Date   

Re: 3.0.26

DL6SH Slawek
 

Hi Simon,

ok thank you.

VAC does not work with proper bandwith.

With Linrad I am not happy.

If not possible, forget it.

73, Slawek, dl6sh



Am 14.12.2020 um 19:09 schrieb Simon Brown:

I ran out of time. I must contact Lief; the interface doesn’t seem to be documented.

 

Why not use WSJT and a VAC?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of DL6SH Slawek
Sent: 14 December 2020 16:00
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.0.26

 

Hello Simon,

 

nice to see a new version.

 

Unfortunatelly I have not seen any feedback to MAP65 Interface..... 

Any plans?

 

TNX es 73, Slawek dl6sh

 

 

Am 14.12.2020 um 16:26 schrieb Jempi ( ON7MA ):

Tnx Simon, Good XMas to U and the family

Still sorry to see no support for HackRF TX :-(

When onde day U should have the time ?

Tnx

JP

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.



Re: 3.0.26

Simon Brown
 

Maybe,

 

But I do support Pluto.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Jempi ( ON7MA )
Sent: 14 December 2020 15:26
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.0.26

 

Tnx Simon, Good XMas to U and the family

Still sorry to see no support for HackRF TX :-(

When onde day U should have the time ?

Tnx

JP


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: problem on init of rtl-sdr

Simon Brown
 

Please post this problem in the new forums (URL) below and add screenshots.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Oguzhan Kayhan
Sent: 14 December 2020 17:10
To: SDR-Radio@groups.io
Subject: [SDR-Radio] problem on init of rtl-sdr

 

Hello Simon

I am not sure if this was discussed before.

This is what happens.

When I start the console, if the frequency is with offset (for oscar-100 rx) my waterfall has no visible signals even if it is set to the correct frequency.(there is white noise present) 

When I change the frequency to something else  and return back to the first frequency, everything works.

I recorded a screen capture at https://yadi.sk/d/sz8KuHXGRdksww

In the first seconds, it is not visible but I am selecting rtl-srd radio..

Then you will see a spectrum without any signals after I change the frequency.

 

Regards

de TA2NC

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3.0.26

Simon Brown
 

I ran out of time. I must contact Lief; the interface doesn’t seem to be documented.

 

Why not use WSJT and a VAC?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of DL6SH Slawek
Sent: 14 December 2020 16:00
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 3.0.26

 

Hello Simon,

 

nice to see a new version.

 

Unfortunatelly I have not seen any feedback to MAP65 Interface..... 

Any plans?

 

TNX es 73, Slawek dl6sh

 

 

Am 14.12.2020 um 16:26 schrieb Jempi ( ON7MA ):

Tnx Simon, Good XMas to U and the family

Still sorry to see no support for HackRF TX :-(

When onde day U should have the time ?

Tnx

JP

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 3.0.26

N2MS
 

Simon,
 
Thanks for the effort, especially the support for the RX-888. I enjoy viewing a wide spectrum and this SDR, along with your great software provides this ability.
 
For those considering the RX-888 it consumes lots of current so I would recommend connecting it directly to a USB-3 port. I tried to measure the current with  USB power meter and the combination of additional connections and a current shunt caused erratic operation of the RX-888.
 
I sent some funds for Christmas cookies for you and your dog.
 
73 Mike N2MS

On 12/14/2020 8:14 AM Simon Brown <simon@...> wrote:
 
 

Version 3.0.26 of SDR Console now available in time for the holidays: https://forum.sdr-radio.com:4499/viewtopic.php?f=66&t=604

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


Re: 3.0.26

EA7HGL
 

Muchas gracias por tu trabajo y esfuerzo. Que el próximo año te vaya todo bien.


Thank you very much for your work and effort. May everything go well next year.

Antonio D. (EA7HGL)

 


problem on init of rtl-sdr

Oguzhan Kayhan
 

Hello Simon
I am not sure if this was discussed before.
This is what happens.
When I start the console, if the frequency is with offset (for oscar-100 rx) my waterfall has no visible signals even if it is set to the correct frequency.(there is white noise present) 
When I change the frequency to something else  and return back to the first frequency, everything works.
I recorded a screen capture at https://yadi.sk/d/sz8KuHXGRdksww
In the first seconds, it is not visible but I am selecting rtl-srd radio..
Then you will see a spectrum without any signals after I change the frequency.

Regards
de TA2NC


Re: 3.0.26

DL6SH Slawek
 

Hello Simon,

nice to see a new version.

Unfortunatelly I have not seen any feedback to MAP65 Interface..... 
Any plans?

TNX es 73, Slawek dl6sh


Am 14.12.2020 um 16:26 schrieb Jempi ( ON7MA ):

Tnx Simon, Good XMas to U and the family

Still sorry to see no support for HackRF TX :-(

When onde day U should have the time ?

Tnx

JP



Re: 3.0.26

Jempi ( ON7MA )
 

Tnx Simon, Good XMas to U and the family

Still sorry to see no support for HackRF TX :-(

When onde day U should have the time ?

Tnx

JP


Re: Elad S3 and optional filters

Francesco Di Giovanni
 

Thank you Simon. 
Excellent job!

