Date   

Re: 3D Demo

Brian Howell
 

Nice.  I like it.

Brian Howell


From: Denny [mailto:de.k0lgi@...]
Sent: Sunday, May 2, 2021, 1:13 PM
Subject: [SDR-Radio] 3D Demo

It is another method of presenting the waterfall display that is commonly used, including frequency, time, and amplitude in a different display mode ... aka 3D as in this example of multiple meteor returns using Spectrum Lab

Denny - K0LGI -



On Sun, May 2, 2021 at 11:25 AM Siegfried Jackstien <siegfried.jackstien@...> wrote:

oh you see no useful info in a 3d view??

hmm i see the time and strength and position of a signal

and ... i am sure simon will make it selectable (on off) when he adds that to sdr console

greetz sigi dg9bfc

ps i just talked to him on the sat and he told me that it at least does not eat up much cpu power :-)

Am 02.05.2021 um 16:13 schrieb Ken Alexander:
My feeble brain can't extract anything useful out of that.  I hope you keep the 'traditional' FFT spectrum and waterfall displays.

73, 

Ken Alexander VE3HLS 
So Phisai, Thailand (OK18rc)

On Sun, May 2, 2021, 20:14 Simon Brown <simon@...> wrote:

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3D Demo

Tom Crosbie G6PZZ
 

That makes it a little clearer for me.

Don’t forget the 64million colours for the vertical scale, Simon 😊

Tom

G6PZZ

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Denny
Sent: 02 May 2021 18:13
To: main@sdr-radio.groups.io
Subject: Re: [SDR-Radio] 3D Demo

 

It is another method of presenting the waterfall display that is commonly used, including frequency, time, and amplitude in a different display mode ... aka 3D as in this example of multiple meteor returns using Spectrum Lab

 

Denny - K0LGI -

 

 

 

On Sun, May 2, 2021 at 11:25 AM Siegfried Jackstien <siegfried.jackstien@...> wrote:

oh you see no useful info in a 3d view??

hmm i see the time and strength and position of a signal

and ... i am sure simon will make it selectable (on off) when he adds that to sdr console

greetz sigi dg9bfc

ps i just talked to him on the sat and he told me that it at least does not eat up much cpu power :-)

Am 02.05.2021 um 16:13 schrieb Ken Alexander:

My feeble brain can't extract anything useful out of that.  I hope you keep the 'traditional' FFT spectrum and waterfall displays.

 

73, 

Ken Alexander VE3HLS 
So Phisai, Thailand (OK18rc)

 

On Sun, May 2, 2021, 20:14 Simon Brown <simon@...> wrote:


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3D Demo

Ken Alexander
 

Time and signal strength are already displayed in a regular waterfall, as is frequency, which is what I assume you mean by 'position of a signal'.

Ken Alexander  VE3HLS
So Phisai, Thailand (OK18rc)


On Mon, May 3, 2021 at 12:13 AM Denny <de.k0lgi@...> wrote:
It is another method of presenting the waterfall display that is commonly used, including frequency, time, and amplitude in a different display mode ... aka 3D as in this example of multiple meteor returns using Spectrum Lab

Denny - K0LGI -



On Sun, May 2, 2021 at 11:25 AM Siegfried Jackstien <siegfried.jackstien@...> wrote:

oh you see no useful info in a 3d view??

hmm i see the time and strength and position of a signal

and ... i am sure simon will make it selectable (on off) when he adds that to sdr console

greetz sigi dg9bfc

ps i just talked to him on the sat and he told me that it at least does not eat up much cpu power :-)

Am 02.05.2021 um 16:13 schrieb Ken Alexander:
My feeble brain can't extract anything useful out of that.  I hope you keep the 'traditional' FFT spectrum and waterfall displays.

73, 

Ken Alexander VE3HLS 
So Phisai, Thailand (OK18rc)

On Sun, May 2, 2021, 20:14 Simon Brown <simon@...> wrote:

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Using Line-1 out of SDR-Console to WSJTx Audio In

BobS
 

What is the CPU load? When I run both SDR Console & WSJT-X, I run around 40% on my PC with VAC. I generally don't have issues unless I get above 60% CPU.

