1. Messages
  2. To the user of my Superstation Servers who has an IP address from Scranton, KS…

Re: To the user of my Superstation Servers who has an IP address from Scranton, KS…

Robin Thompson
 

Unfortunately I have recently found AnyDesk doing exactly that !

Timed access (15secs before connect) which is not good but better than some of the alternatives . Teamviewer was the worst for doing that – I wouldn’t mind paying a small monthly fee but not nearly £300 p/year – AND they would not listen to any calls/emails which at least AnyDesk does, and fingers crossed they are being very helpful… !

 

73

Robin

G3TKF

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Jim Smith G0OFE
Sent: 01 October 2021 14:50
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] To the user of my Superstation Servers who has an IP address from Scranton, KS…

 

Try Anydesk. Does pretty much the same, but doesn't shithouse you with alleged commercial use.

I gave up with Teamviewer a couple of years ago due to this.

================================
Need help with SDR Console? If you have a problem:
Go to https://www.sdr-radio.com/support
Please follow instructions in that link.
===================================
Jim, Bournemouth, Dorset. IO90BR.
Elad FDM-S2, Airspy HF+, SDRPlay and Funcube Dongle SDR Recievers
8-element OP-DES for Band 2, 8-element LFA for 2m, 3-element LFA for 6m, 20m Windom for HF,. Wellbrook 1530 Loop for LF

On 01/10/2021 13:16, Kriss Kliegle KA1GJU wrote:

I'd ;like to update the ones that running old firmware, but SDRSharp puts me in a loop asking me to install  " .NET".  Which I did, but still asks for .NET to be installed when attempting to run SDRSharp. (Sigh)

Thanks to TeamViewer thinking I'm a commercial user, I now have to go to each site and repair the damage done by this user!

73 Kriss KA1GJU

Join {main@SDR-Radio.groups.io to automatically receive all group messages.