Date   

Thetis and new firmware re Anan 10EE

Jim Bentley
 

Hi Guys

          This must have been posted before but I cant find it, is the new firmware and Thetis available to

be downloaded for the Anan 10E or EE yet, thanks for taking the time to read this.


73's Jim G4JIX    


Re: SDR Console Version 2 License

Herb Keaton
 

Simon:
Thanks very much for the efforts and posting 2.3 build 2754. I uninstalled previous version and did the normal install as posted to Dropbox. Everything seemed to go in smoothly, no issues. Omnirig was unaffected as I still have it tracking the radio and both directions as before. Much to my surprise, the memories remained in tact. Trying to figure that out.

The crashes are still occurring whether I change frequency in VFO A or B or on the radio. Crossing that 12,000.00 MHZ barrier crashes the audio. The external radio setting still tracks properly. If I stop the radio and select in again, it picks up and takes off as previously. It seems to move without issue below 12 MHZ.

I will work on it this weekend, perhaps I need to look at my SDR RSP1 panadapter configuration. 
Herb


Re: Pluto

Siegfried Jackstien
 

makes sense

uhf and above

70cm

23cm

13cm

9cm

makes 4 hambands

plus

1090megs (air-planes)

1.5 gig (inmarsat)

etc etc

i would use an upconverter (400 megs clock) for all bands below 300 megs

dg9bfc sigi

ps i would like to have a tv receiver app (analog AND digital tv) for it


Am 10.02.2017 um 23:09 schrieb Henk van Roon vanroonhenk@... [sdr-radio-com]:

 

FROM from 325 to 3800 MHz, MAKES NO SENce to me


Op 10-2-2017 om 23:30 schreef MV Elttba altectogo@... [sdr-radio-com]:
 
looks like a toy

Vincent



Re: Pluto

Bernard Malet
 

Dear Simon,

Before this new purchase of PLUTO, Simon, it is necessary to bring out the limeSDR of the cardboard that you put in the bottom of the cupboard and to continue to optimize your superb software ConsoleV3 to make live greatly the LimeSDR


Maybe "DONALDSDR", will also come out soon (He too has two big ears), It's funnier to listen to!

How much Euro, did you have to pay in Taxes to recover your LimeSDR?

Do not forget to heat the soldering iron to remove this awful reel since the V1.4 is at home. There are surely other components to be modified again for an optimization at 100 KHz

See the Topic of Marty, KNOCK: "Happy days are here again - LimeSDR lives in HF!"
Https://discourse.myriadrf.org/t/happy-days-are-here-again-limesdr-lives-in-hf/725

 

Very happy to have contributed for me to make move the manufacturer.
See Topic "Where did the 100 KHz go? "
Https://discourse.myriadrf.org/t/where-did-the-100-khz-go/690/102


Good readings at all
Very good weekend

73 Bernard


Re: Pluto

Simon Brown
 

Ah,

 

On the website I see: Ship Date Estimate 4/16/2017 (April 16th, 2017).

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 10 February 2017 21:34
To: sdr-radio-com@...
Subject: [sdr-radio-com] Pluto

 

 

Here’s yet another SDR!

 

http://www.digikey.com/products/en?keywords=pluto

 

Simon Brown, G4ELI
http://sdr-radio.com

 


Re: Pluto

Simon Brown
 

Hi,

 

As far as I can tell it’s in a beta phase but will have a Windows API. Being the fool I am I’ll buy one and add support. It the same chip Ettus use in the B200.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 11 February 2017 03:41
To: sdr-radio-com@...
Subject: Re: [sdr-radio-com] Re: Pluto

 

 

It's not clear from the Digikey data sheet as to what software is usable with this radio. 

Can anyone add anything in this regard?It does appear to, be a reasonable price for a full duplex receiver and transmitter.  The freq. coverage is decidedly vhf and above but it is reasonably priced.


Re: Pluto

doug
 



On 02/10/2017 10:40 PM, woodla@... [sdr-radio-com] wrote:
 

It's not clear from the Digikey data sheet as to what software is usable with this radio. 

Can anyone add anything in this regard?It does appear to, be a reasonable price for a full duplex receiver and transmitter.  The freq. coverage is decidedly vhf and above but it is reasonably priced.

Posted by: woodla@...









Somehow I did not see the beginning of this thread. What radio are you folks talking about, what does it do, and where could I get it if I wanted it?

--doug


Re: Pluto

Alan Woodman
 

It's not clear from the Digikey data sheet as to what software is usable with this radio. 
Can anyone add anything in this regard?It does appear to, be a reasonable price for a full duplex receiver and transmitter.  The freq. coverage is decidedly vhf and above but it is reasonably priced.


Re: Pluto

singleshare
 

Looks like the radio itself $94 is cheaper than the chip it's built around - AD9363 $115.00.

I think that's pretty darn cheap for a RX/TX unit with that frequency range.


Re: Pluto

Henk van Roon <vanroonhenk@...>
 

FROM from 325 to 3800 MHz, MAKES NO SENce to me


Op 10-2-2017 om 23:30 schreef MV Elttba altectogo@... [sdr-radio-com]:

 
looks like a toy

Vincent


Re: Pluto

vincent
 

looks like a toy

Vincent


Pluto

Simon Brown
 

Here’s yet another SDR!

 

http://www.digikey.com/products/en?keywords=pluto

 

Simon Brown, G4ELI
http://sdr-radio.com

 


Re: I/Q Canceling Error ?

Joe Puma <theprogramllc@...>
 

Simon added a nice snapshot feature in the program to take screen shots of the program. I overlooked it when I was a new user. 


