Date   

Re: Loading Dan Ferguson's Composite File Into Frequency Database ?

Simon Brown
 

Hi,

 

There’s a Hz / kHz selection that’s not been used – I have made this more obvious in 3.0.19.

 

When loading Dan’s database load the frequencies as Hz.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of rmrrgs
Sent: 10 January 2020 21:13
To: main@sdr-radio.groups.io
Subject: Re: [SDR-Radio] Loading Dan Ferguson's Composite File Into Frequency Database ?

 

Hi

 

Thanks for the help. Appreciated. 

 

Is it the regular database file from Dan Ferguson you want me to send to you ?

 

Where should I send it please ? Link ?

 

Bob



On Jan 10, 2020, at 3:20 PM, Simon Brown <simon@...> wrote:



Bob,

 

Send me a copy of this file please.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of rmrrgs
Sent: 10 January 2020 19:16
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Loading Dan Ferguson's Composite File Into Frequency Database ?

 

Hello,

Trying to import Dan Ferguson's latest file into Frequency Database.
Using the Custom CSV option
I then LOAD Custom File, and Dan's composite file.   (.csv format)
Seems to have loaded just fine.

I then go to ADD to Database and pick Replace.  
Not sure if this is what I should pick, but it does say "Existing Custom Entries are deleted".
So, i assume any old "stuff" is simply deleted ?

I then see a msg. that says:  Added 21,469 records to table Freq Data102
No idea what this is ?

I would then assume it would show up in the main Frequency database window, as it has been, presumably, "Loaded".
It doesn't.
Only the previous file I loaded, ILG's is  still there.

Any idea why ?
Something i have to do with that file that was mentioned: table FreqData_102  ?

Thoughts ?

Bob


Re: Website Insecure - Warning

Simon Brown
 

OK,

Been reading about contrast online, have learnt a lot. Website update to use same colours as CNN and same text font size.

Thanks for the complaints...

Simon Brown, G4ELI
https://www.sdr-radio.com

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of David J Taylor via Groups.Io
Sent: 10 January 2020 18:09
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Website Insecure - Warning

Hi,

I agree with the grumbles. What’s very good with the duda.co website builder is I can change the text font / colour for all pages with just a few clicks.

https://www.dit-dit-dit.com/

I’ve increased the default text size from 15 to 18 and changed the colour from RGB (100, 100, 100) to RGB (50, 50, 50) – i.e. bigger and darker.

I’ll do this for https://www.sdr-radio.com/ after I get the next beta out.

Simon Brown, G4ELI
https://www.sdr-radio.com
=============================================

Thanks!

David
--
SatSignal Software - Quality software for you
Web: http://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: "decouple" spectrum zoom from sample rate / bandwidth change ? #sdrconsolev3

Zacharias Liangas
 

>>>Simon could you add a hotkey to the screenshot function because with options / menu open they hide when you move the mouse t the Screenshot button

solution  : Customize>screenshot >current keys >press a new key >assign

Also use the camera button on the top part of the SDRC screen



Re: Loading Dan Ferguson's Composite File Into Frequency Database ?

rmrrgs <rgsrose@...>
 

Hi

Thanks for the help. Appreciated. 

Is it the regular database file from Dan Ferguson you want me to send to you ?

Where should I send it please ? Link ?

Bob


On Jan 10, 2020, at 3:20 PM, Simon Brown <simon@...> wrote:



Bob,

 

Send me a copy of this file please.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of rmrrgs
Sent: 10 January 2020 19:16
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Loading Dan Ferguson's Composite File Into Frequency Database ?

 

Hello,

Trying to import Dan Ferguson's latest file into Frequency Database.
Using the Custom CSV option
I then LOAD Custom File, and Dan's composite file.   (.csv format)
Seems to have loaded just fine.

I then go to ADD to Database and pick Replace.  
Not sure if this is what I should pick, but it does say "Existing Custom Entries are deleted".
So, i assume any old "stuff" is simply deleted ?

I then see a msg. that says:  Added 21,469 records to table Freq Data102
No idea what this is ?

I would then assume it would show up in the main Frequency database window, as it has been, presumably, "Loaded".
It doesn't.
Only the previous file I loaded, ILG's is  still there.

Any idea why ?
Something i have to do with that file that was mentioned: table FreqData_102  ?

Thoughts ?

Bob


Re: Signal History Monitor #sdrconsolev3

Zacharias Liangas
 
Edited

Yes i know that, but i m expecting to use the  live history monitor instead of csv for immediate usage with spectrum and waterfall while i m dong a report!


