simon ... what were / are the diameter of the screws (that you should replace with threaded rods and two nuts for finetune distance)

the "lnb arms" are rods with screws on your dish

i remember distance (11cm IIRR ?!?!?) ... but were they 6 or 8mm ?? or 10 ???

greetz sigi dg9bfc

Sigi,

 

FWIW I’m seeing a memory issue. With the current F5OEO firmware:

 

·       Do not use a high bandwidth,

·       In the options window set the buffer sizes to 50ms or lower.

 

Memory allocation for RX and TX is proportional to bandwidth and buffer size in milliseconds.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien
Sent: 29 March 2021 13:22
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Pluto / F5OEO Help Please

 

hello evariste

what "workaround" ??? did you change the ptt thingy ??

would you be so kind and also send that new version to me and explain "the few things" for the ptt support?!?

thank you

dg9bfc

 

Am 29.03.2021 um 10:31 schrieb Evariste Courjaud:

Hi SImon,

I made a few updated (not yet published) to support Rev C and to put workaround for PTT working with sdr-console.
I could send you it and explain few things to make easy support of PTT. Right me a mail at evaristec at gmail.

Most of pluto are provided with at least 0.31 firmware..I didn't test to upgrade from 0.29 (your case..).

Evariste F5OEO

--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.