Date   

Re: No audio after updating win 10 #sdrconsolev3

Selwyn Warren <selwarrentv81@...>
 

The audio hardware is internal and it is named "High Definition Audio Device" manufacturer is Microsoft.  I do have a external M-AUDIO  Mobile Pre USB that I haven't been using for the last 2 or 3 years because the internal hardware works fine. I'll reinstall using the external M-Audio Device.  Another problem showed up this morning....Bandwidth, Calibration, Frequency, Previous , and history are grayed out.  I haven't had this new problem, ever, until now.


On Thu, Dec 19, 2019 at 2:28 AM Simon Brown <simon@...> wrote:

I have an idea:

 

Don’t install every pre-release that appears. Also, SDR Console uses WASAPI, SDRuno uses other APIs.

 

What is the audio hardware you use?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Selwyn Warren
Sent: 18 December 2019 21:36
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] No audio after updating win 10 #sdrconsolev3

 

I am using SDR Console version 3.0.17  build 1686.   Every time I update win 10 OS pre-releases audio doesn't work.  It always involves the audio drivers. Uninstalling the audio drivers in Device Manager and restarting the PC some times fixes the problem.  Uninstalling the audio drivers and re-installing manually sometimes fixes the problem.  This time after the latest win 10 OS update last night nothing fixes it.  I have SDRuno installed on the same PC and have never had a problem with it.

Any ideas?


Re: API v3 & RSPDx support in SDR-Console?

ian
 

hi simon another one here offering to test with the rsp dx if required cheers


Re: API v3 & RSPDx support in SDR-Console?

Neil M6JNA
 

neilwatling@... is my mail addy, if I can be added it would be much appreciated.

Thanks


Join group

Mark G0MBZ
 

 


#sdrconsolev3 #pluto #pluto #sdrconsolev3

Nigel Hall
 

Hi

Most excellent software.

I'm experimenting with a PlutoSDR and have the satellite software as part of 3.0.17 operating.  I note that when I apply a tracking of a sat, the centre freq updates on the main console for RX but NOT for TX (even though there is a TX freq in the sat definition).  I've attemted to click on the 'TX' option and 'arrow' in the 'Current' section but cannot get the freq to change in the TX window on the main SDRConsole.  I note when I click a 'Down' arrow a brief * is displayed in the RX window and freq updates.  This does not happen on the TX section.

Any ideas?

Thanks

Nigel
M0CRT


Re: V3's performance on two PCs with huge HF files - some observations

Simon Brown
 

Nils,

 

Which XML file?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

-----Original Message-----
From: Nils Schiffhauer <dk8ok@...>

Last, but not least, I unattendendly made a scheduled recording of a 25 MHz HF bandwith over 24 hours with the Desktop onto the external HD.

* recording withouth nagging, the WAV RF64 file resulted in 7.85TB

* fluent playing & fast jumping within this file (frequency and time)

* producing an XML file took 8h15m each

* after recalling the XML file: fast build-up of the spectrogram, fluently jumping in time and frequency by mouse clicking, perfect audio

 

If someone has any hint to accelerate the building of XML files even further, this would be highly welcomed!


Anan 8000DLE Transmit Audio

Al BOLTON - W8OC
 



I'm hoping someone using an Anan 8000 would be kind enough to share their transmit settings with me.  I had everything working but inadvertently made some changes after a Windows 10 update that fouled everything up.  Here's my problem, my transmit SSB signal is described as "rough" or distorted on voice peaks and I hear a "beep" through my speakers every time I engage my push to talk switch.  When this occurs, I also see a "blip" on my panadapter screen. I'm using a Heil dynamic microphone and have tried using and/or adjusting the boost settings in both the Mic and Transmit Options windows to no avail.  I'm sure I have some setting adjusted improperly, but can't seem to sort it out.  Any assistance would be greatly appreciated.  Thanks in advance!  Al W8OC


Re: #pluto #pluto

Siegfried Jackstien
 

GERN ... am besten gleich ...

dg9bfc sigi

Am 19.12.2019 um 13:13 schrieb Frank Schneider:

Hallo Simon,

 

That was it. Somehow, the tx offset in the converter definitions got lost in the process, and I didn’t notice.