This behavior also parallels my using DReaM to decode Radio Marti with SDR Console and VAC.


Re: 3D Demo

Denny
 

It is another method of presenting the waterfall display that is commonly used, including frequency, time, and amplitude in a different display mode ... aka 3D as in this example of multiple meteor returns using Spectrum Lab

Denny - K0LGI -



On Sun, May 2, 2021 at 11:25 AM Siegfried Jackstien <siegfried.jackstien@...> wrote:

oh you see no useful info in a 3d view??

hmm i see the time and strength and position of a signal

and ... i am sure simon will make it selectable (on off) when he adds that to sdr console

greetz sigi dg9bfc

ps i just talked to him on the sat and he told me that it at least does not eat up much cpu power :-)

Am 02.05.2021 um 16:13 schrieb Ken Alexander:
My feeble brain can't extract anything useful out of that.  I hope you keep the 'traditional' FFT spectrum and waterfall displays.

73, 

Ken Alexander VE3HLS 
So Phisai, Thailand (OK18rc)

On Sun, May 2, 2021, 20:14 Simon Brown <simon@...> wrote:

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Using Line-1 out of SDR-Console to WSJTx Audio In

NR4U Bob AFMARS
 

If I use the Line-1 VAC output of SDR-Console to the Audio in of WSJTx RC4, I always get delays over 1 second and sometimes 2.5 .

But if I use the Audio Out Codec of the radio to the same WSJTx, then all the dT times are 0.0 to 0.2 seconds.

Is this normal and can it be corrected?
I included a screenshot of what I mean.
--
Bob KD7YZ


Re: 3D Demo

Siegfried Jackstien
 

oh you see no useful info in a 3d view??

hmm i see the time and strength and position of a signal

and ... i am sure simon will make it selectable (on off) when he adds that to sdr console

greetz sigi dg9bfc

ps i just talked to him on the sat and he told me that it at least does not eat up much cpu power :-)

Am 02.05.2021 um 16:13 schrieb Ken Alexander:

My feeble brain can't extract anything useful out of that.  I hope you keep the 'traditional' FFT spectrum and waterfall displays.

73, 

Ken Alexander VE3HLS 
So Phisai, Thailand (OK18rc)

On Sun, May 2, 2021, 20:14 Simon Brown <simon@...> wrote:

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3D Demo

Ken Alexander
 

My feeble brain can't extract anything useful out of that.  I hope you keep the 'traditional' FFT spectrum and waterfall displays.

73, 

Ken Alexander VE3HLS 
So Phisai, Thailand (OK18rc)

On Sun, May 2, 2021, 20:14 Simon Brown <simon@...> wrote:

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3D Demo

Matthias Bopp
 

Hi Simon,

 

interesting. I am sure there was a lot of work behind the scene to get to this point.

 

I am still not sure about the practical value in operations but maybe one needs to use it and then recognize the benefits.

 

Kind regards

 

Matthias

 

www.dd1us.de

 

 

Von: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Im Auftrag von Simon Brown
Gesendet: Sonntag, 2. Mai 2021 15:10
An: SDR-Radio@groups.io
Betreff: [SDR-Radio] 3D Demo

 

https://youtu.be/dmJUvt2mwyQ

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3D Demo

Brian Howell
 

Fantastic!!

Brian Howell


From: Simon Brown [mailto:simon@...]
Sent: Sunday, May 2, 2021, 11:19 AM
Subject: [SDR-Radio] 3D Demo

Yes 😊

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Brian Howell

Will the users also be able to control the rotation of the 3D waterfall?  Like drag it with the mouse or position it precisely by typing in a specific angle and elevation?


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3D Demo

Simon Brown
 

Yes 😊

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Brian Howell

Will the users also be able to control the rotation of the 3D waterfall?  Like drag it with the mouse or position it precisely by typing in a specific angle and elevation?


