Re: Bricked my Ettus X310


Charly DF5VAE
 

Hello Eric,
What image did you install - an older one from UHD revision 3.5?

As I am not really familiar with software at all, I had a lot of difficulties in the beginning to properly use the UHD commands, but once I got a familiar (try & error) I could properly flash the firmware with Win7/64 only using the UHD commands.

The UHD start was messy - errors about missing LIBUSB file - finally I copied a set of files from a LIbusb 64 package into the (program Files/UHD/bin folder).

The UHD probe command failed here as well !
However the probbe command works if you add the right IP address of your URSP device.
I can ping my x310 on the 1G Lan connection 192.16.10.2 and on the 10G fiber connection 192.168.40.2. (I started using the HG image) , but now I managed to setup the Fiber connection as well.
Using an XG image, the 2nd 10G port would be (default) 192.168.30.2

I have not yet found a way to change the IP of the x310 - if I understood a posting from Ray, he modified the IP (for SDR console).
Simon has integrated some UDH files in SDR console to find the N200 etc , but it looks like he has never updated the old old files (UHD 3.15 version)

The USRP N200 is recognised by SDR console without difficulties - and the settings of the last beta version allow for 40MHz band with if the PC can handle the data flow.
The x310 send a message ~ all 15 sec on the 1G and 10G port , but SDR console seems not to listen on their default IP.


May be it helps, try your probe command as following

C:\Program Files\UHD4_1\bin>uhd_usrp_probe --args addr=192.168.40.2 (10 G Fiber) use 192.168.10.2 for copper connection

[INFO] [UHD] Win32; Microsoft Visual C++ version 1925; Boost_107000; UHD_4.1.0.5
-release
[INFO] [X300] X300 initialization sequence...
[INFO] [X300] Maximum frame size: 8000 bytes.
[INFO] [X300] Radio 1x clock: 200 MHz
_____________________________________________________
/
| Device: X-Series Device
| _____________________________________________________
| /
| | Mboard: X310
| | revision: 4
| | product: 30410
| | mac-addr0: 00:80:2f:0a:e9:f7
| | mac-addr1: 00:80:2f:0a:e9:f8
| | gateway: 192.168.10.1
| | ip-addr0: 192.168.10.2
| | subnet0: 255.255.255.0
| | ip-addr1: 192.168.20.2
| | subnet1: 255.255.255.0
| | ip-addr2: 192.168.30.2
| | subnet2: 255.255.255.0
| | ip-addr3: 192.168.40.2
| | subnet3: 255.255.255.0
| | serial: F4C00F
| | FW Version: 6.0
| | FPGA Version: 38.0
| | FPGA git hash: be53058
| |
| | Time sources: internal, external, gpsdo
| | Clock sources: internal, external, gpsdo
| | Sensors: ref_locked
| _____________________________________________________
| /
| | RFNoC blocks on this device:
| |
| | * 0/DDC#0
| | * 0/DDC#1
| | * 0/DUC#0
| | * 0/DUC#1
| | * 0/Radio#0
| | * 0/Radio#1
| | * 0/Replay#0
| _____________________________________________________
| /
| | Static connections on this device:
| |
| | * 0/SEP#0:0==>0/DUC#0:0
| | * 0/DUC#0:0==>0/Radio#0:0
| | * 0/Radio#0:0==>0/DDC#0:0
| | * 0/DDC#0:0==>0/SEP#0:0
| | * 0/Radio#0:1==>0/DDC#0:1
| | * 0/DDC#0:1==>0/SEP#1:0
| | * 0/SEP#2:0==>0/DUC#1:0
| | * 0/DUC#1:0==>0/Radio#1:0
| | * 0/Radio#1:0==>0/DDC#1:0
| | * 0/DDC#1:0==>0/SEP#2:0
| | * 0/Radio#1:1==>0/DDC#1:1
| | * 0/DDC#1:1==>0/SEP#3:0
| | * 0/SEP#4:0==>0/Replay#0:0
| | * 0/Replay#0:0==>0/SEP#4:0
| | * 0/SEP#5:0==>0/Replay#0:1
| | * 0/Replay#0:1==>0/SEP#5:0
| _____________________________________________________
| /
| | TX Dboard: 0/Radio#0
| | ID: UBX-160 v1 (0x0079)
| | Serial: 30C6978
| | _____________________________________________________
| | /
| | | TX Frontend: 0
| | | Name: UBX TX
| | | Antennas: TX/RX, CAL
| | | Sensors: lo_locked
| | | Freq range: 10.000 to 6000.000 MHz
| | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB
| | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz
| | | Connection Type: QI
| | | Uses LO offset: No
| _____________________________________________________
| /
| | RX Dboard: 0/Radio#0
| | ID: UBX-160 v1 (0x007a)
| | Serial: 30C6978
| | _____________________________________________________
| | /
| | | RX Frontend: 0
| | | Name: UBX RX
| | | Antennas: TX/RX, RX2, CAL
| | | Sensors: lo_locked
| | | Freq range: 10.000 to 6000.000 MHz
| | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB
| | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz
| | | Connection Type: IQ
| | | Uses LO offset: No
| _____________________________________________________
| /
| | TX Dboard: 0/Radio#1
| | _____________________________________________________
| | /
| | | TX Frontend: 0
| | | Name: Unknown (0xffff) - 0
| | | Antennas:
| | | Sensors:
| | | Freq range: 0.000 to 0.000 MHz
| | | Gain Elements: None
| | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz
| | | Connection Type: IQ
| | | Uses LO offset: No
| _____________________________________________________
| /
| | RX Dboard: 0/Radio#1
| | _____________________________________________________
| | /
| | | RX Frontend: 0
| | | Name: Unknown (0xffff) - 0
| | | Antennas:
| | | Sensors:
| | | Freq range: 0.000 to 0.000 MHz
| | | Gain Elements: None
| | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz
| | | Connection Type: IQ
| | | Uses LO offset: No

C:\Program Files\UHD4_1\bin>

Join main@SDR-Radio.groups.io to automatically receive all group messages.