Siggi, werde trotzdem mal anrufen

73

 

Frank

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown via Groups.Io
Sent: Thursday, December 19, 2019 09:33
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] #pluto

 

Hi,

 

Incorrect configuration. See: https://www.sdr-radio.com/Console/EsHail2

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of frank@...
Sent: 18 December 2019 09:02
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] #pluto

 

The spurious signals are only there with the latest console. Thes frequencies are fixed. They don't change. Never mind what the display …


Re: #pluto #pluto

Frank Schneider
 

Hallo Simon,

 

That was it. Somehow, the tx offset in the converter definitions got lost in the process, and I didn’t notice.

Siggi, werde trotzdem mal anrufen

73

 

Frank

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown via Groups.Io
Sent: Thursday, December 19, 2019 09:33
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] #pluto

 

Hi,

 

Incorrect configuration. See: https://www.sdr-radio.com/Console/EsHail2

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of frank@...
Sent: 18 December 2019 09:02
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] #pluto

 

The spurious signals are only there with the latest console. Thes frequencies are fixed. They don't change. Never mind what the display …


Elecraft K4

N2MS
 

Simon,

Any change you will be supporting the Elecraft K4 next year?

Mike N2MS


Re: Spectrum display freezes while tuning

Gregg Marco W6IZT <gregg.w6izt@...>
 

Yes

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of jdow
Sent: Thursday, December 19, 2019 11:01
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Spectrum display freezes while tuning

One other thing comes to mind - are you using the correct communications protocol for the K3?

{^_^}

On 20191218 17:20:59, Gregg Marco W6IZT wrote:


-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of
jdow
Sent: Wednesday, December 18, 2019 19:09
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Spectrum display freezes while tuning

So which of the several means of tuning frequencies did you use? Were you tuning the center frequency? If so by sliding the lowest frequency scale left or right or by clicking the keyboard next to that scale or using the menu? If not were you trying to change the tuned receiver frequency with the scroll wheel in the spectrum/waterfall or the numbers upper left on the main or matrix display?

**I tried tuning the K3, and using the mouse wheel on the displayed
frequency in SDR Console, both methods resulted in the same behavior.
If I turned off sync with the K3 the display did not freeze.
Increasing the poll time in omni rig seems to result in a marginal
improvement

There are a lot of ways to change frequencies. Simon will certainly need to know which one you used.

You might also want to check what the CPU load is.

** CPU utilization was in the 10-15% range

That said I don't think any of the methods I can think of at the moment normally cause the display to pause more than very briefly, which happens when the center frequency is changed and the front end frequency synthesizer must relock. Data continues to flow but it may appear like it is glitching at that time in my experience.

{^_^}

On 20191218 13:36:58, Gregg Marco W6IZT wrote:
Pic attached

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf
Of jdow
Sent: Wednesday, December 18, 2019 21:29
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Spectrum display freezes while tuning

Tuning which frequency and how?
Picture so your settings can be assessed?
{^_^}

On 20191218 13:22:18, Gregg Marco W6IZT wrote:
Is it expected behavior for the spectrum display to freeze while tuning?

Thank you in advance for your assistance.

73

Gregg W6IZT

*From:* gregg.w6izt@... <gregg.w6izt@...>
*Sent:* Wednesday, December 18, 2019 18:35
*To:* SDR-Radio@groups.io
*Subject:* RE: Question using SDR console as a pan adapter with K3

Group:

I was able to resolve # 1 and #3 by changing the protocol of the
DXLab Commander Secondary port from K3 to Kenwood TS-590.

73 HH

Gregg W6IZT

*From:* gregg.w6izt@... <mailto:gregg.w6izt@...>
<gregg.w6izt@... <mailto:gregg.w6izt@...>>
*Sent:* Wednesday, December 18, 2019 17:18
*To:* SDR-Radio@groups.io <mailto:SDR-Radio@groups.io>
*Subject:* Question using SDR console as a pan adapter with K3

Group:

I’m working through configuring SDR console v3 as a panadpater
display for use with a K3. The configuration is as follows:

SDR Console v3.0.17

Win 10 pro Intel I7 gen 8

SDR-IQ

DXLab with Omni-Rig connected to the secondary com port of DXLab
Commander using virtual com ports.

