|
Anan 10E TX problem??
paul newcombe <G6YZC@...>
Hi Group....
Just wondering if anyone else has run across this....
When TXing with the SDRC and the Anan 10e SDRC will not always go back to RX. It just locks up.
I can hear the relays in the Anan and in the amp switch back to RX but SDRC waterfall does not start again.
I have attached 4 screenshots.
Good RX and Good TX. These are the baseline screenshots.
Bad TX is what my TX screen looks like RIGHT before the radio does not switch back to RX.
Notice no power out on the meters. I am still getting power out and obviously tones out as I can see the power on my external power meter
at the same level as it is when I have power out showing on the SDRC meter and hear the tones over the speaker.
As you can see I am using FT8 for this test.
Bad RX is what my SDRC screen looks like when it locks up directly after the Bad TX period.
The Bad RX period is ALWAYS proceeded by a Bad TX period.
If I double click on the big TX button it will start to RX again correctly.
This happens very often. Maybe 6 times in 1 hour.
I have my Anan plugged straight into the SDRC computer with no switch or router in line. Just static IPs.
Thoughts on what I am doing wrong anyone?
I have 4 Anan 10Es in the shack so if needed I can swap the Anan's out to see if it is just on the one being used on HF or if it is on the other Anan 10Es being
used on the other bands too.
Paul N2EME
|
|
|
|
No audio after updating win 10
#sdrconsolev3
Selwyn Warren
I am using SDR Console version 3.0.17 build 1686. Every time I update win 10 OS pre-releases audio doesn't work. It always involves the audio drivers. Uninstalling the audio drivers in Device Manager and restarting the PC some times fixes the problem. Uninstalling the audio drivers and re-installing manually sometimes fixes the problem. This time after the latest win 10 OS update last night nothing fixes it. I have SDRuno installed on the same PC and have never had a problem with it.
Any ideas?
|
|
|
|
Re: Spectrum display freezes while tuning
Gregg Marco W6IZT <gregg.w6izt@...>
Pic attached
toggle quoted messageShow quoted text
-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of jdow Sent: Wednesday, December 18, 2019 21:29 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Spectrum display freezes while tuning Tuning which frequency and how? Picture so your settings can be assessed? {^_^} On 20191218 13:22:18, Gregg Marco W6IZT wrote: Is it expected behavior for the spectrum display to freeze while tuning?
|
|
|
|
Re: Spectrum display freezes while tuning
jdow
Tuning which frequency and how?
toggle quoted messageShow quoted text
Picture so your settings can be assessed? {^_^}
On 20191218 13:22:18, Gregg Marco W6IZT wrote:
Is it expected behavior for the spectrum display to freeze while tuning?
|
|
|
|
Spectrum display freezes while tuning
Gregg Marco W6IZT <gregg.w6izt@...>
Is it expected behavior for the spectrum display to freeze while tuning?
Thank you in advance for your assistance.
73 Gregg W6IZT
From: gregg.w6izt@... <gregg.w6izt@...>
Sent: Wednesday, December 18, 2019 18:35 To: SDR-Radio@groups.io Subject: RE: Question using SDR console as a pan adapter with K3
Group:
I was able to resolve # 1 and #3 by changing the protocol of the DXLab Commander Secondary port from K3 to Kenwood TS-590.
73 HH Gregg W6IZT
From: gregg.w6izt@... <gregg.w6izt@...>
Group:
I’m working through configuring SDR console v3 as a panadpater display for use with a K3. The configuration is as follows:
SDR Console v3.0.17 Win 10 pro Intel I7 gen 8 SDR-IQ DXLab with Omni-Rig connected to the secondary com port of DXLab Commander using virtual com ports.
I’ve have run into a couple of issues that I have not been able to resolve:
This is a great application!
Any assistance is greatly apricated.
