Date   

Re: 3.1 Betas

Allan Isaacs
 

Take a promotion Simon.. how does Principal Systems Analyst sound?

Allan G3PIY


From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Simon Brown
Sent: 23 August 2021 11:23
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

The most needed feature is the sole coder takes a break…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


Re: 3.1 Betas

Siegfried Jackstien
 

a break from coding to do other things?? yes that is a good idea (to refresh the brain cells it is good to do other things) ... watching ladies play golf?? ah yes you are on a golf course (or next to it) .. also a god idea ... do not forget to walk the dog ...

what about ferry boat in and a pint?? how are your local covid nmbers?? pubs open or closed??

greetz sigi dg9bfc

Am 23.08.2021 um 12:22 schrieb Simon Brown:

The most needed feature is the sole coder takes a break…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien

What do others think?? What is the most needed feature in sdrc v3??? I am quite sure if you ask here in the group a lot of users would answer backup and restore


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Cordless phone RFI

Siegfried Jackstien
 

GOOD CATCH ... especially the cordless phone (i never thought that a dect phone on 1.8 gig wipes out shortwave on 160 and 80)

also look for the psu of the base unit (those switchers can be noisy) ... either try to filter it out ... or replace the switcher

greetz sigi dg9bfc

Am 23.08.2021 um 12:11 schrieb Allan Isaacs:

I've been plagued by interference on the 80m band for ages and decided to have yet another attempt at tracing its source.
For the test I used an SDR PLay sitting on my desk connected via a USB cable (A plug to B plug) to a computer USB3 socket and a long wire antenna.
I initially looked at narrow spikes every 8KHz from 1.7MHz to 3.752MHz. These were very stable across the range and roughly equal in strength at about -80dBm. I got rid of these by changing the USB lead from a grey one marked Xingong USB Shielded High Speed Revision 2 28AWG/1P + 24AWG/2C to an ancient one, orange in colour with GP on one end. The second cable is fitted with a ferrite ring and reduced the spikes by 18dB to -98dBm. The same ferrite ring had no effect on the first cable.
The next problem was a really annoying pulsing sound producing regular horizontal lines on the waterfall a bit like noise from an electric fence. This was at a rate of 7 pulses per second and I eventually found it was emanating from my cordless phone base unit. Lifting the phone (Siemens Gigaset C430) stopped the pulsing and after replacing it the pulsing restarted after about 30 seconds.
Looking for an RF signal I found this at 1.887GHz. This was relatively stable but slight pulsing was apparent.
A second identical handset in another room was also radiating and pulsing.
The solution was really easy. On the first phone I selected settings, ECO DECT, ticked No Radiation and unticked Maximum Range.
The RF signal disappeared, the trace went completely flat and the pulsing vanished.
I'm now left with just general background mush from countless switching power supplies and the phone but this is now at a fairly low level.
Lifting the phone reduces the level of mush from -98dBm to -104dBm so the next step might be to fit ferrite rings to the base unit power cable and telephone line...
Allan G3PIY


Re: 3.1 Betas

Simon Brown
 

The most needed feature is the sole coder takes a break…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien

What do others think?? What is the most needed feature in sdrc v3??? I am quite sure if you ask here in the group a lot of users would answer backup and restore


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3.1 Betas

Simon Brown
 

  • Watching the ladies play golf in front of the house (2nd tee)

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown
Sent: 23 August 2021 11:14
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

I could do lots of things, including:

 

  • Getting a new POTY installed
  • Getting my 70cms station working
  • Working 2m Tropo
  • Cleaning the gutters on the house
  • Cleaning the house
  • Mowing the lawn
  • Watching the ladies play gold in front of the house (2nd tee)

 

You could learn the art of software engineering 😊 .

 

Will be good weather this week.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien
Sent: 23 August 2021 11:03
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

You could add auto engage for geobeacon in a 1 to 2 kc wide search window... (my tcxo modded lnb drifts maximum 1kc over the day)...

