Date   

Re: Forums

Simon Brown
 

Thanks 😊 .

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of jdow
Sent: 14 August 2021 06:33
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Forums

 

The scrolling banner could use a little editing. It still thinks 3.1 is a prospective release.

{^_-}

On 20210813 22:20:52, Simon Brown wrote:

So,

 

Woke up this morning, forums misbehaving. Quick reboot of the server and all is now OK.

 

Software…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Forums

jdow
 

The scrolling banner could use a little editing. It still thinks 3.1 is a prospective release.

{^_-}

On 20210813 22:20:52, Simon Brown wrote:

So,

 

Woke up this morning, forums misbehaving. Quick reboot of the server and all is now OK.

 

Software…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: HackRF as Transmitter and Pluto as receiver?

Simon Brown
 

Indeed,

 

Pluto alone is the way to go. I’ll be 64 soon, no more mayor software headaches please – brain can’t handle it 😊 .

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien
Sent: 13 August 2021 21:54
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] HackRF as Transmitter and Pluto as receiver?

 

yes maybe youz could start sdrc 2 times and marriage them via virtual comporst and commander

but in my view its much easier to just use the pluto alone

dg9bfc sigi

Am 13.08.2021 um 21:24 schrieb jdow:

At present you need to make two instances of SDR Console cooperate with each other. I believe this has been done serial interface.

A few minutes of thought suggest it is technically possible to crank the design of something like SDRConsole around to allow different RX and TX conversion stages (front end/back end respectively.) I am not sure that it is technically feasible without a design contemplating this from the very beginning. It breaks just a whole LOT of normal starting conditions for the design of an existing tool.

I'm afraid you are stuck with the hard way in the first paragraph above.
{^_^}

On 20210813 10:41:21, dietrich@... wrote:

For stability reasond I'd like to run like this. But how?

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Forums

Simon Brown
 

So,

 

Woke up this morning, forums misbehaving. Quick reboot of the server and all is now OK.

 

Software…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


From OP: Re: CSVUserList Browser Question

rmrrgs <rgsrose@...>
 

Hi,

My thinking was to use it in "reverse". 
It has the feature where it will try to ID the station you are tuned to from it's database, and pull up the appropriate line of data for displaying.
It works quite well in this mode, and is really helpful

There would then be no need, if used in this mode, for a lot of lines.

I was wondering it it could show across the width at the bottom, e.g., with a vertical
dimension of only 2 or 3 CSVULB lines.

Regards,
Bob


Re: HackRF as Transmitter and Pluto as receiver?

Siegfried Jackstien
 

yes maybe youz could start sdrc 2 times and marriage them via virtual comporst and commander

but in my view its much easier to just use the pluto alone

dg9bfc sigi

Am 13.08.2021 um 21:24 schrieb jdow:

At present you need to make two instances of SDR Console cooperate with each other. I believe this has been done serial interface.

A few minutes of thought suggest it is technically possible to crank the design of something like SDRConsole around to allow different RX and TX conversion stages (front end/back end respectively.) I am not sure that it is technically feasible without a design contemplating this from the very beginning. It breaks just a whole LOT of normal starting conditions for the design of an existing tool.

I'm afraid you are stuck with the hard way in the first paragraph above.
{^_^}

On 20210813 10:41:21, dietrich@... wrote:
For stability reasond I'd like to run like this. But how?


Re: CSVUserList Browser Question

Max
 

There's so much info in the CSVUB windows I would not have thought it would be very practical even if it could be done?

Max


Re: HackRF as Transmitter and Pluto as receiver?

jdow
 

Still, I am afraid Simon will follow thinking a little like mine. While a tool like SDRC can be designed from the bottom up without presumptions of "same clock" and the like, changing an existing design is probably not in the cards.

{^_^}

On 20210813 11:49:33, dietrich@... wrote:
Out of stock... The TCXOs are  not easy to get. Hackrf ist very stabile...


Re: HackRF as Transmitter and Pluto as receiver?

jdow
 

At present you need to make two instances of SDR Console cooperate with each other. I believe this has been done serial interface.

A few minutes of thought suggest it is technically possible to crank the design of something like SDRConsole around to allow different RX and TX conversion stages (front end/back end respectively.) I am not sure that it is technically feasible without a design contemplating this from the very beginning. It breaks just a whole LOT of normal starting conditions for the design of an existing tool.

I'm afraid you are stuck with the hard way in the first paragraph above.
{^_^}

On 20210813 10:41:21, dietrich@... wrote:
For stability reasond I'd like to run like this. But how?


Re: HackRF as Transmitter and Pluto as receiver?

dietrich@...
 

