Not had that problem. It connected and ran on sdrc with no problems at
all. all problems i had were due to the 100 hub i had conected. Did you
get Thetis to run with your anan? Although the waterfall with sdrc is
far better to see stations on getting Thetis to work should help get
sdrc working.


Sent on a Sprint Samsung Galaxy Note® II


-------- Original message --------
From: Carl Moreschi
Date:09/30/2017 4:35 PM (GMT-05:00)
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Where do I find Protocol 2 firmware

Paul,

You have been very helpful. It looks like my router does not support
gigabit. I connected directly to my lan card and now SDRConsole
discovers the radio. It connects but nothing happens.

Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com <http://www.n4py.com>

On 9/30/2017 1:24 PM, paul newcombe wrote:

Are all of your cat5 connections/hubs/routers etc 1000's ? If you have
any 100s in there you will not see your anan.

If the answer to the above is yes then go back to the bootloader screen
and asign your anan a fixed ip.

Again i know nothing and most people will agree with me about that so
please read up before doing anything i say :)


Sent on a Sprint Samsung Galaxy Note® II


-------- Original message --------
From: Carl Moreschi
Date:09/30/2017 1:17 PM (GMT-05:00)
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Where do I find Protocol 2 firmware

Well after loading the 100D protocol 2 file with HPSDRprogrammer,
nothing can find my 100D now. Now what?

Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com <http://www.n4py.com> <http://www.n4py.com>

On 9/30/2017 12:43 PM, Barry Jablonski wrote:

Good information Paul,

For the 100D you need to go up two levels and follow 100D link:

https://github.com/TAPR/OpenHPSDR-Firmware/tree/91c058115b83cf652200966f377e19cbe3603219/Protocol%202/Angelia%20(ANAN-100D)

Barry
WB2ZXJ