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3D Demo

Brian Howell
 

WOW!  Very nice!  It is looking fantastic.  This is going to look great, I can only imagine what it will look like integrated into SDRConsole.

Will the users also be able to control the rotation of the 3D waterfall?  Like drag it with the mouse or position it precisely by typing in a specific angle and elevation?

Great work so far, I'm very excited.

Brian Howell


From: Simon Brown [mailto:simon@...]
Sent: Sunday, May 2, 2021, 9:09 AM
Subject: [SDR-Radio] 3D Demo


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Dead Andrus

Simon Brown
 

Hi,

 

There’s not much I can do – the Andrus just pretends to be a NetSDR. Maybe time for a replacement – SDRplay / Airspy / Winradio…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Allan Isaacs
Sent: 02 May 2021 14:31
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Dead Andrus

 

About the time the Andrus failed I was examining the code associated with control of the Andrus to see if I could identify how to switch from Aerial A to Aerial B. I wonder if I closed a text reader and inadvertently changed the code.

This may have been a coincidence. I re-installed an earlier version of the console but it may be possible the file wasn’t corrected.. if indeed I changed it?

I have a second computer with the console installed so I might try that before I proceed.

 

After I got the Andrus I needed to swap the LAN chip which had gone short circuit. The new chip worked fine but I may have missed fully soldering all of its pins. I guess the LAN chip receives the data from the receiver but does that connection share control data? If control from the console is working correctly then that would disprove that idea.

 

Another possibility is lightning has damaged the front end (Channel A) which is an LMH6514 chip. Is it possible to change to Channel B input to check this hypothesis? Otherwise, if the LMH6514 is indeed dead would the processor still read noise and drive the console?

Allan


From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Simon Brown
Sent: 02 May 2021 14:06
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Dead Andrus

 

Hi,

 

Some command control is working, just no UDP packets received so I don’t think it’s hardware.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Allan Isaacs
Sent: 02 May 2021 10:02
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Dead Andrus

 

I don’t believe it’s a firewall problem Simon.

More tests needed but its looking like a really nasty hardware fault.

Time to dig out the circuit diagram and an oscilloscope unless there’s an Andrus diagnostic program?

I wonder if Andrus Aaslaid still listens into this forum or may another Mk1.5 user can help?

Allan G3PIY


From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Simon Brown
Sent: 29 April 2021 18:35
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Dead Andrus

 

Hi,

 

It’s just not sending data. Firewall change maybe?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Allan Isaacs
Sent: 29 April 2021 18:15
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Dead Andrus

 

My Andrus SDR was working quite happily in my workshop, connected via my LAN until recently when it just stopped.
Attached is the logfile from today.
The thing is powered via its USB connector and everything appears to work except there's no signal passed to SDR Console.
Any ideas?
Allan G3PIY

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Dead Andrus

Allan Isaacs
 

About the time the Andrus failed I was examining the code associated with control of the Andrus to see if I could identify how to switch from Aerial A to Aerial B. I wonder if I closed a text reader and inadvertently changed the code.

This may have been a coincidence. I re-installed an earlier version of the console but it may be possible the file wasn’t corrected.. if indeed I changed it?

I have a second computer with the console installed so I might try that before I proceed.

 

After I got the Andrus I needed to swap the LAN chip which had gone short circuit. The new chip worked fine but I may have missed fully soldering all of its pins. I guess the LAN chip receives the data from the receiver but does that connection share control data? If control from the console is working correctly then that would disprove that idea.

 

Another possibility is lightning has damaged the front end (Channel A) which is an LMH6514 chip. Is it possible to change to Channel B input to check this hypothesis? Otherwise, if the LMH6514 is indeed dead would the processor still read noise and drive the console?

Allan


From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Simon Brown
Sent: 02 May 2021 14:06
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Dead Andrus

 

Hi,

 

Some command control is working, just no UDP packets received so I don’t think it’s hardware.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Allan Isaacs
Sent: 02 May 2021 10:02
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Dead Andrus

 

I don’t believe it’s a firewall problem Simon.