Re: Wrong RDS -RBDS Regon dispalyed (SDR Console 3.0.18 with RSPdx)

BFBoise
 


Once I figured out what the "Main" button meant I foud it.

Thank you.

Bill


Re: Loading Dan Ferguson's Composite File Into Frequency Database ?

Simon Brown
 

Bob,

 

Send me a copy of this file please.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of rmrrgs
Sent: 10 January 2020 19:16
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Loading Dan Ferguson's Composite File Into Frequency Database ?

 

Hello,

Trying to import Dan Ferguson's latest file into Frequency Database.
Using the Custom CSV option
I then LOAD Custom File, and Dan's composite file.   (.csv format)
Seems to have loaded just fine.

I then go to ADD to Database and pick Replace.  
Not sure if this is what I should pick, but it does say "Existing Custom Entries are deleted".
So, i assume any old "stuff" is simply deleted ?

I then see a msg. that says:  Added 21,469 records to table Freq Data102
No idea what this is ?

I would then assume it would show up in the main Frequency database window, as it has been, presumably, "Loaded".
It doesn't.
Only the previous file I loaded, ILG's is  still there.

Any idea why ?
Something i have to do with that file that was mentioned: table FreqData_102  ?

Thoughts ?

Bob


Re: Wrong RDS -RBDS Regon dispalyed (SDR Console 3.0.18 with RSPdx)

Simon Brown
 

Hi,

 

https://www.sdr-radio.com/modes#BroadcastFM

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of BFBoise
Sent: 10 January 2020 19:20
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Wrong RDS -RBDS Regon dispalyed (SDR Console 3.0.18 with RSPdx)

 

I've seen that display, Once.

It went away. I closed it or minimized it now I can't find how to open it.

RDS in enabled.


Re: V2.3 Update error message

Simon Brown
 

Ah,

That's a missing runtime - will check this first thing tomorrow morning.

Simon Brown, G4ELI
https://www.sdr-radio.com

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of OH1KIO
Sent: 10 January 2020 20:05
To: main@sdr-radio.groups.io
Subject: [SDR-Radio] V2.3 Update error message

Thanks for final update of the V2.3!

However; when I install update 3805, the console no longer starts.
Instead I get an error message: "The ordinal 14056 could not be located in the dynamic link library mfc100u.dll". Running Win7 pro 64bit

Uninstalled the update and downgraded to an older version which I found from my hard drive. That works fine (except that the license has expired, of course). Re-installed 3805, same error message again.

What could I try next?


V2.3 Update error message

OH1KIO
 

Thanks for final update of the V2.3!

However; when I install update 3805, the console no longer starts.
Instead I get an error message: "The ordinal 14056 could not be
located in the dynamic link library mfc100u.dll". Running Win7 pro
64bit

Uninstalled the update and downgraded to an older version which I
found from my hard drive. That works fine (except that the license has
expired, of course). Re-installed 3805, same error message again.

What could I try next?


Re: Wrong RDS -RBDS Regon dispalyed (SDR Console 3.0.18 with RSPdx)

BFBoise
 

I've seen that display, Once.

It went away. I closed it or minimized it now I can't find how to open it.

RDS in enabled.


Loading Dan Ferguson's Composite File Into Frequency Database ?

rmrrgs <rgsrose@...>
 

Hello,

Trying to import Dan Ferguson's latest file into Frequency Database.
Using the Custom CSV option
I then LOAD Custom File, and Dan's composite file.   (.csv format)
Seems to have loaded just fine.

I then go to ADD to Database and pick Replace.  
Not sure if this is what I should pick, but it does say "Existing Custom Entries are deleted".
So, i assume any old "stuff" is simply deleted ?

I then see a msg. that says:  Added 21,469 records to table Freq Data102
No idea what this is ?

I would then assume it would show up in the main Frequency database window, as it has been, presumably, "Loaded".
It doesn't.
Only the previous file I loaded, ILG's is  still there.

Any idea why ?
Something i have to do with that file that was mentioned: table FreqData_102  ?

Thoughts ?

Bob


Re: Website Insecure - Warning

David J Taylor
 

Hi,

I agree with the grumbles. What’s very good with the duda.co website builder is I can change the text font / colour for all pages with just a few clicks.

https://www.dit-dit-dit.com/

I’ve increased the default text size from 15 to 18 and changed the colour from RGB (100, 100, 100) to RGB (50, 50, 50) – i.e. bigger and darker.