I’ve have run into a couple of issues that I have not been able to resolve:

1. When the K3 mode is set to Data A (USB) the SDR Console displays Data-L.
Using DXLab Commander to change radio mode to Data=L, SDR Console displays
Data-U
2. SDR Console will occasionally display the B VFO frequency of the K3, the
radio is not in split. DX Commander and my amp both display
VFO A properly 3. I’m unable to get the passband on the spectrum display to overlay the actual
passband correctly. I suspect that this is related to #1.

This is a great application!

Any assistance is greatly apricated.

73

Gregg W6IZT







Capture.JPG






Re: Spectrum display freezes while tuning

Gregg Marco W6IZT <gregg.w6izt@...>
 

I have eliminated the virtual serial ports by connecting Omni-Rig directly to the radios physical com port. No other apps pause. Spectravue works fine as does HDSDR

Gregg

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of jdow
Sent: Thursday, December 19, 2019 11:00
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Spectrum display freezes while tuning

Put altogether that might be enough for Simon to diagnose it. I don't know why that should cause a display pause. As a wild guess it sounds like something hung up spinning in a small loop looking for input in the communications process at a very high priority blocking everything else. If you have any other programs open do they stall for that same interval? You might want to try switching virtual serial port tools. I get good results with the free com0com tools.

{^_^}

On 20191218 17:20:59, Gregg Marco W6IZT wrote:


-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of
jdow
Sent: Wednesday, December 18, 2019 19:09
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Spectrum display freezes while tuning

So which of the several means of tuning frequencies did you use? Were you tuning the center frequency? If so by sliding the lowest frequency scale left or right or by clicking the keyboard next to that scale or using the menu? If not were you trying to change the tuned receiver frequency with the scroll wheel in the spectrum/waterfall or the numbers upper left on the main or matrix display?

**I tried tuning the K3, and using the mouse wheel on the displayed
frequency in SDR Console, both methods resulted in the same behavior.
If I turned off sync with the K3 the display did not freeze.
Increasing the poll time in omni rig seems to result in a marginal
improvement

There are a lot of ways to change frequencies. Simon will certainly need to know which one you used.

You might also want to check what the CPU load is.

** CPU utilization was in the 10-15% range

That said I don't think any of the methods I can think of at the moment normally cause the display to pause more than very briefly, which happens when the center frequency is changed and the front end frequency synthesizer must relock. Data continues to flow but it may appear like it is glitching at that time in my experience.

{^_^}

On 20191218 13:36:58, Gregg Marco W6IZT wrote:
Pic attached

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf
Of jdow
Sent: Wednesday, December 18, 2019 21:29
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Spectrum display freezes while tuning

Tuning which frequency and how?
Picture so your settings can be assessed?
{^_^}

On 20191218 13:22:18, Gregg Marco W6IZT wrote:
Is it expected behavior for the spectrum display to freeze while tuning?

Thank you in advance for your assistance.

73

Gregg W6IZT

*From:* gregg.w6izt@... <gregg.w6izt@...>
*Sent:* Wednesday, December 18, 2019 18:35
*To:* SDR-Radio@groups.io
*Subject:* RE: Question using SDR console as a pan adapter with K3

Group:

I was able to resolve # 1 and #3 by changing the protocol of the
DXLab Commander Secondary port from K3 to Kenwood TS-590.

73 HH

Gregg W6IZT

*From:* gregg.w6izt@... <mailto:gregg.w6izt@...>
<gregg.w6izt@... <mailto:gregg.w6izt@...>>
*Sent:* Wednesday, December 18, 2019 17:18
*To:* SDR-Radio@groups.io <mailto:SDR-Radio@groups.io>
*Subject:* Question using SDR console as a pan adapter with K3

Group:

I’m working through configuring SDR console v3 as a panadpater
display for use with a K3. The configuration is as follows:

SDR Console v3.0.17

Win 10 pro Intel I7 gen 8

SDR-IQ

DXLab with Omni-Rig connected to the secondary com port of DXLab
Commander using virtual com ports.