More tests needed but its looking like a really nasty hardware fault.

Time to dig out the circuit diagram and an oscilloscope unless there’s an Andrus diagnostic program?

I wonder if Andrus Aaslaid still listens into this forum or may another Mk1.5 user can help?

Allan G3PIY


From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Simon Brown
Sent: 29 April 2021 18:35
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Dead Andrus

 

Hi,

 

It’s just not sending data. Firewall change maybe?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Allan Isaacs
Sent: 29 April 2021 18:15
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Dead Andrus

 

My Andrus SDR was working quite happily in my workshop, connected via my LAN until recently when it just stopped.
Attached is the logfile from today.
The thing is powered via its USB connector and everything appears to work except there's no signal passed to SDR Console.
Any ideas?
Allan G3PIY




--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


3D Demo

Simon Brown
 

https://youtu.be/dmJUvt2mwyQ

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Dead Andrus

Simon Brown
 

Hi,

 

Some command control is working, just no UDP packets received so I don’t think it’s hardware.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Allan Isaacs
Sent: 02 May 2021 10:02
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Dead Andrus

 

I don’t believe it’s a firewall problem Simon.

More tests needed but its looking like a really nasty hardware fault.

Time to dig out the circuit diagram and an oscilloscope unless there’s an Andrus diagnostic program?

I wonder if Andrus Aaslaid still listens into this forum or may another Mk1.5 user can help?

Allan G3PIY


From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Simon Brown
Sent: 29 April 2021 18:35
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Dead Andrus

 

Hi,

 

It’s just not sending data. Firewall change maybe?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Allan Isaacs
Sent: 29 April 2021 18:15
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Dead Andrus

 

My Andrus SDR was working quite happily in my workshop, connected via my LAN until recently when it just stopped.
Attached is the logfile from today.
The thing is powered via its USB connector and everything appears to work except there's no signal passed to SDR Console.
Any ideas?
Allan G3PIY





--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: V3 frequency change via scroll wheel?

Kriss Kliegle KA1GJU
 

Negative. If I understand your question correctly.
Scroll  wheel tuning only active while actively scrolling. Tuning occurs in the steps set in the Mode panel (v3.0.26? and later) of the DSP panel or under Tools, Options, Tuning. Not a hold down and continuous frequency change button.

73 Kriss KA1GJU


Re: Dead Andrus

Allan Isaacs
 

I don’t believe it’s a firewall problem Simon.

More tests needed but its looking like a really nasty hardware fault.

Time to dig out the circuit diagram and an oscilloscope unless there’s an Andrus diagnostic program?

I wonder if Andrus Aaslaid still listens into this forum or may another Mk1.5 user can help?

Allan G3PIY


From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Simon Brown
Sent: 29 April 2021 18:35
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Dead Andrus

 

Hi,

 

It’s just not sending data. Firewall change maybe?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Allan Isaacs
Sent: 29 April 2021 18:15
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Dead Andrus

 

My Andrus SDR was working quite happily in my workshop, connected via my LAN until recently when it just stopped.
Attached is the logfile from today.
The thing is powered via its USB connector and everything appears to work except there's no signal passed to SDR Console.
Any ideas?
Allan G3PIY




V3 frequency change via scroll wheel?

David Coles
 

Long-term user with pleasure of both Console V2
and V3. Curiously, and unlike V2, V3 frequency
is unable to be continuously changed via the scroll
wheel. Do I have a problem? Dave G7GZC  


Re: True!

jdow
 

If not then you are in deeper doo-doo than I thought. These are the people who make your life style possible.

{o.o}

On 20210430 03:58:57, Miguel EC5W wrote:
Not applicable to new millennials :-) 

Miguel Tecles


El 30 abr 2021, a las 8:27, Simon Brown <simon@...> escribió:


<image001.png>

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

5121 - 5140 of 67335