my Realtek PC speakers on one line and the VAC on the 2nd line. I select the Realtek PC speakers, hit OK then re-start SDRC hoping to be able to hear the receiver via the speakers but get zip. Is there an easy way to switch from one to the other? I thought the OPTIONS tab is where I make this selection but apparently not. Thanks Gedas, W8BYA EN70JT Gallery at http://w8bya.com (under repair) Light travels faster than sound.... This is why some people appear bright until you hear them speak.
More All Messages By This Member
Re: Audio Selection Gedas #63964 Thanks Barry. Good to know but I will never purchase from him again after I lost a hard drive and my key and he was 100% unwilling to help out. And a snotty attitude too-boot. 73 Gedas, W8BYA EN70JT Gallery at http://w8bya.com (under repair) Light travels faster than sound.... This is why some people appear bright until you hear them speak. On 8/27/2021 2:32 PM, Barry Jablonski wrote: toggle quoted messageShow quoted text Another option, if you are using VAC, is to use Audio Repeater: https://vac.muzychenko.net/en/repeater.htm Barry WB2ZXJ
More All Messages By This Member
Re: Audio Selection Barry Jablonski #63963 Another option, if you are using VAC, is to use Audio Repeater: https://vac.muzychenko.net/en/repeater.htm Barry WB2ZXJ
More All Messages By This Member
Re: Audio Selection Gedas #63962 Hiya Dale.....awesome thank you. Will try it right out. 73 Gedas, W8BYA EN70JT Gallery at http://w8bya.com (under repair) Light travels faster than sound.... This is why some people appear bright until you hear them speak. On 8/27/2021 2:13 PM, Dale Elshoff WB8CJW wrote: toggle quoted messageShow quoted text Hi Gedas. Windows 10 - if you right-click the speaker icon at the bottom and select Sounds, then click the Recording tab you will see the VAC output properties. Double-click to open, then click on the Listen tab. Here you click the box to enable Listen to this device. Now you will hear the audio that is coming in the VAC and you can mute the system speakers if you don't want to hear the receiver audio but the receiver audio will still be passed to WSJT. Also you can set the appropriate audio level from the Levels tab to get the best decoding. 73, Dale WB8CJW EN80ld On 8/27/2021 1:23 PM, Gedas wrote: Using a RSPdx with SDRC V3.1 and Laptop with W/10. All works aok but then I had the bright idea to install VB Audio to get some VAC going so I could run WSJT etc. That went smooth and was able to make many FB decodes overnight. 1. I wish there was a way to be able to hear what the RSPdx is tuned WHILE it's audio is being ported over to WSJT via the VAC. Is there an easy way of monitoring what the VAC is transferring? 2. The next part has me scratching my head......I am done with WSJT and just want to do some listening on this W10 laptop with the RSPdx. When I go to SDRC/OPTIONS/AUDIO/PLAYBACK/DEVICES I can see my Realtek PC speakers on one line and the VAC on the 2nd line. I select the Realtek PC speakers, hit OK then re-start SDRC hoping to be able to hear the receiver via the speakers but get zip. Is there an easy way to switch from one to the other? I thought the OPTIONS tab is where I make this selection but apparently not. Thanks Gedas, W8BYA EN70JT Gallery at http://w8bya.com (under repair) Light travels faster than sound.... This is why some people appear bright until you hear them speak.
More All Messages By This Member
Re: Audio Selection Dale Elshoff WB8CJW #63961 Sorry. Forgot the attachment.🙁 toggle quoted messageShow quoted text On 8/27/2021 1:23 PM, Gedas wrote: Using a RSPdx with SDRC V3.1 and Laptop with W/10. All works aok but then I had the bright idea to install VB Audio to get some VAC going so I could run WSJT etc. That went smooth and was able to make many FB decodes overnight. 1. I wish there was a way to be able to hear what the RSPdx is tuned WHILE it's audio is being ported over to WSJT via the VAC. Is there an easy way of monitoring what the VAC is transferring? 2. The next part has me scratching my head......I am done with WSJT and just want to do some listening on this W10 laptop with the RSPdx. When I go to SDRC/OPTIONS/AUDIO/PLAYBACK/DEVICES I can see my Realtek PC speakers on one line and the VAC on the 2nd line. I select the Realtek PC speakers, hit OK then re-start SDRC hoping to be able to hear the receiver via the speakers but get zip. Is there an easy way to switch from one to the other? I thought the OPTIONS tab is where I make this selection but apparently not. Thanks Gedas, W8BYA EN70JT Gallery at http://w8bya.com (under repair) Light travels faster than sound.... This is why some people appear bright until you hear them speak.