And to try it on your own.. Mount your donated feed (has a similar lnb mounted inside wjth a 0.2ppm tcxo) 

On each start of sdrc v3 i have to catch the beacon and engage locking (press "play" button in beacon window) 

An auto engage would be a nice add on..

And a positiv feedback how well the modded lnb works also would be superb ;-)

Do not wait until winter.. Or you will maybe tell me that it is too cold outside for antenna work (grin)

You wrote you can not do much more... Ok looking on performance you are right.. Cpu load is now very low.. Only thing you can do is some cosmetics.. Solve a few wishes from the todo list.. 

What about adding the values from the power amp to the meters tab in tx box?!? (now meters tab is just a placeholder)...we have already discussed that.... Where do i find the hidden switch for dab decode (joking a bit) 

And what really would be superb.. A backup and restore file for ALL settings.. So if you want to install sdrc v3 on a second pc with similar settings that you can import the settings file from the other pc... With all settings saved in a single file and an import function. Be it filter settings or equalizer or agc or whatever

"do you really want to import these settings?? Yes/no" .... And if user press yes that the setup then is like on the other pc... No idea how complicated that is... But i am sure many users would like to have such a backup and restore function... 

What do others think?? What is the most needed feature in sdrc v3??? I am quite sure if you ask here in the group a lot of users would answer backup and restore

Greetz sigi dg9bfc 

 

Am 23.08.2021 07:44 schrieb Simon Brown <simon@...>:

😊

 

Not much more I can do now .

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien
Sent: 22 August 2021 23:32
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

i can not hear any signal anymore .. why? my cpu is snoring (fallen asleep cause cpu liad is very low) :-)

works superb ...

dg9bfc sigi

ps .. yes the pluito IS running!!

 

Am 22.08.2021 um 20:34 schrieb Simon Brown:

Ah,

 

Thanks – first feedback. I find the sample rate from the RSP can wander a bit until it warms up, then it’s fine. Oh I had some bad code in the SDRplay support…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Brent Seres/ VE3CUS
Sent: 22 August 2021 19:10
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

Hi Simon

 

I downloaded and installed the latest Beta kit. Latency and dropouts seem much improved with my Sdrplay RSP2. Thank you. 

 

73

Brent

VE3CUS 

 

 

 

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3.1 Betas

Simon Brown
 

I could do lots of things, including:

 

  • Getting a new POTY installed
  • Getting my 70cms station working
  • Working 2m Tropo
  • Cleaning the gutters on the house
  • Cleaning the house
  • Mowing the lawn
  • Watching the ladies play gold in front of the house (2nd tee)

 

You could learn the art of software engineering 😊 .

 

Will be good weather this week.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien
Sent: 23 August 2021 11:03
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

You could add auto engage for geobeacon in a 1 to 2 kc wide search window... (my tcxo modded lnb drifts maximum 1kc over the day)...

And to try it on your own.. Mount your donated feed (has a similar lnb mounted inside wjth a 0.2ppm tcxo) 

On each start of sdrc v3 i have to catch the beacon and engage locking (press "play" button in beacon window) 

An auto engage would be a nice add on..

And a positiv feedback how well the modded lnb works also would be superb ;-)

Do not wait until winter.. Or you will maybe tell me that it is too cold outside for antenna work (grin)

You wrote you can not do much more... Ok looking on performance you are right.. Cpu load is now very low.. Only thing you can do is some cosmetics.. Solve a few wishes from the todo list.. 

What about adding the values from the power amp to the meters tab in tx box?!? (now meters tab is just a placeholder)...we have already discussed that.... Where do i find the hidden switch for dab decode (joking a bit) 

And what really would be superb.. A backup and restore file for ALL settings.. So if you want to install sdrc v3 on a second pc with similar settings that you can import the settings file from the other pc... With all settings saved in a single file and an import function. Be it filter settings or equalizer or agc or whatever

"do you really want to import these settings?? Yes/no" .... And if user press yes that the setup then is like on the other pc... No idea how complicated that is... But i am sure many users would like to have such a backup and restore function... 