73 Gregg W6IZT
|
|
|
|
Re: #pluto
#pluto
Siegfried Jackstien
aehem ... how can it be that you do not receive your own transmission?? but have TWO frequencies where you really send?? something is puzzled there but i can not figure out what about stability of usb connection ... yes ... do the ground mod (easiest is a short bridge from L7 to D3) what gain and drive do you have set in menue?? and you say that you can change tx frequency (say with the mouse in numbers box) and the tx frequency plus its spurii stays fixed?? hmmm... you use the pluto with external reference i guess?? did you check that the 40 megs HAVE TO BE SWITCHED ON when you
start pluto?? maybe the frequency was not there ... tx calibration
did not work ... and that may explain why there is a ghost signal
... and why tx qrg change does not work but that is all just shooting in the dark ... NEVER have seen such a thing here grreetz and good luck to find the fault dg9bfc sigi ps 3.0.18 is just before release (i guess) ... Am 18.12.2019 um 13:35 schrieb Frank
Schneider:
|
|
|
|
Re: Question using SDR console as a pan adapter with K3
Gregg Marco W6IZT <gregg.w6izt@...>
Group:
I was able to resolve # 1 and #3 by changing the protocol of the DXLab Commander Secondary port from K3 to Kenwood TS-590.
73 HH Gregg W6IZT
From: gregg.w6izt@... <gregg.w6izt@...>
Sent: Wednesday, December 18, 2019 17:18 To: SDR-Radio@groups.io Subject: Question using SDR console as a pan adapter with K3
Group:
I’m working through configuring SDR console v3 as a panadpater display for use with a K3. The configuration is as follows:
SDR Console v3.0.17 Win 10 pro Intel I7 gen 8 SDR-IQ DXLab with Omni-Rig connected to the secondary com port of DXLab Commander using virtual com ports.
I’ve have run into a couple of issues that I have not been able to resolve:
This is a great application!
Any assistance is greatly apricated.
73 Gregg W6IZT
|
|
|
|
Question using SDR console as a pan adapter with K3
Gregg Marco W6IZT <gregg.w6izt@...>
Group:
I’m working through configuring SDR console v3 as a panadpater display for use with a K3. The configuration is as follows:
SDR Console v3.0.17 Win 10 pro Intel I7 gen 8 SDR-IQ DXLab with Omni-Rig connected to the secondary com port of DXLab Commander using virtual com ports.
I’ve have run into a couple of issues that I have not been able to resolve:
This is a great application!
Any assistance is greatly apricated.
73 Gregg W6IZT
|
|
|
|
Re: #pluto
#pluto
Frank Schneider
Hallo Sigi, Vielen Dank fuer die Antwort,
Please explain for dummis: why must I engage the geo beacon? I don’t need it for frequency stability. I use the Pluto for a few month now. Works fine with v3.0.15 No spurious. I put the curser over the signal I want to respond to and push the PTT. Works. Only problem is the disconnects of the USB, in spite of the mods suggested to the grounding in the Pluto. Aber das ist eine andere Geschichte. Offset is off Re the gain: That is what I mean with gain sensitivity being high. With 3.0.15, Audio gain 60, compression 60, I need a drive setting of 75 to create a two tone signal 6dB below the beacon. No spurious. With 3.0.17 the drive setting is 18, the spurious are there and the tx output frequency is fixed, no matter what the tx frequency window says. Am well aware about overdriving things. Maybe there is some default setting I have not discovered yet? 73
Frank
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
On Behalf Of Siegfried Jackstien via Groups.Io
Sent: Wednesday, December 18, 2019 13:08 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] #pluto
you did not engage geo beacon (or why are you txing out of your own rx window?!?) i use a pluto now for nearly a year (as long as qo100 is on air) ... and my pluto is ALWAYS txing fine (no spurii to be seen) do you have tx offset switched on?!? (switch it off ... no need on qo100 for tx offset!!) i see that you use a very low drive from the pluto (only 20%)... means you have a very high gain amp BEHIND the pluto towards antenna that means that "ghost signals" or spurii that would normally not be seen ... are then still to be seen on the transponder add attenuator behind pluto and use a bit higher drive with such a high gain amplifier (guessing you use a datv setup on nb transponder?!?) best is drive area of 80 to 90 % (that gives cleanest signal here on my station) settings above 90 ... and the pluto is not so clean anymore ... (same as with all trx ... fullpower gives dirty signal) with such a high gain behind the pluto you will see those ghost signals ... adding attenuator and using higher drive in pluto may solve that greetz sigi dg9bfc
