Re: Where do I find Protocol 2 firmware
|
paul newcombe <G6YZC@...>
Not had that problem. It connected and ran on sdrc with no problems at all. all problems i had were due to the 100 hub i had conected. Did you get Thetis to run with your anan? Although the waterfall with sdrc is far better to see stations on getting
Thetis to work should help get sdrc working.
Sent on a Sprint Samsung Galaxy Note® II
-------- Original message --------
From: Carl Moreschi
Date:09/30/2017 4:35 PM (GMT-05:00)
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Where do I find Protocol 2 firmware
Paul,
You have been very helpful. It looks like my router does not support gigabit. I connected directly to my lan card and now SDRConsole discovers the radio. It connects but nothing happens. Carl Moreschi N4PY 58 Hogwood Rd Louisburg, NC 27549 www.n4py.com On 9/30/2017 1:24 PM, paul newcombe wrote: > Are all of your cat5 connections/hubs/routers etc 1000's ? If you have > any 100s in there you will not see your anan. > > If the answer to the above is yes then go back to the bootloader screen > and asign your anan a fixed ip. > > Again i know nothing and most people will agree with me about that so > please read up before doing anything i say :) > > > Sent on a Sprint Samsung Galaxy Note® II > > > -------- Original message -------- > From: Carl Moreschi > Date:09/30/2017 1:17 PM (GMT-05:00) > To: main@SDR-Radio.groups.io > Subject: Re: [SDR-Radio] Where do I find Protocol 2 firmware > > Well after loading the 100D protocol 2 file with HPSDRprogrammer, > nothing can find my 100D now. Now what? > > Carl Moreschi N4PY > 58 Hogwood Rd > Louisburg, NC 27549 > www.n4py.com <http://www.n4py.com> > > On 9/30/2017 12:43 PM, Barry Jablonski wrote: >> Good information Paul, >> >> For the 100D you need to go up two levels and follow 100D link: >> >> > https://github.com/TAPR/OpenHPSDR-Firmware/tree/91c058115b83cf652200966f377e19cbe3603219/Protocol%202/Angelia%20(ANAN-100D) >> >> Barry >> WB2ZXJ >> > > > > |
|
|