Re: Spectrum display freezes while tuning


Gregg Marco W6IZT <gregg.w6izt@...>
 

Pic attached

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of jdow
Sent: Wednesday, December 18, 2019 21:29
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Spectrum display freezes while tuning

Tuning which frequency and how?
Picture so your settings can be assessed?
{^_^}

On 20191218 13:22:18, Gregg Marco W6IZT wrote:
Is it expected behavior for the spectrum display to freeze while tuning?

Thank you in advance for your assistance.

73

Gregg W6IZT

*From:* gregg.w6izt@... <gregg.w6izt@...>
*Sent:* Wednesday, December 18, 2019 18:35
*To:* SDR-Radio@groups.io
*Subject:* RE: Question using SDR console as a pan adapter with K3

Group:

I was able to resolve # 1 and #3 by changing the protocol of the DXLab
Commander Secondary port from K3 to Kenwood TS-590.

73 HH

Gregg W6IZT

*From:* gregg.w6izt@... <mailto:gregg.w6izt@...>
<gregg.w6izt@... <mailto:gregg.w6izt@...>>
*Sent:* Wednesday, December 18, 2019 17:18
*To:* SDR-Radio@groups.io <mailto:SDR-Radio@groups.io>
*Subject:* Question using SDR console as a pan adapter with K3

Group:

I’m working through configuring SDR console v3 as a panadpater display
for use with a K3. The configuration is as follows:

SDR Console v3.0.17

Win 10 pro Intel I7 gen 8

SDR-IQ

DXLab with Omni-Rig connected to the secondary com port of DXLab
Commander using virtual com ports.

I’ve have run into a couple of issues that I have not been able to resolve:

1. When the K3 mode is set to Data A (USB) the SDR Console displays Data-L.
Using DXLab Commander to change radio mode to Data=L, SDR Console displays
Data-U
2. SDR Console will occasionally display the B VFO frequency of the K3, the
radio is not in split. DX Commander and my amp both display VFO A
properly 3. I’m unable to get the passband on the spectrum display to overlay the actual
passband correctly. I suspect that this is related to #1.

This is a great application!

Any assistance is greatly apricated.

73

Gregg W6IZT

Join main@SDR-Radio.groups.io to automatically receive all group messages.