problem on init of rtl-sdr
I am not sure if this was discussed before.
This is what happens.
When I start the console, if the frequency is with offset (for oscar-100 rx) my waterfall has no visible signals even if it is set to the correct frequency.(there is white noise present)
When I change the frequency to something else and return back to the first frequency, everything works.
I recorded a screen capture at https://yadi.sk/d/sz8KuHXGRdksww
In the first seconds, it is not visible but I am selecting rtl-srd radio..
Then you will see a spectrum without any signals after I change the frequency.