I’ll do this for https://www.sdr-radio.com/ after I get the next beta out.

Simon Brown, G4ELI
https://www.sdr-radio.com
=============================================

Thanks!

David
--
SatSignal Software - Quality software for you
Web: http://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: RSPDX CWskimmer SDR Console

Andy - DL1DXX
 

Hi all

I had a bit the same proplem. When working e.g. first with FT8 and then I would like to switch to

V3 with cw skimmer - it will not work.


But:

Starting the Computer new, and then starting

1: SDR Console V3

2: FT5K start

3: Interface USB III start -> Button V3 Console

4: CW Skimmer start

everything is working fine. Switching again to FT8 and then back to V3 with cw skimmer - it will not work

- and I didn't changed anything. Don't know why. But I'm able to use it.


vy 73 Andy - DL1DXX



Re: Website Insecure - Warning

Simon Brown
 

Hi,

 

I agree with the grumbles. What’s very good with the duda.co website builder is I can change the text font / colour for all pages with just a few clicks.

 

https://www.dit-dit-dit.com/

 

I’ve increased the default text size from 15 to 18 and changed the colour from RGB (100, 100, 100) to RGB (50, 50, 50) – i.e. bigger and darker.

 

I’ll do this for https://www.sdr-radio.com/ after I get the next beta out.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Hasan Schiers N0AN
Sent: 10 January 2020 14:24
To: main <main@sdr-radio.groups.io>
Subject: Re: [SDR-Radio] Website Insecure - Warning

 

I agree, it needs more contrast. Old eyes!

73, N0AN

Hasan

 

 

On Fri, Jan 10, 2020 at 3:37 AM David J Taylor via Groups.Io <david-taylor=blueyonder.co.uk@groups.io> wrote:

I have to agree, and my eyesight is not too bad.

73 Alan G4ZFQ
===================================

For a web site which is intended to convey information rather than be pretty
pictures, the user should determine the displayed text colour and size etc.,
and not the web site.  The user knows their own eyesight capabilities, and
devices like Kindles allow for this.  Not to mention the wasted effort when
creating the site.

73,
David GM8ARV
--
SatSignal Software - Quality software for you
Web: http://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv




Re: Signal History Monitor #sdrconsolev3

Ben Z en de rest
 

Hi, in V 3.0.17, if I enable the Signal History, in that window, left side, a menu with 3 tiny dots appear.

That gives me the "configuration" where I can set aa buffer up to 48 hours which I can export as csv.

Guess that should work for you too ?

Regards,
Ben


"decouple" spectrum zoom from sample rate / bandwidth change ? #sdrconsolev3

Ben Z en de rest
 

Hi, running SDR-Console V3, when changing the bandwidth (Arispy miny for example) from 750 kHz to 1500 kHz the zoom for the received spectrum automagically adapts so I still only see the 750 kHz, I have to manually zoom out to get the full selected bandwidth  I am trying to find a setting to have the zoom by default on minimum after change of bandwidth because I usually switch to a higher bandwidth to see more.

Is that possible ?

Thanks,

Ben - PE2BZ

@Simon could you add a hotkey to the screenshot function because with options / menu open they hide when you move the mouse t the Screenshot button. 


Signal History Monitor #sdrconsolev3

Zacharias Liangas
 

I really wonder if Simon can make a small addition to the the signal history monitor to show more than 240 secs.
If possible that this monitor can be user defined


Re: RSPDX CWskimmer SDR Console

Bill Alpert
 

Andrew, are you using the most recent version od SDRC?
--
73 de Bill / KG6NRV


Re: Website Insecure - Warning

Hasan Schiers N0AN
 

I agree, it needs more contrast. Old eyes!
73, N0AN
Hasan


On Fri, Jan 10, 2020 at 3:37 AM David J Taylor via Groups.Io <david-taylor=blueyonder.co.uk@groups.io> wrote:

I have to agree, and my eyesight is not too bad.

73 Alan G4ZFQ
===================================

For a web site which is intended to convey information rather than be pretty
pictures, the user should determine the displayed text colour and size etc.,
and not the web site.  The user knows their own eyesight capabilities, and
devices like Kindles allow for this.  Not to mention the wasted effort when
creating the site.

73,
David GM8ARV
--
SatSignal Software - Quality software for you
Web: http://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv




16181 - 16200 of 68673