Am 18.12.2019 um 09:02 schrieb frank@...:
|
|
|
|
Re: #pluto
#pluto
Siegfried Jackstien
you did not engage geo beacon (or why are you txing out of your own rx window?!?) i use a pluto now for nearly a year (as long as qo100 is on air) ... and my pluto is ALWAYS txing fine (no spurii to be seen) do you have tx offset switched on?!? (switch it off ... no need on qo100 for tx offset!!) i see that you use a very low drive from the pluto (only 20%)... means you have a very high gain amp BEHIND the pluto towards antenna that means that "ghost signals" or spurii that would normally not be seen ... are then still to be seen on the transponder add attenuator behind pluto and use a bit higher drive with such a high gain amplifier (guessing you use a datv setup on nb transponder?!?) best is drive area of 80 to 90 % (that gives cleanest signal here on my station) settings above 90 ... and the pluto is not so clean anymore ... (same as with all trx ... fullpower gives dirty signal) with such a high gain behind the pluto you will see those ghost
signals ... adding attenuator and using higher drive in pluto may
solve that greetz sigi dg9bfc
Am 18.12.2019 um 09:02 schrieb
frank@...:
The spurious signals are only there with the latest console. Thes frequencies are fixed. They don't change. Never mind what the display says.
|
|
|
|
Re: S-Meter
|
|
|
|
Re: #pluto
#pluto
Frank Schneider
The spurious signals are only there with the latest console. Thes frequencies are fixed. They don't change. Never mind what the display says.
|
|
|
|
S-Meter
jody spurrell
How to toggle the S-Meter, somehow it's not displayed and I would like to get it back....
|
|
|
|
Re: #pluto
#pluto
Simon Brown
Hi,
Without screenshots…
Simon Brown, G4ELI https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of frank@...
Hi all Have installed the latest Console update. Am using Pluto. Rx everything is fine. Transmit works only on10489770.325 (downlink) At the same time there is a carrier on 10489744.175 It does not matter what tx frequency is selected. I tried another computer, re-booted Pluto. No change. The Tx Audio and gain settings are much more sensitive. Re-installing the software didn’t help. So I installed the Oct. version again and everything is fine. Am I missing something? Using Win10
|
|
|
|
#pluto
#pluto
Frank Schneider
Hi all
Have installed the latest Console update. Am using Pluto. Rx everything is fine. Transmit works only on10489770.325 (downlink) At the same time there is a carrier on 10489744.175 It does not matter what tx frequency is selected. I tried another computer, re-booted Pluto. No change. The Tx Audio and gain settings are much more sensitive. Re-installing the software didn’t help. So I installed the Oct. version again and everything is fine. Am I missing something? Using Win10
|
|
|
|
Re: TX Text
Siegfried Jackstien
1 hour 55 minutes and counting ... grin nice contact with you "last" evening hi hi yes 17 of d3c just began (or will it realy need two days?!?) greetz sigi dg9bfc
Am 16.12.2019 um 22:15 schrieb Simon
Brown:
|
|
|
|
Re: TX Text
Simon Brown
Taken me two days!
Should have taken two hours – well maybe a bit more, but not two days!
Simon Brown, G4ELI https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Kriss Kliegle
Very neat!
|
|
|
|
Re: TX Text
Very neat!
There's a SW BC'er that does that, I believe it was on WRMI, 9395 kHz. The Report of the Week I think it was, here's his schedule off his youtube video: https://www.youtube.com/watch?v=Zs3WSqFnl1A 73 Kriss KA1GJU
|
|
|
|
Re: TX Text
Mike Millen
|
|
|
|
TX Text
Simon Brown
Coming in 3.0.18, as seen on QO-100 this evening:
Simon Brown, G4ELI https://www.sdr-radio.com
|
|
|