Re: Hello Server System Operators (SyOps), Lets get your servers working PLEASE! #sdrsharp #airspyhfplus #sdrplay


Garden Troll <jefferylegere@...>
 

Perhaps this will help Simon.
This is what I get in the logs on my end when I try to connect to Don's server

12:05:27.451: Select Radio> Selecting Radio
12:05:27.452: Radio V3Server> Creating socket
12:05:27.452: Radio V3Server> Connecting to 72.172.110.98::50101, timeout 5 seconds
12:05:27.452: Radio V3Server> Connected
12:05:27.452: Radio V3Server> Sending <SVRMsg xml:lang="EN" Command="Bandwidth" Model="SDRplay RSP2"></SVRMsg>

12:05:27.452: Radio V3Server> Read failure: read = 0 of 20, error code 10054 = Connection reset by peer.
12:05:27.452: Radio V3Server> Failed to read message header
12:05:27.452: Radio V3Server> Close socket
12:05:27.452: Radio V3Server> Closed
12:05:27.453: Server
12:05:27.453:   Closed
12:05:27.453: -
12:05:27.453: Select Radio> Bandwidth List
12:05:27.453: Select Radio> --------------
12:05:27.453: Select Radio> Model ....: SDRplay RSP2
12:05:27.453: Select Radio> Address ..: 72.172.110.98::50101
12:05:27.453: Select Radio> List .....: 30000,40000,50000,75000,100000,125000,150000,200000,250000
12:05:27.453: Select Radio>
12:05:27.702: Select Radio> Initialising
12:05:27.702: Select Radio> ------------
12:05:27.702: Select Radio> Parent class .: CMainFrame
12:05:27.703: Select Radio> -
12:05:27.703: Select Radio> Connecting
12:05:27.703: Select Radio> ----------
12:05:27.703: Select Radio> Address ....: 72.172.110.98::50101
12:05:27.703: Select Radio> Model ......: SDRplay RSP2
12:05:27.703: Select Radio> Serial .....: 1701050400
12:05:27.703: Select Radio> Port .......: 0
12:05:27.703: Select Radio> Soundcard ..:
12:05:27.703: Select Radio> Parent wnd .: 00521120
12:05:27.703: Select Radio> Bandwidth ..: 30000
12:05:27.703: Select Radio> Frequency ..: 1836000
12:05:27.703: Select Radio> PPM ........: 0
12:05:27.704: Select Radio> Converter ..: 0
12:05:27.704: Select Radio> Swap IQ ....: 0
12:05:27.704: Select Radio> -
12:05:27.704: Select Radio> Connect frequency 1836000 = 1836000 + 0 (PPM)
12:05:27.704: Radio V3Server> Creating socket
12:05:27.704: Radio V3Server> Connecting to 72.172.110.98::50101, timeout 5 seconds
12:05:27.704: Radio V3Server> Connected
12:05:27.704: Radio V3Server> Sending <SVRMsg xml:lang="EN" Command="Connect" Username="user" Password="user" Defns="&lt;SDRRadio xml:lang=&quot;EN&quot;&gt;&lt;RadioDefn Accounts=&quot;&quot; Address=&quot;1701050400&quot; Bandwidths=&quot;&quot; DllID=&quot;SDRplay&quot; Enable=&quot;1&quot...
12:05:27.704: Radio V3Server> Read failure: read = 0 of 20, error code 10054 = Connection reset by peer.
12:05:27.704: Radio V3Server> Failed to read message header
12:05:27.704: Select Radio> Status .....: Failed

------ Original Message ------
From: "Finndx" <finndx@...>
Sent: 2/18/2018 5:55:39 AM
Subject: Re: [SDR-Radio] Hello Server System Operators (SyOps), Lets get your servers working PLEASE! #sdrplay #sdrsharp #airspyhfplus

Don,

Don't know if you have changed your settings in the mean time but your account settings are not matching with each other in the Accounts and On Air tabs at the moment.

See this:
https://sdr-radio.groups.io/g/main/message/39323

This is important: "When you get to the On Air tab, MAKE SURE YOU PUT THE SAME username and password from the guest account on the Accounts tab".

Another important thing to notice is that SDR Server's built-in Firewall shouldn't be enabled if siteop doesn't know how to use it. I think this could be the reason for some failing V3 remotes. See blacklist and whitelist logic here:
http://www.sdr-radio.com/Software/Version3/Server/ServerManager

Additionally but not related to the connection problem, I see that you have defined only 50 kHz BW for Internet connections. I'd like to see FM broadcast capable receiver available and online from your location next summer but FM BC requires 200 kHz BW as minimum and this bandwidth contains just one station...

Join main@SDR-Radio.groups.io to automatically receive all group messages.