Re: sdr as scanner?
toggle quoted message Show quoted text
That would be nice honestly... :)
On Monday, September 11, 2017 2:31 AM, Simon Brown <simon@...> wrote:
I don’t have a scanner at the moment, this will not be in 3.0 but maybe 3.2.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of jem@...
Sent: 11 September 2017 00:28
Subject: [SDR-Radio] sdr as scanner?
One feature I dont see on any software is effective scanning for vhf uhf
Save a few dozen (or hundred) of your favourite spot frequencies (alpha numeric tagging would be good) and set the squelch an press go, just like a traditional scanner. Stop for 30 seconds when it hears something
Also enter a lower frequency and upper frequency and step, and the radio will slide between them stopping when squelch is broken
Oh of course this then leads to more requests, like auto save of active frequencies found, lock out of some spot frequencies or memories when scanning... it never ends.
Another totally unrelated one. that brings to mind is step size.
It would be nice to be able to set steps, 5KHZ/3khz/9-10/ 12.5/25 etc assign those steps to the favourites or just by logic automatically (if rxfreq is >500kHz and <1900KZ then step = 9khz (10 in USA) is what im thinking) Then have "step up/down" buttons.
I use a laptop with no mouse so i have to click every 1kHz which on HF BCB the stations are 5 apart and v/uhf where the channels are 12.5 apart is up to 8 taps
maybe some of this is available in some apps, im a clueless newbie
73 de jem