I’ve have run into a couple of issues that I have not been able to resolve:

1. When the K3 mode is set to Data A (USB) the SDR Console displays Data-L.
Using DXLab Commander to change radio mode to Data=L, SDR Console displays
Data-U
2. SDR Console will occasionally display the B VFO frequency of the K3, the
radio is not in split. DX Commander and my amp both display
VFO A properly 3. I’m unable to get the passband on the spectrum display to overlay the actual
passband correctly. I suspect that this is related to #1.

This is a great application!

Any assistance is greatly apricated.

73

Gregg W6IZT







Capture.JPG






Re: S-Meter

jdow
 

Have you tried the view menu signal meter settings?
{o.o}

On 20191218 18:39:50, mage estic wrote:
Some how it got turned off, hrmm is this the only way to get it back ?
IMG_20191217_153720113.jpg


Re: Spectrum display freezes while tuning

jdow
 

One other thing comes to mind - are you using the correct communications protocol for the K3?

{^_^}

On 20191218 17:20:59, Gregg Marco W6IZT wrote:
-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of jdow
Sent: Wednesday, December 18, 2019 19:09
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Spectrum display freezes while tuning
So which of the several means of tuning frequencies did you use? Were you tuning the center frequency? If so by sliding the lowest frequency scale left or right or by clicking the keyboard next to that scale or using the menu? If not were you trying to change the tuned receiver frequency with the scroll wheel in the spectrum/waterfall or the numbers upper left on the main or matrix display?
**I tried tuning the K3, and using the mouse wheel on the displayed frequency in SDR Console, both methods resulted in the same behavior. If I turned off sync with the K3 the display did not freeze. Increasing the poll time in omni rig seems to result in a marginal improvement
There are a lot of ways to change frequencies. Simon will certainly need to know which one you used.
You might also want to check what the CPU load is.
** CPU utilization was in the 10-15% range
That said I don't think any of the methods I can think of at the moment normally cause the display to pause more than very briefly, which happens when the center frequency is changed and the front end frequency synthesizer must relock. Data continues to flow but it may appear like it is glitching at that time in my experience.
{^_^}
On 20191218 13:36:58, Gregg Marco W6IZT wrote:
Pic attached

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of
jdow
Sent: Wednesday, December 18, 2019 21:29
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Spectrum display freezes while tuning

Tuning which frequency and how?
Picture so your settings can be assessed?
{^_^}

On 20191218 13:22:18, Gregg Marco W6IZT wrote:
Is it expected behavior for the spectrum display to freeze while tuning?

Thank you in advance for your assistance.

73

Gregg W6IZT

*From:* gregg.w6izt@... <gregg.w6izt@...>
*Sent:* Wednesday, December 18, 2019 18:35
*To:* SDR-Radio@groups.io
*Subject:* RE: Question using SDR console as a pan adapter with K3

Group:

I was able to resolve # 1 and #3 by changing the protocol of the
DXLab Commander Secondary port from K3 to Kenwood TS-590.

73 HH

Gregg W6IZT

*From:* gregg.w6izt@... <mailto:gregg.w6izt@...>
<gregg.w6izt@... <mailto:gregg.w6izt@...>>
*Sent:* Wednesday, December 18, 2019 17:18
*To:* SDR-Radio@groups.io <mailto:SDR-Radio@groups.io>
*Subject:* Question using SDR console as a pan adapter with K3

Group:

I’m working through configuring SDR console v3 as a panadpater
display for use with a K3. The configuration is as follows:

SDR Console v3.0.17

Win 10 pro Intel I7 gen 8

SDR-IQ

DXLab with Omni-Rig connected to the secondary com port of DXLab
Commander using virtual com ports.

I’ve have run into a couple of issues that I have not been able to resolve:

1. When the K3 mode is set to Data A (USB) the SDR Console displays Data-L.
Using DXLab Commander to change radio mode to Data=L, SDR Console displays
Data-U
2. SDR Console will occasionally display the B VFO frequency of the K3, the
radio is not in split. DX Commander and my amp both display VFO
A properly 3. I’m unable to get the passband on the spectrum display to overlay the actual
passband correctly. I suspect that this is related to #1.

This is a great application!

Any assistance is greatly apricated.