More All Messages By This Member
Re: Audio Selection Dale Elshoff WB8CJW #63960 Hi Gedas. Windows 10 - if you right-click the speaker icon at the bottom and select Sounds, then click the Recording tab you will see the VAC output properties. Double-click to open, then click on the Listen tab. Here you click the box to enable Listen to this device. Now you will hear the audio that is coming in the VAC and you can mute the system speakers if you don't want to hear the receiver audio but the receiver audio will still be passed to WSJT. Also you can set the appropriate audio level from the Levels tab to get the best decoding. 73, Dale WB8CJW EN80ld toggle quoted messageShow quoted text On 8/27/2021 1:23 PM, Gedas wrote: Using a RSPdx with SDRC V3.1 and Laptop with W/10. All works aok but then I had the bright idea to install VB Audio to get some VAC going so I could run WSJT etc. That went smooth and was able to make many FB decodes overnight. 1. I wish there was a way to be able to hear what the RSPdx is tuned WHILE it's audio is being ported over to WSJT via the VAC. Is there an easy way of monitoring what the VAC is transferring? 2. The next part has me scratching my head......I am done with WSJT and just want to do some listening on this W10 laptop with the RSPdx. When I go to SDRC/OPTIONS/AUDIO/PLAYBACK/DEVICES I can see my Realtek PC speakers on one line and the VAC on the 2nd line. I select the Realtek PC speakers, hit OK then re-start SDRC hoping to be able to hear the receiver via the speakers but get zip. Is there an easy way to switch from one to the other? I thought the OPTIONS tab is where I make this selection but apparently not. Thanks Gedas, W8BYA EN70JT Gallery at http://w8bya.com (under repair) Light travels faster than sound.... This is why some people appear bright until you hear them speak.
More All Messages By This Member
Re: Audio Selection Gedas #63959 Like Aunt Audre always said......life's a bitch when your stupid ! Thanks Simon, worked like a charm. Have a good weekend. 73 Gedas, W8BYA EN70JT Gallery at http://w8bya.com (under repair) Light travels faster than sound.... This is why some people appear bright until you hear them speak. On 8/27/2021 1:54 PM, Simon Brown wrote: toggle quoted messageShow quoted text Hi, Switch audio device with the dropdown just below the frequency. You can’t monitor a VAC at the moment, additional audio routing is planned. Simon Brown, G4ELI https://www.sdr-radio.com -----Original Message----- From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Gedas Sent: 27 August 2021 18:23 To: main@SDR-Radio.groups.io Subject: [SDR-Radio] Audio Selection Using a RSPdx with SDRC V3.1 and Laptop with W/10. All works aok but then I had the bright idea to install VB Audio to get some VAC going so I could run WSJT etc. That went smooth and was able to make many FB decodes overnight. 1. I wish there was a way to be able to hear what the RSPdx is tuned WHILE it's audio is being ported over to WSJT via the VAC. Is there an easy way of monitoring what the VAC is transferring? 2. The next part has me scratching my head......I am done with WSJT and just want to do some listening on this W10 laptop with the RSPdx. When I go to SDRC/OPTIONS/AUDIO/PLAYBACK/DEVICES I can see my Realtek PC speakers on one line and the VAC on the 2nd line. I select the Realtek PC speakers, hit OK then re-start SDRC hoping to be able to hear the receiver via the speakers but get zip. Is there an easy way to switch from one to the other? I thought the OPTIONS tab is where I make this selection but apparently not. Thanks Gedas, W8BYA EN70JT Gallery at http://w8bya.com (under repair) Light travels faster than sound.... This is why some people appear bright until you hear them speak. -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
More All Messages By This Member