73
Francesco, IN3XZP 


3.0.26

Simon Brown
 

Version 3.0.26 of SDR Console now available in time for the holidays: https://forum.sdr-radio.com:4499/viewtopic.php?f=66&t=604

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Elad S3 and optional filters

Simon Brown
 

Yes.

 

3.0.26 will be released today.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Francesco Di Giovanni
Sent: 14 December 2020 07:54
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Elad S3 and optional filters

 

Hi, 
does SDR Console supports the optional filter of
the Elad FDM-S3?
I want to plug-in a pair of extra embedded filter. 

73
Francesco, IN3XZP 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Moving onto to Ferrite loop antenna Part 1

Francesco Di Giovanni
 

Nice video Paul.
Could you please make the tests with an SDR receiver?
The effects of the antenna tuning should be more visible on the sdr window than on the Sony LED S-meter,
but the noise will easily be higher.

73
Francesco, IN3XZP


Elad S3 and optional filters

Francesco Di Giovanni
 

Hi, 
does SDR Console supports the optional filter of
the Elad FDM-S3?
I want to plug-in a pair of extra embedded filter. 

73
Francesco, IN3XZP 


Moving onto to Ferrite loop antenna Part 1

Paul Cianciolo
 

From the air core open frame loop we begin some experiments with a large ferrite loop antenna 16" long.

https://youtu.be/Kqh5Egn2qh8
W1VLF


Re: My frequency spectrum is being shown inverted. Why?

Simon Brown
 

Indeed,

 

Santa’s gifts are always welcome, many thanks.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Bob KW4CQ
Sent: 13 December 2020 15:14
To: main@sdr-radio.groups.io
Subject: Re: [SDR-Radio] My frequency spectrum is being shown inverted. Why?

 

Simon,

That works for me!  Freq display now corrected and so was the High slider.  I had to use the Ribbon/View/Scale approach to make it work. Thank you Simon,  Santa Clause is on his way to your house.

73 from Bob KW4CQ

 

On Sun, Dec 13, 2020 at 9:57 AM Simon Brown <simon@...> wrote:

Bob,

 

Click in the V shaped scale OR use Ribbon Bar, View, Spectrum and select from the Scale dropdown.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Bob KW4CQ
Sent: 13 December 2020 14:53
To: main@sdr-radio.groups.io
Subject: Re: [SDR-Radio] My frequency spectrum is being shown inverted. Why?

 

Simon,

I tried your suggestion and it does not work for me.  I also noticed that while the Low slider works fine the High slider does not have an up/down slider showing.  Just the V shaped scale.

Bob

 

On Sun, Dec 13, 2020 at 9:33 AM Barry Jablonski <bjablonski@...> wrote:

Thanks Jean,

Issue solved.

I never tried this.

Barry
WB2ZXJ




--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: My frequency spectrum is being shown inverted. Why?

Bob KW4CQ
 

Simon,
That works for me!  Freq display now corrected and so was the High slider.  I had to use the Ribbon/View/Scale approach to make it work. Thank you Simon,  Santa Clause is on his way to your house.
73 from Bob KW4CQ

On Sun, Dec 13, 2020 at 9:57 AM Simon Brown <simon@...> wrote:

Bob,

 

Click in the V shaped scale OR use Ribbon Bar, View, Spectrum and select from the Scale dropdown.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Bob KW4CQ
Sent: 13 December 2020 14:53
To: main@sdr-radio.groups.io
Subject: Re: [SDR-Radio] My frequency spectrum is being shown inverted. Why?

 

Simon,

I tried your suggestion and it does not work for me.  I also noticed that while the Low slider works fine the High slider does not have an up/down slider showing.  Just the V shaped scale.

Bob

 

On Sun, Dec 13, 2020 at 9:33 AM Barry Jablonski <bjablonski@...> wrote:

Thanks Jean,

Issue solved.

I never tried this.

Barry
WB2ZXJ





--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: My frequency spectrum is being shown inverted. Why?

Simon Brown
 

Bob,

 

Click in the V shaped scale OR use Ribbon Bar, View, Spectrum and select from the Scale dropdown.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Bob KW4CQ
Sent: 13 December 2020 14:53
To: main@sdr-radio.groups.io
Subject: Re: [SDR-Radio] My frequency spectrum is being shown inverted. Why?

 

Simon,

I tried your suggestion and it does not work for me.  I also noticed that while the Low slider works fine the High slider does not have an up/down slider showing.  Just the V shaped scale.

Bob

 

On Sun, Dec 13, 2020 at 9:33 AM Barry Jablonski <bjablonski@...> wrote:

Thanks Jean,

Issue solved.

I never tried this.

Barry
WB2ZXJ





--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: My frequency spectrum is being shown inverted. Why?

Bob KW4CQ
 

Simon,
I tried your suggestion and it does not work for me.  I also noticed that while the Low slider works fine the High slider does not have an up/down slider showing.  Just the V shaped scale.
Bob

On Sun, Dec 13, 2020 at 9:33 AM Barry Jablonski <bjablonski@...> wrote:
Thanks Jean,

Issue solved.

I never tried this.

Barry
WB2ZXJ






Re: My frequency spectrum is being shown inverted. Why?

Barry Jablonski
 

Thanks Jean,

Issue solved.

I never tried this.

Barry
WB2ZXJ

3861 - 3880 of 64334