Re: sdr console airspy r2
on4kvi_renauld
hi Simon,
tks for info. USB cables do not seem the cause. I tried different ones, same results. Screenshot will follow. tnx renauld on4kvi
|
|
Re: ELAD S3 - Impressive!
Paul <blaggard@...>
A new beta model or one of the few that have done the rounds over the last few years? OK, maybe it's not quite vapourware but what is it now, two and half years since the initial announcement and still no production model?
|
|
Re: sdr console airspy r2
@KD9LTQ Mistake... GQRX on debian
|
|
Re: Hermes-Lite TX pb
actually, no, that should not be filed under "cosmetics", it should be filed under "Human Factors".
toggle quoted messageShow quoted text
the software received a command and cannot carry it out because of internal status information. the unable to carry out command condition would otherwise be silent and unobserved. providing an indication of what would otherwise be a hidden status with real-time conflict is feedback for the operator. can even be as simple as the letters TX with the International "No" symbol superimposed :-P - 1y (base 39) -
On Mon, Nov 11, 2019 at 10:48 AM, Siegfried Jackstien wrote:
|
|
Re: Console sometimes freezes
#sdrplay
Zacharias Liangas
Mrs Simon 1) Lenovo V330 i5 8250 laptop with 2 sockets USB2 type A and two with omni type D The one USB2 socket (in the left of laptop )uses TripLite Uo23-006 cable with ferrite chokes to guide RSP1a The second USB2 socket (in the right part of laptop )connects via a Anker USB3 hub to a mouse and a keyboard In case there are any other problems I will replace the mouse with a bluetooth (2) an antenna 2x16m with 8 m leading cable and 10 m extension (UHF-SMA male) inside home connects to the RSP1a in the salon . The main cable with UHF plug is enough long for the R75 in my lab (3)Console SDR among programs were used from Mid-august and till now no problem was encountered during reception.
|
|
Re: Different radios for RX and TX?
Simon Brown
Ah,
toggle quoted messageShow quoted text
But he wants to use two different SDRs, one for TX, t'other for RX. Simon Brown, G4ELI https://www.sdr-radio.com
-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Paul Keller Sent: 12 November 2019 10:04 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Different radios for RX and TX? Yes, we can.... I'm using my IC-746 as transmitter for 2m FT8 via microham interface, fully controlled by CAT. The receiver is an AIRSPY. OK, I can't control the receiver by CAT, just manually but that's no problem in my case. 73's de Paul HB9AXA On 12.11.2019 07:49, Simon Brown wrote: You can't.
|
|
Re: sdr console airspy r2
Simon Brown
Hi,
May sound crazy – add a screenshot. Looks like you’re not getting the data over from the radio properly, I can only think it’s the USB cable / USB connectors?
Simon Brown, G4ELI https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of on4kvi_renauld
hello to the group,
|
|
Re: sdr console airspy r2
Karl Krogmann
You have it running on Debian?
--- Karl A. Krogmann KD9LTQ
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of on4kvi_renauld <renauld.halbardier@...>
Sent: Tuesday, November 12, 2019 6:22:31 AM To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: [SDR-Radio] sdr console airspy r2 hello to the group, I have sdrconsole running on different computers win10 and debian without any problem. I installed it on a 'new' PC, with a i5-2400/3.1ghz and the airspy R2 as device ; no problem. Waterfall shows as splatters and audio is distorded. USB drivers updated ; tried a new PCI usb controllers with a NEC chipset , same problem. Any idea ? Thanks renauld on4kvi
|
|
sdr console airspy r2
hello to the group,
I have sdrconsole running on different computers win10 without any problem. I installed it on a 'new' PC, with a i5-2400/3.1ghz and the airspy R2 as device ; no problem. Waterfall shows as splatters and audio is distorded. USB drivers updated ; tried a new PCI usb controllers with a NEC chipset , same problem. Any idea ? Thanks renauld on4kvi
|
|
Re: Different radios for RX and TX?
