Re: RSP-2 , SDRC, fldigi and TS-590 best practices
toggle quoted messageShow quoted text
Just to let you know you are not alone!
I’ve tried for ages to synchronise an IC7100 with an RSP2 (and others!) and SDRCv3 using Omnirig , no problem, BUT try adding a logging programme such as N1MM - with built in MMvari to control the radio , and it just will not work . I’ve tried VSPE/Com0Com etc with just about all combinations similar to yourself - and have given up . So hopefully somebody else might come along to assist!?
In the case of N1MM it’s due (so I’m told) to it not recognising Omnirig , maybe Fldigi is the same ?
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Greg Hidley via groups.io
Sent: 06 June 2020 23:41
Subject: [SDR-Radio] RSP-2 , SDRC, fldigi and TS-590 best practices
I used fldigi with my Kenwood TS-590 for years, using rigcat for tracking via CP210x USB-UART Bridge (COM9). I now have an RSP-2 running with SDRC V3 and tracking my TS-590 external radio via OmniRig pointed to the same COM9. Every thing work great separately, but I have had trouble using them (SDRC V3 and fldifi) at the same time. I know I would have to use VSPE to create new virtual COM ports to allow such sharing but have had no success doing so so far. Tried creating the following VSPE ports
CP210x Bridge on COM9, 115200
Splitter COM9=>COM4 Use COM4 for RSP2 (via OmniRig!)
Splitter COM4=>COM8 Use COM8 for fldigi