Re: Open HPSDR Hermes (14 bit ADC, EP3C25) Transceiver Card


jdow
 

Actually thin. Maybe I need to take up coffee.
{O,o}

On 20220221 14:33:53, jdow wrote:
Er thick not think. Just got up.
{O.O}

On 20220221 05:10:24, Simon Brown wrote:

Hole cutter…

 

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown
Sent: 21 February 2022 13:08
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Open HPSDR Hermes (14 bit ADC, EP3C25) Transceiver Card

 

Yes it was.

 

I have used both the 10E (14 bit) and 10 (16 bit). What I don’t like is lack of cooling in these designs, so I will put in a diecast box, add heatsinks and somehow cut a hole on the top for a quiet fan.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Conrad, PA5Y
Sent: 21 February 2022 12:54
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Open HPSDR Hermes (14 bit ADC, EP3C25) Transceiver Card

 

Hi Simon, can you confirm that this was with an ANAN-10E? The 14 bit device?

 

Conrad

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown via groups.io
Sent: 21 February 2022 12:53
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Open HPSDR Hermes (14 bit ADC, EP3C25) Transceiver Card

 

I have only used V2.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Conrad, PA5Y
Sent: 21 February 2022 10:22
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Open HPSDR Hermes (14 bit ADC, EP3C25) Transceiver Card

 

Hello Simon. Did you say that you had an ANAN—10E? This is the 14bit version I think? In which case there must be a usable V2 firmware available for the 14 bit device, I would like to use it with SDRC.

 

Regards

 

Conrad PA5Y

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown via groups.io
Sent: 19 February 2022 20:08
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Open HPSDR Hermes (14 bit ADC, EP3C25) Transceiver Card

 

Hi,

 

From memory you don’t need to change the firmware to change the port number.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of sm6fhz
Sent: 19 February 2022 17:08
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Open HPSDR Hermes (14 bit ADC, EP3C25) Transceiver Card

 

Larry, I asked this question on the openHPSDR reflector and got the answer from George, K9TRV:

Port number: 1024
And you probably have to change the FW in order to change it.

That is fine with me, and i will confirm it by your method when the board arrives in late March - early April.

73 / Ingolf


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Join main@SDR-Radio.groups.io to automatically receive all group messages.