What do others think?? What is the most needed feature in sdrc v3??? I am quite sure if you ask here in the group a lot of users would answer backup and restore

Greetz sigi dg9bfc 

 

Am 23.08.2021 07:44 schrieb Simon Brown <simon@...>:

😊

 

Not much more I can do now .

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien
Sent: 22 August 2021 23:32
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

i can not hear any signal anymore .. why? my cpu is snoring (fallen asleep cause cpu liad is very low) :-)

works superb ...

dg9bfc sigi

ps .. yes the pluito IS running!!

 

Am 22.08.2021 um 20:34 schrieb Simon Brown:

Ah,

 

Thanks – first feedback. I find the sample rate from the RSP can wander a bit until it warms up, then it’s fine. Oh I had some bad code in the SDRplay support…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Brent Seres/ VE3CUS
Sent: 22 August 2021 19:10
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

Hi Simon

 

I downloaded and installed the latest Beta kit. Latency and dropouts seem much improved with my Sdrplay RSP2. Thank you. 

 

73

Brent

VE3CUS 

 

 

 

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Cordless phone RFI

Allan Isaacs
 

I've been plagued by interference on the 80m band for ages and decided to have yet another attempt at tracing its source.
For the test I used an SDR PLay sitting on my desk connected via a USB cable (A plug to B plug) to a computer USB3 socket and a long wire antenna.
I initially looked at narrow spikes every 8KHz from 1.7MHz to 3.752MHz. These were very stable across the range and roughly equal in strength at about -80dBm. I got rid of these by changing the USB lead from a grey one marked Xingong USB Shielded High Speed Revision 2 28AWG/1P + 24AWG/2C to an ancient one, orange in colour with GP on one end. The second cable is fitted with a ferrite ring and reduced the spikes by 18dB to -98dBm. The same ferrite ring had no effect on the first cable.
The next problem was a really annoying pulsing sound producing regular horizontal lines on the waterfall a bit like noise from an electric fence. This was at a rate of 7 pulses per second and I eventually found it was emanating from my cordless phone base unit. Lifting the phone (Siemens Gigaset C430) stopped the pulsing and after replacing it the pulsing restarted after about 30 seconds.
Looking for an RF signal I found this at 1.887GHz. This was relatively stable but slight pulsing was apparent.
A second identical handset in another room was also radiating and pulsing.
The solution was really easy. On the first phone I selected settings, ECO DECT, ticked No Radiation and unticked Maximum Range.
The RF signal disappeared, the trace went completely flat and the pulsing vanished.
I'm now left with just general background mush from countless switching power supplies and the phone but this is now at a fairly low level.
Lifting the phone reduces the level of mush from -98dBm to -104dBm so the next step might be to fit ferrite rings to the base unit power cable and telephone line...
Allan G3PIY


Re: 3.1 Betas

Siegfried Jackstien
 

You could add auto engage for geobeacon in a 1 to 2 kc wide search window... (my tcxo modded lnb drifts maximum 1kc over the day)...
And to try it on your own.. Mount your donated feed (has a similar lnb mounted inside wjth a 0.2ppm tcxo) 
On each start of sdrc v3 i have to catch the beacon and engage locking (press "play" button in beacon window) 
An auto engage would be a nice add on..
And a positiv feedback how well the modded lnb works also would be superb ;-)
Do not wait until winter.. Or you will maybe tell me that it is too cold outside for antenna work (grin)
You wrote you can not do much more... Ok looking on performance you are right.. Cpu load is now very low.. Only thing you can do is some cosmetics.. Solve a few wishes from the todo list.. 
What about adding the values from the power amp to the meters tab in tx box?!? (now meters tab is just a placeholder)...we have already discussed that.... Where do i find the hidden switch for dab decode (joking a bit) 
And what really would be superb.. A backup and restore file for ALL settings.. So if you want to install sdrc v3 on a second pc with similar settings that you can import the settings file from the other pc... With all settings saved in a single file and an import function. Be it filter settings or equalizer or agc or whatever
"do you really want to import these settings?? Yes/no" .... And if user press yes that the setup then is like on the other pc... No idea how complicated that is... But i am sure many users would like to have such a backup and restore function... 
What do others think?? What is the most needed feature in sdrc v3??? I am quite sure if you ask here in the group a lot of users would answer backup and restore
Greetz sigi dg9bfc 

Am 23.08.2021 07:44 schrieb Simon Brown <simon@...>:

😊

 

Not much more I can do now .

