toggle quoted messageShow quoted text
That makes sense ... many thanks.
I have a box full of 750mm telescopic aerials so this was a very
cheap starting point ;-)
On 22/12/2021 13:50, D R via groups.io
A lot of Daves on here giving advice!
The reflectors on the illustrated V antenna are simply forming a
ground plane, and they should NOT be connected to the feedline.
Ideally, they should be connected to each other where they cross,
or at least make each pair of opposites from a single length of
wire/rod/tube. Some experimentation with the distance between the
V and the ground plane may be necessary, as this will affect the
sensitivity at low elevations (with a standard turnstile antenna
the best spacing is around 3/8 wavelength, but it may be different
with a V).
As David Taylor says, a QFH antenna is the preferred modern
antenna for WxSat reception, but if you are just starting out the
V will be a lot simpler to make, and you can trade up later. Have