Sent from my iPhone

On Feb 10, 2017, at 11:55 AM, 'Simon Brown' simon@... [sdr-radio-com] <sdr-radio-com@...> wrote:

 

L

 

Only half a screenshot. Can’t see the radio, bandwidth, settings etc.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 10 February 2017 15:23
To: sdr-radio-com@...
Subject: [sdr-radio-com] Re: I/Q Canceling Error ?

 

 

Am I the only one that is being driven nuts by this I/Q error?  It seems much better on SDR#


Re: Anan 10E and SDRConsole

paul newcombe <G6YZC@...>
 

Thank you Simon,


I too was wondering the same as when I have googled Thetis the pickings were slim.


I guess I need to look for some links to the new firmware and also versions of PWRSDR that are called Thetis as I really would like to run both SDRC and PWRSDR  rather than one or the other. 


Paul

N2EME




From: sdr-radio-com@... on behalf of 'Simon Brown' simon@... [sdr-radio-com]
Sent: Friday, February 10, 2017 11:53 AM
To: sdr-radio-com@...
Subject: RE: [sdr-radio-com] Re: Anan 10E and SDRConsole
 
 

Jim,

 

I have the very latest firmware and it works well, this is the new API which works with Thetis (new name for PowerSDR) and my own software. I don’t know about cuSDR.

 

If you want to play with the 10EE then shout at me off-list, a can do some hand-holding via SKYPE then you’re off.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 10 February 2017 14:15
To: sdr-radio-com@...
Subject: [sdr-radio-com] Re: Anan 10E and SDRConsole

 

 

Hi Barry,

         I have an Anan 10EE which I believe is a 10E with an added E hi but the question is the same, from your

reply I need to upload the Thetis firmware to my box, will it still work with  the likes of PowerSDR and CuSDR ?

as well as wspr ? from your previous answer I assume that it will, but I've been caught out with assumption's before hi not a nice thing to happen, thanks for your time.

 

73's Jim G4JIX.


Re: Anan 10E and SDRConsole

Mario Illgen <dl3lsm@...>
 

Hi Jim,

if you upload the new firmware (for Thetis) on your ANAN-10E(E) it will only work with Thetis and Simons software (and piHPSDR). It will not work with the existing versions of PowerSDR and cuSDR.. The new firmware and Thetis are still in beta testing and not released to the general user base..

73, Mario DL3LSM


2017-02-10 15:14 GMT+01:00 bentley.jim@... [sdr-radio-com] <sdr-radio-com@...>:

 

Hi Barry,
         I have an Anan 10EE which I believe is a 10E with an added E hi but the question is the same, from your
reply I need to upload the Thetis firmware to my box, will it still work with  the likes of PowerSDR and CuSDR ?
as well as wspr ? from your previous answer I assume that it will, but I've been caught out with assumption's before hi not a nice thing to happen, thanks for your time.

73's Jim G4JIX.



Re: I/Q Canceling Error ?

Simon Brown
 

L

 

Only half a screenshot. Can’t see the radio, bandwidth, settings etc.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 10 February 2017 15:23
To: sdr-radio-com@...
Subject: [sdr-radio-com] Re: I/Q Canceling Error ?

 

 

Am I the only one that is being driven nuts by this I/Q error?  It seems much better on SDR#


Re: Anan 10E and SDRConsole

Simon Brown
 

Jim,

 

I have the very latest firmware and it works well, this is the new API which works with Thetis (new name for PowerSDR) and my own software. I don’t know about cuSDR.

 

If you want to play with the 10EE then shout at me off-list, a can do some hand-holding via SKYPE then you’re off.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 10 February 2017 14:15
To: sdr-radio-com@...
Subject: [sdr-radio-com] Re: Anan 10E and SDRConsole

 

 

Hi Barry,

         I have an Anan 10EE which I believe is a 10E with an added E hi but the question is the same, from your

reply I need to upload the Thetis firmware to my box, will it still work with  the likes of PowerSDR and CuSDR ?

as well as wspr ? from your previous answer I assume that it will, but I've been caught out with assumption's before hi not a nice thing to happen, thanks for your time.

 

73's Jim G4JIX.


Re: I/Q Canceling Error ?

James Brown
 

Am I the only one that is being driven nuts by this I/Q error?  It seems much better on SDR#


Re: Anan 10E and SDRConsole

Jim Bentley
 

Hi Barry,
         I have an Anan 10EE which I believe is a 10E with an added E hi but the question is the same, from your
reply I need to upload the Thetis firmware to my box, will it still work with  the likes of PowerSDR and CuSDR ?
as well as wspr ? from your previous answer I assume that it will, but I've been caught out with assumption's before hi not a nice thing to happen, thanks for your time.

73's Jim G4JIX.


Re: Re-order receivers?

John Aldridge
 

That would be great... I don't care about the RX 'numbers', just about
the order in which they appear in the ribbon.

--
Cheers,
John

On 10-Feb-17 07:24, 'Simon Brown' simon@... [sdr-radio-com] wrote:


John,



Shouldn’t be a big problem, re-ordering would also shuffle out any
unused receivers, for example if you have RX1 … RX5 then close RX 3 and
re-order then you have RX1, RX2, RX3, RX4.



Simon Brown, G4ELI
http://sdr-radio.com



*From:*sdr-radio-com@... [mailto:sdr-radio-com@...]
*Sent:* 09 February 2017 20:06
*To:* sdr-radio-com@...
*Subject:* [sdr-radio-com] Re-order receivers?





Hi, all,

If I have several receivers open, is there any way to re-order them
(possibly, but *not* necessarily, into frequency order).

I'd be happy with either being able to do this directly from the
'Receive' tab or, having saved the set as a Favourite, within that
Favourite entry.

(I found the sort-by-frequency button on the Favourites/Organise dialog,
but that only seems to allow re-ordering favourite entries, not saved
receivers within a single favourite).

--
Cheers,
John