1. posterid:391786
  2. Can the SDR device be part of the recordings list ?

Re: Can the SDR device be part of the recordings list ?

jdow
 

If there are two AirSpies consider differentiating them. And do remember a new block of data name FOOB can be inserted and by definition must be ignored and preserved by software using the file that does not understand what FOOB data might be. Since the block includes the "FOOB" identifier and a block size ignoring it is easy. (Thank Electronics Arts for the basic format.)


{^_-}

On 20220727 08:01:17, Simon Brown wrote:

There you go. You see the device name in one of these fields. This is the WAV file Info block.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of jdow via groups.io <jdow@...>
Sent: 27 July 2022 15:42
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Can the SDR device be part of the recordings list ?
 

Inline attachment syndrome here. Can't read it.

{o.o}

On 20220727 07:22:21, Simon Brown wrote:
Ben,

This info is shown in the Windows File Explorer, for example:


From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Ben Z en de rest via groups.io <hoofdeigenwijs@...>
Sent: 27 July 2022 13:42
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: [SDR-Radio] Can the SDR device be part of the recordings list ?
 
Hi,
I am playing with 2 instances of SDRConsole v 3.2 (latest Beta).
One runs an RTL-SDR (by TCP) at 2.048 Mhz and the other one runs an SDRPlay RSP2 at 2.048 MHz.

Both have recorded an hour from the satellite band around the ISS pass to try to catch some SSTV from the university satellites. 

On both the instances I run Data File Analyzer after the recording to easily "hop" between the satellite transmissions (start play from the analyzer window and use the cross hair)

But when opening the recorded file for analyzing there is no sign which recording was made with wich SDR device, both started at the same time, have same duration and sample rate. 

Would it be possible to show the SDR device in the overview of recordings ?

For now I enabled weak signal for the RTL device, making the recording 3 times the size of the recording from the RSP2 so I can see which recording is from which device so I have a workaround ;-)

Thanks,

Ben - PE2BZ

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

Windows Explorer.jpg

Join main@SDR-Radio.groups.io to automatically receive all group messages.