73

Gregg W6IZT







Capture.JPG


Re: Spectrum display freezes while tuning

jdow
 

Put altogether that might be enough for Simon to diagnose it. I don't know why that should cause a display pause. As a wild guess it sounds like something hung up spinning in a small loop looking for input in the communications process at a very high priority blocking everything else. If you have any other programs open do they stall for that same interval? You might want to try switching virtual serial port tools. I get good results with the free com0com tools.

{^_^}

On 20191218 17:20:59, Gregg Marco W6IZT wrote:
-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of jdow
Sent: Wednesday, December 18, 2019 19:09
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Spectrum display freezes while tuning
So which of the several means of tuning frequencies did you use? Were you tuning the center frequency? If so by sliding the lowest frequency scale left or right or by clicking the keyboard next to that scale or using the menu? If not were you trying to change the tuned receiver frequency with the scroll wheel in the spectrum/waterfall or the numbers upper left on the main or matrix display?
**I tried tuning the K3, and using the mouse wheel on the displayed frequency in SDR Console, both methods resulted in the same behavior. If I turned off sync with the K3 the display did not freeze. Increasing the poll time in omni rig seems to result in a marginal improvement
There are a lot of ways to change frequencies. Simon will certainly need to know which one you used.
You might also want to check what the CPU load is.
** CPU utilization was in the 10-15% range
That said I don't think any of the methods I can think of at the moment normally cause the display to pause more than very briefly, which happens when the center frequency is changed and the front end frequency synthesizer must relock. Data continues to flow but it may appear like it is glitching at that time in my experience.
{^_^}
On 20191218 13:36:58, Gregg Marco W6IZT wrote:
Pic attached

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of
jdow
Sent: Wednesday, December 18, 2019 21:29
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Spectrum display freezes while tuning

Tuning which frequency and how?
Picture so your settings can be assessed?
{^_^}

On 20191218 13:22:18, Gregg Marco W6IZT wrote:
Is it expected behavior for the spectrum display to freeze while tuning?

Thank you in advance for your assistance.

73

Gregg W6IZT

*From:* gregg.w6izt@... <gregg.w6izt@...>
*Sent:* Wednesday, December 18, 2019 18:35
*To:* SDR-Radio@groups.io
*Subject:* RE: Question using SDR console as a pan adapter with K3

Group:

I was able to resolve # 1 and #3 by changing the protocol of the
DXLab Commander Secondary port from K3 to Kenwood TS-590.

73 HH

Gregg W6IZT

*From:* gregg.w6izt@... <mailto:gregg.w6izt@...>
<gregg.w6izt@... <mailto:gregg.w6izt@...>>
*Sent:* Wednesday, December 18, 2019 17:18
*To:* SDR-Radio@groups.io <mailto:SDR-Radio@groups.io>
*Subject:* Question using SDR console as a pan adapter with K3

Group:

I’m working through configuring SDR console v3 as a panadpater
display for use with a K3. The configuration is as follows:

SDR Console v3.0.17

Win 10 pro Intel I7 gen 8

SDR-IQ

DXLab with Omni-Rig connected to the secondary com port of DXLab
Commander using virtual com ports.

I’ve have run into a couple of issues that I have not been able to resolve:

1. When the K3 mode is set to Data A (USB) the SDR Console displays Data-L.
Using DXLab Commander to change radio mode to Data=L, SDR Console displays
Data-U
2. SDR Console will occasionally display the B VFO frequency of the K3, the
radio is not in split. DX Commander and my amp both display VFO
A properly 3. I’m unable to get the passband on the spectrum display to overlay the actual
passband correctly. I suspect that this is related to #1.

This is a great application!

Any assistance is greatly apricated.

73

Gregg W6IZT







Capture.JPG


V3's performance on two PCs with huge HF files - some observations

Nils Schiffhauer
 

Hi - as there is some discussion about PC power, V3 and performance, I did some observations with two different PCs, performing the same tasks with V3:

Desktop: Intel i7-8700@3.2 GHz, GTX 1050 Ti [CUDA], 32 GB RAM, internal SSD 4TB (Samsung 860 EVO) & M.2 SSD (Samsung 970 EVO plus) 2 TB
Laptop: Intel i7-8550U@1,8 GHz, no CUDA [IPP], 16 GB RAM, 2 TB hard disk internal
ext. HD: WD MyBookDuo 20 TB
all with USB 3.1 & running with W10/Pro
Receiver: Winradio G65 SIGMA/16 bit