Re: Speech Processor Simon Brown #63958 Mike, The speech processor is quite good, it’s a compandor followed by a limiter. Let’s see a screenshot of the transmit options while you’re talking, the Spectrum shows the range and relative levels. A few tweaks and you’ll be good to go. Simon Brown, G4ELI https://www.sdr-radio.com toggle quoted messageShow quoted text From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of MikeC Sent: 27 August 2021 18:46 To: main@sdr-radio.groups.io Subject: [SDR-Radio] Speech Processor Sorry, another question... I was wondering what sort of processing the processor function on the transmit audio is. It seems to improve the average to peak power ratio but only by a relatively small amount. By the comment that it makes the audio harsh I rather assume it implements a similar function to rf clipping. I can’t find any description for it in the audio help. Am I right that the audio alc is syllabic in time constant? I have had a couple of reports that the audio is a bit thin which set me off on this. Playing with the audio filtering and the equaliser doesn’t quite get me what I want. The headset boom mic is not the most expensive I have to say. Mike Sent from Mail for Windows -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
More All Messages By This Member
Re: Speech Processor Siegfried Jackstien #63957 Near any mic should give a goid audio... Equalizer plus processing... Maybe switch on the mic boost... Already cranked up mic audio in windows?? If you look in tx tab where the vox slider is.. While talking in the mic (no need to tx!).. How high does the grey bar come up?? (shows raw audio strength that goes IN the console).... Processing with 30 to 40 should give enough boost... Thin audio?? Boost low tones a bit.. Greetz sigi dg9bfc Am 27.08.2021 19:46 schrieb MikeC <mike.christieson@...>: toggle quoted messageShow quoted text Sorry, another question... I was wondering what sort of processing the processor function on the transmit audio is. It seems to improve the average to peak power ratio but only by a relatively small amount. By the comment that it makes the audio harsh I rather assume it implements a similar function to rf clipping. I can’t find any description for it in the audio help. Am I right that the audio alc is syllabic in time constant? I have had a couple of reports that the audio is a bit thin which set me off on this. Playing with the audio filtering and the equaliser doesn’t quite get me what I want. The headset boom mic is not the most expensive I have to say. Mike Sent from Mail for Windows
More All Messages By This Member
Re: Latency with RSPduo #rspduo (More) #rspduo Simon Brown #63956 Hi, The change wasn’t needed, problem was elsewhere. New beta next week I think. Simon Brown, G4ELI https://www.sdr-radio.com toggle quoted messageShow quoted text From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of n6vl via groups.io Sent: 27 August 2021 18:24 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Latency with RSPduo #rspduo (More) Where do we this latest change? de Steve N6VL -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
More All Messages By This Member
Re: Audio Selection Simon Brown #63955 Hi, Switch audio device with the dropdown just below the frequency. You can’t monitor a VAC at the moment, additional audio routing is planned. Simon Brown, G4ELI https://www.sdr-radio.com toggle quoted messageShow quoted text -----Original Message----- From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Gedas Sent: 27 August 2021 18:23 To: main@SDR-Radio.groups.io Subject: [SDR-Radio] Audio Selection Using a RSPdx with SDRC V3.1 and Laptop with W/10. All works aok but then I had the bright idea to install VB Audio to get some VAC going so I could run WSJT etc. That went smooth and was able to make many FB decodes overnight. 1. I wish there was a way to be able to hear what the RSPdx is tuned WHILE it's audio is being ported over to WSJT via the VAC. Is there an easy way of monitoring what the VAC is transferring? 2. The next part has me scratching my head......I am done with WSJT and just want to do some listening on this W10 laptop with the RSPdx. When I go to SDRC/OPTIONS/AUDIO/PLAYBACK/DEVICES I can see my Realtek PC speakers on one line and the VAC on the 2nd line. I select the Realtek PC speakers, hit OK then re-start SDRC hoping to be able to hear the receiver via the speakers but get zip. Is there an easy way to switch from one to the other? I thought the OPTIONS tab is where I make this selection but apparently not. Thanks Gedas, W8BYA EN70JT Gallery at http://w8bya.com (under repair) Light travels faster than sound.... This is why some people appear bright until you hear them speak. -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
More All Messages By This Member
