Spectrum display freezes while tuning


Gregg Marco W6IZT <gregg.w6izt@...>
 

Is it expected behavior for the spectrum display to freeze while tuning?

 

Thank you in advance for your assistance.

 

73

Gregg W6IZT

 

From: gregg.w6izt@... <gregg.w6izt@...>
Sent: Wednesday, December 18, 2019 18:35
To: SDR-Radio@groups.io
Subject: RE: Question using SDR console as a pan adapter with K3

 

Group:

 

I was able to resolve # 1 and #3 by changing the protocol of the DXLab Commander Secondary port from K3 to Kenwood TS-590.

 

73 HH

Gregg W6IZT

 

From: gregg.w6izt@... <gregg.w6izt@...>
Sent: Wednesday, December 18, 2019 17:18
To: SDR-Radio@groups.io
Subject: Question using SDR console as a pan adapter with K3

 

Group:

 

I’m working through configuring SDR console v3 as a panadpater display for use with a K3. The configuration is as follows:

 

SDR Console v3.0.17

Win 10 pro Intel I7 gen 8

SDR-IQ

DXLab with Omni-Rig connected to the secondary com port of DXLab Commander using virtual com ports.

 

I’ve have run into a couple of issues that I have not been able to resolve:

 

  1. When the K3 mode is set to Data A (USB) the SDR Console displays Data-L. Using DXLab Commander to change radio mode to Data=L, SDR Console displays Data-U
  2. SDR Console will occasionally display the B VFO frequency of the K3, the radio is not in split. DX Commander and my amp both display VFO A properly
  3. I’m unable to get the passband on the spectrum display to overlay the actual passband correctly. I suspect that this is related to #1.

 

 

This is a great application!

 

Any assistance is greatly apricated.

 

73

Gregg W6IZT

 

 

 

Join main@SDR-Radio.groups.io to automatically receive all group messages.