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien
Sent: 22 August 2021 23:32
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

i can not hear any signal anymore .. why? my cpu is snoring (fallen asleep cause cpu liad is very low) :-)

works superb ...

dg9bfc sigi

ps .. yes the pluito IS running!!

 

Am 22.08.2021 um 20:34 schrieb Simon Brown:

Ah,

 

Thanks – first feedback. I find the sample rate from the RSP can wander a bit until it warms up, then it’s fine. Oh I had some bad code in the SDRplay support…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Brent Seres/ VE3CUS
Sent: 22 August 2021 19:10
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

Hi Simon

 

I downloaded and installed the latest Beta kit. Latency and dropouts seem much improved with my Sdrplay RSP2. Thank you. 

 

73

Brent

VE3CUS 

 

 

 

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3.1 Betas

Simon Brown
 

😊

 

Not much more I can do now .

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien
Sent: 22 August 2021 23:32
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

i can not hear any signal anymore .. why? my cpu is snoring (fallen asleep cause cpu liad is very low) :-)

works superb ...

dg9bfc sigi

ps .. yes the pluito IS running!!

 

Am 22.08.2021 um 20:34 schrieb Simon Brown:

Ah,

 

Thanks – first feedback. I find the sample rate from the RSP can wander a bit until it warms up, then it’s fine. Oh I had some bad code in the SDRplay support…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Brent Seres/ VE3CUS
Sent: 22 August 2021 19:10
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

Hi Simon

 

I downloaded and installed the latest Beta kit. Latency and dropouts seem much improved with my Sdrplay RSP2. Thank you. 

 

73

Brent

VE3CUS 

 

 

 

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3.1 Betas

Siegfried Jackstien
 

typo cpu LOAD

Am 23.08.2021 um 00:32 schrieb Siegfried Jackstien:

i can not hear any signal anymore .. why? my cpu is snoring (fallen asleep cause cpu liad is very low) :-)

works superb ...

dg9bfc sigi

ps .. yes the pluito IS running!!


Am 22.08.2021 um 20:34 schrieb Simon Brown:

Ah,

 

Thanks – first feedback. I find the sample rate from the RSP can wander a bit until it warms up, then it’s fine. Oh I had some bad code in the SDRplay support…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Brent Seres/ VE3CUS
Sent: 22 August 2021 19:10
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

Hi Simon

 

I downloaded and installed the latest Beta kit. Latency and dropouts seem much improved with my Sdrplay RSP2. Thank you. 

 

73

Brent

VE3CUS 

 

 

 

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3.1 Betas

Siegfried Jackstien
 

i can not hear any signal anymore .. why? my cpu is snoring (fallen asleep cause cpu liad is very low) :-)

works superb ...

dg9bfc sigi

ps .. yes the pluito IS running!!


Am 22.08.2021 um 20:34 schrieb Simon Brown:

Ah,

 

Thanks – first feedback. I find the sample rate from the RSP can wander a bit until it warms up, then it’s fine. Oh I had some bad code in the SDRplay support…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Brent Seres/ VE3CUS
Sent: 22 August 2021 19:10
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

Hi Simon

 

I downloaded and installed the latest Beta kit. Latency and dropouts seem much improved with my Sdrplay RSP2. Thank you. 

 

73

Brent

VE3CUS 

 

 

 

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3.1 Betas

Simon Brown
 

Ah,

 

Thanks – first feedback. I find the sample rate from the RSP can wander a bit until it warms up, then it’s fine. Oh I had some bad code in the SDRplay support…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Brent Seres/ VE3CUS
Sent: 22 August 2021 19:10
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

Hi Simon

 

I downloaded and installed the latest Beta kit. Latency and dropouts seem much improved with my Sdrplay RSP2. Thank you. 

