Re: Cannot go On Air


Simon Brown
 

Well, the software thinks Pluto is OK, so check antennas, amplifiers etc.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Vincenzo Mone
Sent: 07 October 2021 17:56
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Cannot go On Air

 

Like What?

If I uninstall  and reinstall the program it works but when I go to set it, I get the issue

It gas to be a setting

 

73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520




      *********************************

      ******   GSM  +39 328 7110193  ******

      *****     SMS  +39 328 7110193    *****

      *********************************

 

Da: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Per conto di Simon Brown
Inviato: giovedì 7 ottobre 2021 18:48
A: main@SDR-Radio.groups.io
Oggetto: Re: [SDR-Radio] Cannot go On Air

 

You are now transmitting correctly, so the problem must be elsewhere.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Vincenzo Mone
Sent: 07 October 2021 17:46
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Cannot go On Air

 

No Simon,

I have set as the picture but still no works.

 

 

 

73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520




      *********************************

      ******   GSM  +39 328 7110193  ******

      *****     SMS  +39 328 7110193    *****

      *********************************

 

Da: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Per conto di Simon Brown
Inviato: giovedì 7 ottobre 2021 17:56
A: main@SDR-Radio.groups.io
Oggetto: Re: [SDR-Radio] Cannot go On Air

 

OK,

 

ALC is too low, look at the Master Gain settings. In the TX panel next to Tone click […], here are the gains. I think your Drive is low?

 

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Vincenzo Mone
Sent: 07 October 2021 16:27
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Cannot go On Air

 

Simon,

attached is the screenshot of the Tone and of the Tune.

I am sure I am not getting out as I remember before I made settings

When I TXed the Tone or the Tune, at the maximum driver I could

Hear my 28V Power supply fan going faster and also I hear the Laila from

The satellite that advice to lower the PA.

This does not happens now.

Also if I talk in the microphone I do not see and also do not hear my own signal

So I am sure I have set something g that caused this issue.

 

 

73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520




      *********************************

      ******   GSM  +39 328 7110193  ******

      *****     SMS  +39 328 7110193    *****

      *********************************

 

Da: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Per conto di Simon Brown
Inviato: giovedì 7 ottobre 2021 16:51
A: main@SDR-Radio.groups.io
Oggetto: Re: [SDR-Radio] Cannot go On Air

 

Hi,

 

Below Drive is meter – click to open. If ALC is good then you are transmitting correctly – Sigi – any comments?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Vincenzo Mone
Sent: 07 October 2021 14:14
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Cannot go On Air

 

It is the same.

Now I have attached a screen shot where you can see that I am TXing

The TUNE with the Drive at the maximum and you can see that my signal

is not visible around the green rectangle where it should be.

Thanks

 

73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520




      *********************************

      ******   GSM  +39 328 7110193  ******

      *****     SMS  +39 328 7110193    *****

      *********************************

 

Da: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Per conto di Simon Brown
Inviato: giovedì 7 ottobre 2021 15:07
A: main@SDR-Radio.groups.io
Oggetto: Re: [SDR-Radio] Cannot go On Air

 

Drive is only 22, set to 100!

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Vincenzo Mone
Sent: 07 October 2021 13:49
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Cannot go On Air

 

Hello Simon,

which part you need?

Here is the main screenshot.

Thanks

 

73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520




      *********************************

      ******   GSM  +39 328 7110193  ******

      *****     SMS  +39 328 7110193    *****

      *********************************

 

Da: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Per conto di Simon Brown
Inviato: giovedì 7 ottobre 2021 14:44
A: main@SDR-Radio.groups.io
Oggetto: Re: [SDR-Radio] Cannot go On Air

 

I need a *full screenshot* as an attachment.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Vincenzo Mone
Sent: 07 October 2021 13:34
To: SDR-Radio Console V3 <main@SDR-Radio.groups.io>
Subject: [SDR-Radio] Cannot go On Air

 

Hello Simon,

Hello All,

I hope in an help.

I have a problem after have made the settings in the program.

When I try to send the TUNE or the TONE, on the QO-100 satellite,

I do not see my own signal on the waterfall.

Yes I have the Beacon locked with the Geostationary Window.

It is like the TX is inhibit.

Please any suggestion what it could be?

Thanks

 

73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520




      *********************************

      ******   GSM  +39 328 7110193  ******

      *****     SMS  +39 328 7110193    *****

      *********************************

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

Join main@SDR-Radio.groups.io to automatically receive all group messages.