25 MHz HF bandwidth:
* live reception on both PCs fluently without hiccups
* recording one WAV RF64 file of 3h length (= 0.98TB) & playing on both PCs on internal and external HDs: fluently without hiccups. Fast jumping within recordings (by both frequency and time)

25 MHz HF bandwidth, producing XML (File Analyser) files from one WAV RF64 file of 3h length (= 0.98TB):
* Desktop on conventional SSD: 35m
* Desktop on fast SSB: 28m
* Desktop on external HDD: 61m
* Laptop on internal HDD: 2h36m
* Laptop on external HDD: 2h34m

Last, but not least, I unattendendly made a scheduled recording of a 25 MHz HF bandwith over 24 hours with the Desktop onto the external HD.
* recording withouth nagging, the WAV RF64 file resulted in 7.85TB
* fluent playing & fast jumping within this file (frequency and time)
* producing an XML file took 8h15m each
* after recalling the XML file: fast build-up of the spectrogram, fluently jumping in time and frequency by mouse clicking, perfect audio

If someone has any hint to accelerate the building of XML files even further, this would be highly welcomed!

All setups were used with one RX only which played its audio via VAC to three data decoders in parallel.
Decoding of even delicate signals (bad SNR, high data rate etc) was exccellent.

To do:
* test with 25 MHz HF bandwidth both live & file with up to 24 RX and up to 24 decoders (should work as judged from first trials)

I think, this combination of Hardware and Software really defines the State of the Art, outperforming most even professional setups.
Simon's Software is playing the pivotal role in this game. And it is the only part which is for free ...
If you don't need 20MHz+ HF bandwidth (plus the last mile of sensivity and dynamic range etc), the nearly 20 MHz of FDM-S3 (also 16 Bit) will do the job at a far lower price.

Simon - thank you very much for all what you did this year for "the community"! With it, we can push our hobby (and even someone's profession) to such a limit we never even dreamed of.

HNY & 73: Nils, DK8OK


--
dk8ok.org


Re: #pluto #pluto

Frank Schneider
 

Hallo Sigi,

Ist vielleicht besser, wenn ich das per Telefon zu erklaeren versuche. Falls du willst. Schicke mir deine Nummer an frank@...

Whatsup geht auch

 

73

 

Frank

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien via Groups.Io
Sent: Wednesday, December 18, 2019 19:43
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] #pluto

 

aehem ... how can it be that you do not receive your own transmission?? but have TWO frequencies where you really send??

something is puzzled there but i can not figure out what

about stability of usb connection ... yes ... do the ground mod (easiest is a short bridge from L7 to D3)

what gain and drive do you have set in menue??

and you say that you can change tx frequency (say with the mouse in numbers box) and the tx frequency plus its spurii stays fixed??

hmmm...

you use the pluto with external reference i guess??

did you check that the 40 megs HAVE TO BE SWITCHED ON when you start pluto?? maybe the frequency was not there ... tx calibration did not work ... and that may explain why there is a ghost signal ... and why tx qrg change does not work

but that is all just shooting in the dark ... NEVER have seen such a thing here

grreetz and good luck to find the fault

dg9bfc sigi

ps 3.0.18 is just before release (i guess) ...

Am 18.12.2019 um 13:35 schrieb Frank Schneider:

Hallo Sigi,

Vielen Dank fuer die Antwort,

 

Please explain for dummis: why must I engage the geo beacon? I don’t need it for frequency stability.

I use the Pluto for a few month now. Works fine with v3.0.15  No spurious. I put the curser over the signal I want to respond to and push the PTT. Works.

Only problem is the disconnects of the USB, in spite of the mods suggested to the grounding  in the Pluto. Aber das ist eine andere Geschichte.

Offset is off

Re the gain: That is what I mean with gain sensitivity being high.

With 3.0.15, Audio gain 60, compression 60, I need a drive setting of 75 to create a two tone signal 6dB below the beacon. No spurious.

With 3.0.17 the drive setting is 18,  the spurious are there and the tx output frequency is fixed, no matter what the tx frequency window says.

Am well aware about overdriving things. Maybe there is some default setting I have not discovered yet?

