- Question using SDR console as a pan adapter with K3
Question using SDR console as a pan adapter with K3
Gregg Marco W6IZT <gregg.w6izt@...>
I’m working through configuring SDR console v3 as a panadpater display for use with a K3. The configuration is as follows:
SDR Console v3.0.17
Win 10 pro Intel I7 gen 8
DXLab with Omni-Rig connected to the secondary com port of DXLab Commander using virtual com ports.
I’ve have run into a couple of issues that I have not been able to resolve:
- When the K3 mode is set to Data A (USB) the SDR Console displays Data-L. Using DXLab Commander to change radio mode to Data=L, SDR Console displays Data-U
- SDR Console will occasionally display the B VFO frequency of the K3, the radio is not in split. DX Commander and my amp both display VFO A properly
- I’m unable to get the passband on the spectrum display to overlay the actual passband correctly. I suspect that this is related to #1.
This is a great application!
Any assistance is greatly apricated.
Join main@SDR-Radio.groups.io to automatically receive all group messages.