Re: Pluto:: Spurious Emissions
Simon Brown
And,
Fixed but I do see a couple of other issues to look at later today.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown
Sent: 17 January 2022 10:30 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Pluto:: Spurious Emissions
Sigi,
There’s a bug in my code…
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien
just made a quick and dirty test ... set rx to 10489.700 and let it there (switched of "sync") then sent a tune tone 500 kc higher and 1000kc higher (nothing could be seen on transponder!!) the did the same downwards (yes i know i was txing outside band!!) if there would be spurious signal plus minus 500 kc or 1000 kc i sure would have seen them (i was txing with 20w in a sixfooter!!) so ... i think its a different thing he sees on his station ... the pluto is clean (normally) so lets ask some questions ... any switcher used to power a predriver?? (switching psu frequency may mix up with the real frequency) or is it possible that you used an external reference on your pluto that is not clean (that also may cause unwanted signals) tx boost engaged?? no ... do not used it!! ... using higher power of the pluto sends out higher spurious signals so using tx boost does not clean up your signal better use lower power setting (drive 80 to 90 maximum) and add an lna dg9bfc sigi Am 17.01.2022 um 08:39 schrieb Simon Brown:
- + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. -- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
|