Speech Processor MikeC #63954 Sorry, another question... I was wondering what sort of processing the processor function on the transmit audio is. It seems to improve the average to peak power ratio but only by a relatively small amount. By the comment that it makes the audio harsh I rather assume it implements a similar function to rf clipping. I can’t find any description for it in the audio help. Am I right that the audio alc is syllabic in time constant? I have had a couple of reports that the audio is a bit thin which set me off on this. Playing with the audio filtering and the equaliser doesn’t quite get me what I want. The headset boom mic is not the most expensive I have to say. Mike Sent from Mail for Windows
More All Messages By This Member
Re: Latency with RSPduo #rspduo (More) #rspduo n6vl #63953 Where do we this latest change? de Steve N6VL
More All Messages By This Member
Audio Selection Gedas #63952 Using a RSPdx with SDRC V3.1 and Laptop with W/10. All works aok but then I had the bright idea to install VB Audio to get some VAC going so I could run WSJT etc. That went smooth and was able to make many FB decodes overnight. 1. I wish there was a way to be able to hear what the RSPdx is tuned WHILE it's audio is being ported over to WSJT via the VAC. Is there an easy way of monitoring what the VAC is transferring? 2. The next part has me scratching my head......I am done with WSJT and just want to do some listening on this W10 laptop with the RSPdx. When I go to SDRC/OPTIONS/AUDIO/PLAYBACK/DEVICES I can see my Realtek PC speakers on one line and the VAC on the 2nd line. I select the Realtek PC speakers, hit OK then re-start SDRC hoping to be able to hear the receiver via the speakers but get zip. Is there an easy way to switch from one to the other? I thought the OPTIONS tab is where I make this selection but apparently not. Thanks Gedas, W8BYA EN70JT Gallery at http://w8bya.com (under repair) Light travels faster than sound.... This is why some people appear bright until you hear them speak.
More All Messages By This Member
Re: SDR server synchronize with collocated Kenwood radio? Simon Brown #63951 But, You must have control of the remote TS-590 in the shack (local), what software are you using for this? Simon Brown, G4ELI https://www.sdr-radio.com toggle quoted messageShow quoted text -----Original Message----- From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown Sent: 27 August 2021 17:11 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] SDR server syncroniz with colocated Kenwood radio? I don't think so... Simon Brown, G4ELI https://www.sdr-radio.com -----Original Message----- From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Gordon LaPoint Sent: 27 August 2021 17:05 To: main@sdr-radio.groups.io Subject: [SDR-Radio] SDR server syncroniz with colocated Kenwood radio? I run a remote setup with a Kenwood TS-590sg and an RSP1a. Can the V3 server be run and synchronized with the Kenwood? I can synchronize the V3 client with the kenwood, but want to access the server over the internet while using the Kenwood via RCForb. Right now to see the SDR display I have to open a remote desktop to the server computer, I would like to eliminate that step. Thanks Gordon - N1MGO -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
More All Messages By This Member
Re: SDR server syncroniz with colocated Kenwood radio? Simon Brown #63950 I don't think so... Simon Brown, G4ELI https://www.sdr-radio.com toggle quoted messageShow quoted text -----Original Message----- From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Gordon LaPoint Sent: 27 August 2021 17:05 To: main@sdr-radio.groups.io Subject: [SDR-Radio] SDR server syncroniz with colocated Kenwood radio? I run a remote setup with a Kenwood TS-590sg and an RSP1a. Can the V3 server be run and synchronized with the Kenwood? I can synchronize the V3 client with the kenwood, but want to access the server over the internet while using the Kenwood via RCForb. Right now to see the SDR display I have to open a remote desktop to the server computer, I would like to eliminate that step. Thanks Gordon - N1MGO -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
More All Messages By This Member
SDR server syncroniz with colocated Kenwood radio? Gordon LaPoint #63949 I run a remote setup with a Kenwood TS-590sg and an RSP1a. Can the V3 server be run and synchronized with the Kenwood? I can synchronize the V3 client with the kenwood, but want to access the server over the internet while using the Kenwood via RCForb. Right now to see the SDR display I have to open a remote desktop to the server computer, I would like to eliminate that step. Thanks Gordon - N1MGO
