Re: Console Signal meter reading


Conrad, PA5Y
 

Hello Simon, I would certainly welcome the ability to calibrate the S-meter on a single tone for each of my transverter set-ups. I use a Perseus, LAN IP and occasionally a Afedri-AFE822x.

Regards

Conrad PA5Y

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown via groups.io
Sent: 27 January 2022 22:00
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Console Signal meter reading

DUO is very probably not seeing the same signal level as the 3000.

I do agree that a per-radio signal calibration is needed.

Simon Brown, G4ELI
https://www.sdr-radio.com

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Mag loop Simon
Sent: 27 January 2022 20:50
To: main@sdr-radio.groups.io
Subject: Re: [SDR-Radio] Console Signal meter reading

Hi again

Thinking about this..I wonder if the duo with sdrc is “ not seeing “ what the 3000 is..ie duo is “ seeing “ the whole rx spectrum and hence not adjusting its signal level when the phaser is in operation? Sorry for poor explanation, but qro amps, antennas etc are my thing..still much to learn about sdr’s..

I do use antenna out to drive the duo, maybe i should use if out( with suitable if offset settings on sdrc)

Ps the Cornwall 160-40m special amp is coming along nicely..

Re s meter on sdrc vs 3000.. s1 on 3000= s3.5 on sdrc…s5 on 3000 =s4 on sdrc, would be nice to be able to adjust s meter or linearity on spectrum to match.


Thanks Other Simon








--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

Join main@SDR-Radio.groups.io to automatically receive all group messages.