73

 

Frank

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien via Groups.Io
Sent: Wednesday, December 18, 2019 13:08
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] #pluto

 

you did not engage geo beacon (or why are you txing out of your own rx window?!?)

i use a pluto now for nearly a year (as long as qo100 is on air) ... and my pluto is ALWAYS txing fine (no spurii to be seen)

do you have tx offset switched on?!? (switch it off ... no need on qo100 for tx offset!!)

i see that you use a very low drive from the pluto (only 20%)... means you have a very high gain amp BEHIND the pluto towards antenna

that means that "ghost signals" or spurii that would normally not be seen ... are then still to be seen on the transponder

add attenuator behind pluto and use a bit higher drive with such a high gain amplifier (guessing you use a datv setup on nb transponder?!?)

best is drive area of 80 to 90 % (that gives cleanest signal here on my station) settings above 90 ... and the pluto is not so clean anymore ... (same as with all trx ... fullpower gives dirty signal)

with such a high gain behind the pluto you will see those ghost signals ... adding attenuator and using higher drive in pluto may solve that

greetz sigi dg9bfc

 

Am 18.12.2019 um 09:02 schrieb frank@...:

The spurious signals are only there with the latest console. Thes frequencies are fixed. They don't change. Never mind what the display says.


Re: #pluto #pluto

Simon Brown
 

Hi,

 

Incorrect configuration. See: https://www.sdr-radio.com/Console/EsHail2

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of frank@...
Sent: 18 December 2019 09:02
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] #pluto

 

The spurious signals are only there with the latest console. Thes frequencies are fixed. They don't change. Never mind what the display …


Re: Anan 10E TX problem??

Simon Brown
 

Yes,

 

Sadly it’s the firmware which Phil isn’t going to update I believe. I have to flip to TX quickly which then brings RX back to life.

 

I currently use the ANAN 10 which has a bigger FPGA and has the current Phase II firmware, works well.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of paul newcombe
Sent: 18 December 2019 22:46
To: SDR-Radio@groups.io
Subject: [SDR-Radio] Anan 10E TX problem??

 

Hi Group....

 

Just wondering if anyone else has run across this....

 

When TXing with the SDRC and the Anan 10e SDRC will not always go back to RX. It just locks up.

I can hear the relays in the Anan and in the amp switch back to RX but SDRC waterfall does not start again.

I have attached 4 screenshots.

 

Good RX  and Good TX. These are the baseline screenshots.

Bad TX  is what my TX screen looks like RIGHT before the radio does not switch back to RX.

Notice no power out on the meters. I am still getting power out and obviously tones out as I can see the power on my external power meter 

at the same level as it is when I have power out showing on the SDRC meter and hear the tones over the speaker.

As you can see I am using FT8 for this test.

Bad RX is what my SDRC screen looks like when it locks up directly after the Bad TX period.

The Bad RX period is ALWAYS proceeded by a Bad TX period.

 

If I double click on the big TX button it will start to RX again correctly.

This happens very often. Maybe 6 times in 1 hour.

I have my Anan plugged straight into the SDRC computer with no switch or router in line. Just static IPs. 

 

Thoughts on what I am doing wrong anyone?

 

I have 4 Anan 10Es in the shack so if needed I can swap the Anan's out to see if it is just on the one being used on HF or if it is on the other Anan 10Es being used on the other bands too.

 

Paul N2EME

 


Re: No audio after updating win 10 #sdrconsolev3

Simon Brown
 

I have an idea:

 

Don’t install every pre-release that appears. Also, SDR Console uses WASAPI, SDRuno uses other APIs.

 

What is the audio hardware you use?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Selwyn Warren
Sent: 18 December 2019 21:36
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] No audio after updating win 10 #sdrconsolev3

 

I am using SDR Console version 3.0.17  build 1686.   Every time I update win 10 OS pre-releases audio doesn't work.  It always involves the audio drivers. Uninstalling the audio drivers in Device Manager and restarting the PC some times fixes the problem.  Uninstalling the audio drivers and re-installing manually sometimes fixes the problem.  This time after the latest win 10 OS update last night nothing fixes it.  I have SDRuno installed on the same PC and have never had a problem with it.

Any ideas?

16101 - 16120 of 67991