More All Messages By This Member
Re: Tuning error and PC freeze Simon Brown #63948 Frank, I’ll look at this soon, it’s now the weekend! Simon Brown, G4ELI https://www.sdr-radio.com toggle quoted messageShow quoted text From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Frank Sent: 27 August 2021 15:20 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Tuning error and PC freeze [Edited Message Follows] NEW UPDATE: HI Simon, I just ran a quick check on another "virgin" PC. ProBook 6560B / SSD / I5 1. installed new SdrConsole 3.1 2. installed an SDRrtl USB stick 3. start SDRconsole 4. everything works perfectly 5. I select 446MHz and open 8rx 6. I open the 8 RXs audios 7. I close all the Rx and +add single rx 8. I go to 144MHz and make a CLICK same problem, the RX of the click does not appear and changes frequency to the click to the right or to the left of the WF going to 446 or 144. Same problem even on a new PC ... with another SDR, at this point I think it's a possible SDRconsole problem? Here too, if before closing the 8 RXs I move to 144 and click, then I close the RXs and open only one, everything works. Exactly as explained in the previous message. I don't understand where the same problem lies on the other PC as well. 73 -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
More All Messages By This Member
Re: rspduo waving signal with SDR console v3 and SDRUno 1.41 b2 Simon Brown #63947 Hi, If you still have problems make another video, please show the Ribbon Bar, Home pane as this contains the interesting settings. Simon Brown, G4ELI https://www.sdr-radio.com toggle quoted messageShow quoted text From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of IC8FAX Sent: 27 August 2021 15:51 To: main@sdr-radio.groups.io Subject: Re: [SDR-Radio] rspduo waving signal with SDR console v3 and SDRUno 1.41 b2 Hi Simon, many thanks for helping me. I have done some configurations as you have suggested. Now it's going better, but the trouble seems not to be totally resolved. Thanks for all. Cheers, Jacob Il giorno gio 26 ago 2021 alle ore 20:59 Simon Brown <simon@...> ha scritto: Yes, Auto-mute is flashing on the status bar. Simon Brown, G4ELI https://www.sdr-radio.com From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown Sent: 26 August 2021 19:45 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] rspduo waving signal with SDR console v3 and SDRUno 1.41 b2 Hi, I think this is muting! Ribbon Bar, Home, Wideband DSP, Auto-Mute. Simon Brown, G4ELI https://www.sdr-radio.com From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of IC8FAX Sent: 26 August 2021 19:13 To: main@sdr-radio.groups.io Subject: Re: [SDR-Radio] rspduo waving signal with SDR console v3 and SDRUno 1.41 b2 Hi Simon, many thanks for reply As you can see: https://youtu.be/HICGceqZzrU situation has not improved. I'll wait for some updates from you. Thanks in advance Cheers Il giorno gio 26 ago 2021 alle ore 18:50 Simon Brown <simon@...> ha scritto: Jacob, Looks like flow control / Latency. Ribbon Bar, Radio, Radio Configuration Set Latency to High If you still have a problem I’ll add more choices. Simon Brown, G4ELI https://www.sdr-radio.com From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of IC8FAX Sent: 26 August 2021 17:33 To: main@sdr-radio.groups.io Subject: Re: [SDR-Radio] rspduo waving signal with SDR console v3 and SDRUno 1.41 b2 Ok, Simon tnx, Jacob Il giorno gio 26 ago 2021 alle ore 16:39 Simon Brown <simon@...> ha scritto: OK, I think I may have to update for the RSPduo, I’ll look at this tomorrow. Simon Brown, G4ELI https://www.sdr-radio.com From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of jacob Sent: 26 August 2021 15:32 To: main@SDR-Radio.groups.io Subject: [SDR-Radio] rspduo waving signal with SDR console v3 and SDRUno 1.41 b2 Hello, at this link: https://youtu.be/olXTIKuYXiU I show what my RSPDUO does with API 3.08 (from SDRPlay) con SDR Console v.3.1 last version. This behaviour doesn't happen if using SDRUno, as showing here: https://youtu.be/h8ho-svM61w Both softwares have default setup. Why into SDR Console I see signal going up and down? Does someone had this trouble? Is not a trouble? I'm using WIN 10 + Intel I5 + 4GB RAM. Thanks in advance. Cheers -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
More All Messages By This Member

3081 - 3100 of 66725

Home Hashtags Subgroups About Features Pricing Updates Terms Help Twitter