 

73

Brent

VE3CUS 

 

 

 

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3.1 Betas

Brent Seres/ VE3CUS
 

Hi Simon

I downloaded and installed the latest Beta kit. Latency and dropouts seem much improved with my Sdrplay RSP2. Thank you. 

73
Brent
VE3CUS 





Re: 3.1 Betas

Francesco Di Giovanni
 

Thank you Simon,
nice addiction.

73
Francesco, IN3XZP


Re: 3.1 Betas

Simon Brown
 

Bandplan height, that’s all.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien
Sent: 21 August 2021 20:41
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.1 Betas

 

any major changes against my birthday version??

dg9bfc sigi

 

Am 21.08.2021 um 21:24 schrieb Simon Brown:

SDR Console 3.1 Betas: https://www.sdr-radio.com/version-3-1-betas

 

Toodles

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3.1 Betas

Siegfried Jackstien
 

any major changes against my birthday version??

dg9bfc sigi


Am 21.08.2021 um 21:24 schrieb Simon Brown:

SDR Console 3.1 Betas: https://www.sdr-radio.com/version-3-1-betas

 

Toodles

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


3.1 Betas

Simon Brown
 

SDR Console 3.1 Betas: https://www.sdr-radio.com/version-3-1-betas

 

Toodles

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Windows 11

Siegfried Jackstien
 

win 10 will be fine until 2025 as far as i know .... but that means in a few years i need a newer pc

mine does only suport tpm1.2 and not 2.0 ... maybe i find a way to upgrade that cause that notebook is modular built ... but the cpu also is not listed :-(

i am sure it is fast enough as a quadcore with 32 gb ram clocked with 3.4 to 3.6 ghz ... microsoft should support also a few years older machines if they are not very slow ones ... and find a workaround for the tpm thingy ...

the hardware manufacturers sure want to sell new devices ... but say that a few years old machine is not supported is a bad idea in my view (in fact i would be pissed if i have to throw my notebook in the bin in a few years) ...

this device sure is fast enough and has lots of ram (and two ssd) ... i hope that i can upgrade the tpm (cause that the only problem i see)

greetz sigi dg9bfc


Am 20.08.2021 um 12:47 schrieb Simon Brown:

I think a couple of years. Under the hood it’s unchanged, it’s very much some very nice UI work.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Jim Smith G0OFE
Sent: 20 August 2021 11:44
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Windows 11

 

Wonder how long it will be before we are force-upgraded to W11?

================================
Need help with SDR Console? If you have a problem:
Go to https://www.sdr-radio.com/support
Please follow instructions in that link.
===================================
Jim, Bournemouth, Dorset. IO90BR.
Elad FDM-S2, Airspy HF+, SDRPlay and Funcube Dongle SDR Recievers
8-element OP-DES for Band 2, 8-element LFA for 2m, 3-element LFA for 6m, 20m Windom for HF,. Wellbrook 1530 Loop for LF

On 20/08/2021 09:18, Simon Brown wrote:

Tom,

 

If W10 works OK then stick with it. I do like the UI with W11 – very nice.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Tom Crosbie G6PZZ
Sent: 20 August 2021 09:37
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Windows 11

 

I was wondering if I should upgrade to W11 or not. I think I’ll wait for reports about other apps, OmniRig, etc. before I do though as I don’t have a spare machine at the moment.

 

Tom G6PZZ

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown
Sent: 20 August 2021 08:03
To: sdr-radio@groups.io
Subject: [SDR-Radio] Windows 11

 

Hi,

 

Running the very latest Windows 11 on a Dell i5 laptop, SDR Console running very smoothly.

 

·       Shower

·       Dog walk

·       Bugs…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Windows 11

Gregory Schippers
 

GParted under Linux will fix it. 
Greg, KC8HXO


Re: Windows 11

Brian Morrison
 

On Fri, 2021-08-20 at 13:25 -0400, Jerry Lofstead wrote:
WIN 10 good till 2025

Well, supported...

-- 

Brian  G8SEZ

1641 - 1660 of 65214