1. Messages
  2. Continuum mode

Re: Continuum mode

Simon Brown
 

So,

 

Given:

  • Center frequency & bandwidth è Count of FFT bins = X (values in dBm)
  • Resolution bandwidth = Y Hz

 

What’s the formula for the actual continuum value when these X bins are used?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Conrad, PA5Y
Sent: 17 March 2022 09:49
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Continuum mode

 

Hello Simon, I really appreciate you adding this feature. I do have SpectraVue and an SDR-IP and in the past like Charles I used SDRC with Perseus and the IQ outputs as inputs for SpectraVue. Very cumbersome!

 

Let’s get it working and then I have some other ideas.

 

This will be really useful.

 

73

 

Conrad PA5Y

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown via groups.io
Sent: 15 March 2022 06:42
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Continuum mode

 

Hi,

 

That’s fine. I can get almost all work done, then there’s fine tuning. I think a docking window like the Signal History is the correct solution.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of sm6fhz
Sent: 14 March 2022 21:48
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Continuum mode

 

Hi.
Here is an early message (May 2014) with an tentative short-spec for the Continuum Mode:
https://sdr-radio.groups.io/g/main/message/23048
73 / Ingolf, SM6FHZ


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
Join main@SDR-Radio.groups.io to automatically receive all group messages.