Out of stock... The TCXOs are  not easy to get. Hackrf ist very stabile...


Re: HackRF as Transmitter and Pluto as receiver?

dietrich@...
 

Same when I want to use 2 HackRFs


Re: HackRF as Transmitter and Pluto as receiver?

Siegfried Jackstien
 

use the pluto for rx and tx

either install a better tcxo inside or use external reference

dg9bfc sigi

Am 13.08.2021 um 19:41 schrieb dietrich@...:

For stability reasond I'd like to run like this. But how?


HackRF as Transmitter and Pluto as receiver?

dietrich@...
 

For stability reasond I'd like to run like this. But how?


Re: CSVUserList Browser Question

Lawrence Stoskopf
 

Thank you!


On Aug 13, 2021, at 00:06, Simon Brown <simon@...> wrote:



No.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of rmrrgs
Sent: 12 August 2021 16:23
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] CSVUserList Browser Question

 

Hi,

Is there any way to incorporate CSVUserList Browser directly into one of the
panes or windows in Console ?  And to have it show simply as another window when opening and running Console ?

B.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: CSVUserList Browser Question

Simon Brown
 

No.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of rmrrgs
Sent: 12 August 2021 16:23
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] CSVUserList Browser Question

 

Hi,

Is there any way to incorporate CSVUserList Browser directly into one of the
panes or windows in Console ?  And to have it show simply as another window when opening and running Console ?

B.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


CSVUserList Browser Question

rmrrgs <rgsrose@...>
 

Hi,

Is there any way to incorporate CSVUserList Browser directly into one of the
panes or windows in Console ?  And to have it show simply as another window when opening and running Console ?

B.


Re: Elad S2 2-Meter Reception

Max
 

On Tue, Aug 10, 2021 at 10:14 PM, George Stein - NJ3H wrote:
Please see the attached picture.

One will note the large amount of signals (I call it it interference) displayed across the portion captured.

Does anyone have a clue as to what might be causing this?
Hi George

The acid test is as Mag Loop Simon says. Turn off main power to house then look on SDR with battery powered laptop, also roaming with small whip antenna. Of course it could be coming from the laptop in worst case scenario, but not so likely I would say.

Regular intervals does look like the classic demon, switched mode power supplies. This can include your UPS if you use one? I had a Belkin UPS and it was quite a time before I realised it was by far the worst culprit for noise in my house. Made one huge racket. Dumped it and switched to sinewave unit from Cyberpower. That is whisper quiet. Cured that particular issue totally. So good I bought two, one as a backup purely for fibre broadband kit/network.

But yes, do the "house quiet" technique as the first stop. It's sometimes hard to track down a source inside the house because some (many) SM PSUs put RF on to the house wiring then it seems to be coming from everywhere. Then it's a case of turning off every PSU individually and then turning them on one by one. In my case this mostly resulted in a steady and gentle increase in noise, i.e. many of them were radiating something, and summed together quite a mess. To be fair I've found it a much greater issue on HF rather than at VHF. I think you are a bit unlucky to see this at that frequency. Also look at any LED lighting or security lighting.

By the way, not all SM supplies radiate. There are some (built to the correct regulations with good filtering) that are actually very quiet. Branded is not always a guarantee. Some of my worst offenders have been from Netgear.

Good luck and 73

Max


Re: Cannot view attachments?

Max
 

On Thu, Aug 12, 2021 at 08:58 AM, Allan Isaacs wrote:
I do notice the attachment has .jpeg rather than .jpg
Could it be that the .jpeg isn't linked to a program on your computer?
I've re-attached it above as a .jpg
Hi Allan
 
I see your picture attachment perfectly fine. I'd be surprised if it's the file extension but it's not impossible.
 
Just for info I've got both file extensions in my extensions list in Windows 10, and both defaulted to same app (MS Photos) so I don't think it's a Windoze thing
 
I even tried increasing attachment size limit form 500kb to 5mb in IO Groups (even though as far as I know that's only related to email download) but made no odds, still can't see it. Looks like an IO Groups oddity of some sort. Weird the way it affects some not others.
 
My browser is Chrome, Windows 10, but I've logged in using Edge and Firefox and still same result, nothing visible on the original post but fine on yours.

Max


Re: Cannot view attachments?

Mark Cayton
 

Same here, I don't see any attached file in message 63732, running latest Windows 10, latest Chrome browser.

Mark


Re: Cannot view attachments?

Barry Jablonski
 

Hi Allan,

Your attachment comes through just fine. There was simply no attached file in message/63732. Also, .jpeg would be fine.

Barry
WB2ZXJ

4521 - 4540 of 67966