Yes, we can....
toggle quoted messageShow quoted text
I'm using my IC-746 as transmitter for 2m FT8 via microham interface, fully controlled by CAT. The receiver is an AIRSPY. OK, I can't control the receiver by CAT, just manually but that's no problem in my case. 73's de Paul HB9AXA
On 12.11.2019 07:49, Simon Brown wrote:
You can't.
|
|
Re: 3.0.16 Released
Robin Thompson
Worth trying - as it works for me and a local colleague who had the same issue.
Run SDRSharp in the background whilst using Console. As soon as SDRSharp is closed the stuttering comes back…..
Not suggesting any reasons as to why it helps, but I was on the verge of giving up on V3 as due to stuttering it was unusable. Running SDRplay V1 on a remote server several miles away - Microsoft Book i7 with V3.0.16
More info if desired
Robin G3TKF
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of g1zrn via Groups.Io
Stutter has returned both on LAN & WiF so I've pulled my receiver from the V3 server. :-(
|
|
Re: Geostationary beacon no waterfall with pluto or limemini but OK with SDRstick
Pedro M.J. Wyns (on Dell XPS)
Sigi, the beacon receives fine in the main waterfall, it is just the beacon waterfall window that stays black. As far as I know there are no separate settings for this one..
Switching from SDRstick to Lime initially it works but gives up after seconds.. Switching back to SDR stick it works again.
|
|
ELAD S3 - Impressive!
Simon Brown
New ELAD S3 is here at the G4ELI pigsty:
https://www.sdr-radio.com/Blog/PostId/85/elad-s3-its-here
Simon Brown, G4ELI https://www.sdr-radio.com
|
|
Re: Different radios for RX and TX?
Simon Brown
toggle quoted messageShow quoted text
-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Michael Renner Sent: 12 November 2019 06:36 To: SDR-Radio@groups.io Subject: [SDR-Radio] Different radios for RX and TX? Moin, what do I have to do to be able to use different devices (eg RTL2832 or an AirSpy server for RX, PlutoSDR for TX) in SDR console? My "Radio Definition" always applies to RX and TX :-( vy 73 de dd0ul -- |Michael Renner E-mail: dd0ul@darc.de | |JN58SC/JN26ED Twitter: dd0ul | |Germany/France Don't drink as root! ESC:wq
|
|
Different radios for RX and TX?
Moin,
what do I have to do to be able to use different devices (eg RTL2832 or an AirSpy server for RX, PlutoSDR for TX) in SDR console? My "Radio Definition" always applies to RX and TX :-( vy 73 de dd0ul -- |Michael Renner E-mail: dd0ul@darc.de | |JN58SC/JN26ED Twitter: dd0ul | |Germany/France Don't drink as root! ESC:wq
|
|
Re: Console sometimes freezes
#sdrplay
Simon Brown
Also,
See: the SDRplay page on my website: https://www.sdr-radio.com/Radios/SDRplay - Freeze is high up on the list.
Simon Brown, G4ELI https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Zacharias Liangas via Groups.Io
https://youtu.be/2hmpjXaA6MM
|
|
Re: Console sometimes freezes
#sdrplay
Simon Brown
Hi,
Just post a screenshot while it’s frozen please. This is usually a graphics or USB power issue, as you are using a USB SDR I suggest it’s a lack of USB power.
https://www.sdr-radio.com/Support/USB
Simon Brown, G4ELI https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Zacharias Liangas via Groups.Io
https://youtu.be/2hmpjXaA6MM
|
|
Re: From OP: Re CONSOLE On A Mac, Sorta (a bit more)
Dennis Matzen
The HDMI dummy plug arrived today and it works great. I can now select the resolution of my local monitor so the remote session is full screen.
Thanks again for the suggestion...
|
|
Re: 3.0.16 Released
g1zrn@...
Stutter has returned both on LAN & WiF so I've pulled my receiver from the V3 server. :-(
Mike G1ZRN.
|
|
Re: Console sometimes freezes
#sdrplay
yes but it can't then restart so i need to stop rerun Console and f i play with the BW/MOD buttons the problem again happens
|
|