Re: Problem with SDRConsole
|
paul newcombe <G6YZC@...>
Hi Carl,
I will play with my SDRC ANAN tomorrow, my Sunday QRL wise as I work a day behind, and see if I can work out why I have had a simular problem with the really stable RTL. I reduced the BW of the RTL and it worked fine. You may want to try that with the ANAN jast as an ititial test. I seem to remember there were a couple of options for BW in SDRC when you are selecting the RX.
I will say stick with it as I have found SDRC is the way to head with the ANAN. As Simon says it is not yet completed with all the features he intends to add but what are there work smoothly. Especially setting the different waterfall resolutions. I would love to see Thetis introduce the same method rather than just continuing the clumsy method from PWRSDR. Again I like PWRSDR and Thetis with the exception of that one part.
Paul From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Carl Moreschi <n4py3@...>
Sent: Saturday, September 30, 2017 11:02 PM To: main@SDR-Radio.groups.io Subject: [SDR-Radio] Problem with SDRConsole Hi Simon,
I now have an ANAN 100D. I flashed it with protocol 2. It is working fine with Thetis. But it only stays operational with SDRConsole for about 5 seconds and then SDRC quits operating it. I found out my router does not work with 1 gigabit. So I connected the 100D directly to my ethernet card that does handle 1 gigabit. I then connect to my router via WIFI for internet operation. Windows list WIFI as the first adapter and the ethernet card as the second adapter. Do you have any ideas why SDRC does not work with it but Thetis does? Thanks and best 73, Carl Moreschi N4PY 58 Hogwood Rd Louisburg, NC 27549 www.n4py.com
|
|||
|
|
|||
